Download Ibm Ultrium 5 Hh 3580 Tape Drive Drivers

Music Man Stingray 5 Hh 5-string Bass
Download Ibm Ultrium 5 Hh 3580 Tape Drive Drivers
Ernie Ball Music Man Stingray 5 Hh
Musicman Stingray 5 Hh Sky Blue

Spectrum Protect Server supports the following media for LTO-7 drives: Ultrium 5. The IBM device driver is. Tape drivers and software -> Tape device drivers. Latest download for IBM ULTRIUM 5 HH 3580 TAPE DRIVE driver. Improve your pc peformance with this new update.

IBM United States Sales Manual
Revised: January 22, 2019.

Table of contents

Product life cycle dates	Publications
Abstract	Features
Highlights	Accessories
Description	Machine elements
Models	Supplies
Technical description

Product life cycle dates

Type Model	Announced	Available	Marketing Withdrawn	Service Discontinued
8233-E8B	2010/02/09	2010/02/19	2014/01/03	2019/09/30

Abstract

The IBM Power 750 Express server (8233-E8B) supports up to four of thefollowing processor cards in a rack-mount drawer configuration: 6-core3.3 GHz (#8335) 8-core 3.0 GHz (#8334) 8-core 3.3 GHz (#8332); 8-core3.5 GHz (#8336) 8-core 3.6 GHz (#EPA1) 6-core 3.7 GHz (#EPA2); 4-core3.7 GHz (#EPA3) 8-core 3.2 GHz (#EPA4)The POWER7 processors in this server are 64-bit, 4-core, 6-core and8-core modules packaged on dedicated processor cards with 4 MB of L3cache/core and 256 KB of L2 cache/core.'

Model abstract 8233-E8B

TheIBM 8233 Power 750 Express Server Model E8B has POWER7 processors thatoffer 4-core to 32-core configuration options.

Highlights

The Power 750 Express server is a powerful 1-to 4-socket server thatsupports up to 32 cores with the configuration flexibility to meettoday's growth and tomorrow's processing needs. The server features:

Powerful POWER7 processors that offer4-core to 32-core configuration options
- Five PCI slots in the system unit
- Eight disk/solid-state disk (SSD) SAS SFF (small form factor) bays --up to 2.4 TB
- Slimline DVD-RAM
- Half-high bay for tape or removable drive
- Integrated SAS/SATA controller for disk/SSD/DVD
- Optional 175 MB RAID write cache for disk/SSD
- Integrated Virtual Ethernet ports (four 1 Gb or two 10 Gb)
Rack-mount configuration
EnergyScale(TM) technology

Description

The Power 750 Express server supports a maximum of 32 DDR3 DIMM slots,eight per processor card. Memory features (two memory DIMMs per feature)supported are 8 GB, 16 GB, and 32 GB and run at speeds of 1066 MHz. Asystem with four processor cards installed has a maximum memory of 512GB. Also, the optional Active Memory Expansion can allow the effectivemaximum memory capacity to be much larger than the true physical memory.Innovative compression/decompression of memory content using processorcycles can allow memory expansion up to 100%. A server with a maximum of512 GB can effectively be expanded up to 1 TB. This can enhancevirtualization and server consolidation by allowing a partition to dosignificantly more work with the same physical amount of memory or aserver to run more partitions and do more work with the same physicalamount of memory.

The Power 750 Express server provides great I/O expandability. Forexample, with 12X-attached I/O drawers, you can have up to 50 PCI-X slotsor up to 41 PCIe slots. This combination can provide over 100 LAN portsor over 72 WAN ports, or up to 576 disk drives (over 240 TB diskstorage). Extensive quantities of externally attached storage and tapedrives and libraries can also be attached.

The Power 750 Express system unit without I/O drawers can contain amaximum of either eight SFF SAS disks or eight SFF SAS SSDs, providing upto 2.4 TB. All disks and SSDs are direct dock and hot pluggable. Theeight SAS bays can be split into two sets of four bays for additionalAIX/Linux configuration flexibility. The system unit also contains aslimline DVD-RAM, plus a half-high media bay for an optional tape driveor removable disk drive.

Also available in the Power 750 system unit is a choice of quadgigabit or dual 10 Gb integrated host Ethernet adapters. These nativeports can be selected at the time of initial order. Virtualization ofthese integrated Ethernet adapters is supported.

Other integrated features include:

Five expansion slots
- Optional 175 MB RAID write cache to augment disk/SSD performance andfunction
EnergyScale(TM) technology
Two system ports and three USB ports
Two hardware management console (HMC) ports and two SPCN ports
Redundant and hot-swap power
Redundant and hot-swap cooling

Power 750

Summary of standard features:

Rack-mount (4U) configuration
4-, 8-, 12-, and 16-core design with one, two, three, or four 3.7 GHzprocessor cards; 6-, 12-, 18-, and 24-core design with one, two, three,or four 3.3 or 3.7 GHz processor cards; 8-, 16-, 24-, and 32-coredesign with one, two, three or four 3.0, 3.2, 3.3, 3.5, or 3.6 GHzprocessor cards
8 GB of PC3-8500 1066 MHz ECC memory (error checking and correcting)memory, expandable to 128 GB per processor card (512 GB system maximum)
Note: The 8 GB memory feature (#4526) is planned to be available on March15, 2010.
8 x 2.5-inch DASD/SSD/Media backplane with an external SAS port
- Quad-port 1 Gb IVE
- Dual-port 10 Gb IVE
Two media bays:
- Two PCIe x8 slots, short card length (slots 1 and 2)
- One PCIe x8 slot, full card length (slot 3)
- Two PCIX DDR slots, full card length (slots 4 and 5)
- One GX+ slot (shares same space as PCIe x8 slot 2)
- One GX++ slot (shares same space as PCIe x8 slot 1)

Integrated:

The total memory (based on the number of cores) and the quantity/sizeof disk, SSD, Fibre Channel adapters, or Fibre Channel over Ethernet(FCoE) adapters shipped with the server are the only features thatdetermine if a customer is entitled to a processor activation at noadditional charge.

Specifically, with an IBM Edition, processor activations for theprocessor card options are:

3.3 GHz 6-core processor cards
- 4 x #7714 (chargeable) and 4 x #2324 (no-charge) with 8-core (1 x#8334) configuration
- 8 x #7714 (chargeable) and 8 x #2324 (no-charge) with 16-core (2 x#8334) configuration
- 12 x #7714 (chargeable) and 12 x #2324 (no-charge) with 24-core (3 x#8334) configuration
- 16 x #7714 (chargeable) and 16 x #2324 (no-charge) with 32-core (4 x#8334) configuration
3.3 GHz 8-core processor cards
- 4 x #7716 (chargeable) and 4 x #2326(no-charge) with 8-core (1 x #8336) configuration.
- 8 x #7716 (chargeable) and 8 x #2326(no-charge) with 16-core (2 x #8336) configuration.
- 12 x #7716 (chargeable) and 12 x #2326(no-charge) with 14-core (3 x #8336) configuration.
- 16 x #7716 (chargeable) and 16 x #2326 (no-charge) with 32-core (4 x#8336) configuration
3.6 GHz 8-core processor cards (#EPA1)
- 4 x #EPB1 (chargeable) and 4 x#EPF1 (no-charge) with 8-core (1 x #EPA1) configuration
- 8 x #EPB1(chargeable) and 8 x #EPF1 (no-charge) with 16-core (2 x #EPA1)configuration
- 12 x #EPB1 (chargeable) and 12 x #EPF1 (no-charge) with24-core (3 x #EPA1) configuration
- 16 x #EPB1 (chargeable) and 16 x #EPF1(no-charge) with 32-core (4 x #EPA1) configuration
3.7 GHz 6-core processor cards (#EPA2)
- 3 x #EPB2 (chargeable) and 3 x#EPF2 (no-charge) with 6-core (1 x #EPA2) configuration
- 6 x #EPB2(chargeable) and 6 x #EPF2 (no-charge) with 12-core (2 x #EPA2)configuration
- 9 x #EPB2 (chargeable) and 9 x #EPF2 (no-charge) with18-core (3 x #EPA2) configuration
- 12 x #EPB2 (chargeable) and 12 x #EPF2(no-charge) with 24-core (4 x #EPA2) configuration
3.7 GHz 4-core processor cards (#EPA3)
- 2 x #EPB3 (chargeable) and 2 x#EPF3 (no-charge) with 4-core (1 x #EPA3) configuration
- 4 x #EPB3(chargeable) and 4 x #EPF3 (no-charge) with 8-core (2 x #EPA3)configuration
- 6 x #EPB3 (chargeable) and 6 x #EPF3 (no-charge) with12-core (3 x #EPA3) configuration
- 8 x #EPB3 (chargeable) and 8 x #EPF3(no-charge) with 16-core (4 x #EPA3) configuration
3.2 GHz 8-core processor cards (#EPA4)
- 4 x #EPB4 (chargeable) and 4 x#EPF4 (no-charge) with 8-core (1 x #EPA4) configuration
- 8 x #EPB4(chargeable) and 8 x #EPF4 (no-charge) with 16-core (2 x #EPA4)configuration
- 12 x #EPB4 (chargeable) and 12 x #EPF4 (no-charge) with24-core (3 x #EPA4) configuration
- 16 x #EPB4 (chargeable) and 16 x #EPF4(no-charge) with 32-core (4 x #EPA4) configuration

When you purchase an IBM Edition, you can purchase an AIX, IBM i, orLinux operating system license, or you may choose to purchase thesystem with no operating system. The AIX, IBM i, or Linux operatingsystem is processed via a feature number on AIX 5.3 or 6.1, IBM i6.1.1, and SUSE Linux Enterprise Server. If you choose AIX 5.3 or6.1 for your primary operating system, you can also order IBM i6.1.1 and SUSE Linux Enterprise Server. The converse is true if youchoose an IBM i or Linux subscription as your primary operating system.

These sample configurations can be changed as needed and still qualifyfor processor entitlements at no additional charge. However, selectionof total memory or DASD/SSD/Fibre Channel/FCoE adapter quantities smallerthan the totals defined as the minimums disqualifies the order as an IBMEdition and the no-charge processor activations are then removed.

Processor activations are only available to Solution DeliveryIntegration (SDIs) as MES orders.

Processor cards ordered separately after the initial order are noteligible for no-charge processor activations.

Edition minimum memory definition details:

A minimum of 4 GB memory per core is needed to qualify for the IBMEdition, except on the 6-core IBM Edition where there is a 32 GB minimummemory requirement. For example, a 6-core minimum is 32 GB, an 8-coreminimum is 32 GB, and a 12-core minimum is 48 GB. There can be manydifferent valid memory configurations that meet the minimum 4 GB per corerequirement. For example:

4-core (16 GB minimum) -- 2 x 8 GB (2 x 4 GB DIMMs) Memory (#4526)
- Also, 2 x 16 GB (2 x 8 GB DIMMs) Memory (#4527)
- Also, 1 x 32 GB (2 x 16 GB DIMMs) Memory (#4528)
8-core (32 GB minimum) -- 4 x 8 GB (2 x 4 GB DIMMs) Memory (#4526)
- Also, 3 x 16 GB (2 x 8 GB DIMMs) Memory (#4527)
- Also, 2 x 32 GB (2 x 16 GB DIMMs) Memory (#4528)
16-core (64 GB minimum)-- 8 x 8 GB (2 x 4 GB DIMMs) Memory (#4526)
- Also, 5 x 16 GB (2 x 8 GB DIMMs) Memory (#4527)
- Also, 3 x 32 GB (2 x 16 GB DIMMs) Memory (#4528)
24-core (96 GB minimum) -- 12 x 8 GB (2 x 4 GB DIMMs) Memory (#4526)
- Also, 8 x 16 GB (2 x 8 GB DIMMs) Memory (#4527)
- Also, 4 x 32 GB (2 x 16 GB DIMMs) Memory (#4528)

Note: The 8 GB memory feature (#4526) is planned to be available on March16, 2010.

Note: In the memory requirements, #EM08 can replace #4526, #EM16 canreplace #4527, and #EM32 can replace #4528.

Note: You can also mix different size memory features on the same serverand meet the minimum memory requirements for the IBM Edition benefit aslong as at least 4 GB per core is attained. For example, the 1 x 16 GBmemory feature (#4527) can replace the 2 x 8 GB feature (#4526).However, all memory features on an individual processor card must beidentical.

Edition minimum Disk/SSD/Fibre Channel/FCoE definition details:

Minimum of: Two DASD, or two SSD, or two Fibre Channel adapters, ortwo FCoE adapters. You only need to meet one of this disk/SSD/FC/FCoEcriteria. Partial criteria cannot be combined.
- Two SAS disk drives -- any capacity drives located in the systemunit, feature 5802 I/O drawer, or feature 5886 disk drawer qualify.
- Two SAS SSDs -- drives located in the system unit, feature 5802 I/Odrawer, or feature 5886 disk drawer qualify.
- Two Fibre Channel adapters -- Either PCI-X or PCI-E adapters locatedin the system unit or 12X-attached I/O drawer.
- Two Fibre Channel over Ethernet adapters -- Either PCI-X or PCI-Eadapters located in the system unit or 12X-attached I/O drawer.

Multiple sample POWER7 IBM Edition configurations are provided in theIBM internal configurator tool, including:

Four 3.3 GHz 6-core processor card configurations (6-core, 12-core,18-core, and 24-core)
Four 3.0 GHz 8-core processor card configurations (8-core, 16-core,24-core, and 32-core)
Four 3.3 GHz 8-core processor card configurations (8-core, 16-core,24-core, and 32-core)
Four 3.5 GHz 8-core processor card configurations 8-core, 16-core,24-core, 32-core.

Dynamic logical partitioning

The dynamic logical partitioning (LPAR) function provides enhancedresource management for the Power 750 Express server. Dynamic LPARallows available system resources to be quickly and easily configuredacross multiple logical partitions to meet the rapidly changing needs ofyour business.

Dynamic LPAR also allows you to add new system resources such as newhot-plug PCI adapters into your system's configuration without requiringa reboot. Without the optional PowerVM Standard Edition (#7794) orPowerVM Enterprise Edition (#7795) feature, as many as 32 LPARs aresupported in a 32-core Power 750. If the PowerVM Standard or EnterpriseEdition feature is installed in the system, a maximum of 10 dynamic LPARsfor each physical processor can be defined, with a system maximum of 320dynamic LPARs.

An HMC or IVM is required to manage POWER7 processor-based serversimplementing partitioning. Multiple POWER7 processor-based servers canbe supported by a single HMC.

If an HMC is used to manage any POWER7 processor-based server, the HMCmust be a CR3, or later, model rack-mount HMC or C05, or later, desksideHMC.

When IBM Systems Director is used to manage an HMC or if the HMCmanages more than 254 partitions, the HMC should have 3 GB of RAM minimumand be CR3 model, or later, rack-mount or C06, or later, deskside.

PowerVM Editions (optional)

Three optional PowerVM Edition features are now available on the Power750: PowerVM Express Edition, PowerVM Standard Edition, and PowerVMEnterprise Edition. These are managed using built-in IntegratedVirtualization Manager (IVM) software or optionally through use of anHMC.

PowerVM Standard Edition (#7794) and PowerVM Enterprise Edition(#7795) allow customers to create partitions in units of less than 1 CPU(sub-CPU LPARs) and allow the same system I/O to be virtually added tothese partitions. The optional features, available for a fee, alsoinclude a software component that provides cross-partition workloadmanagement.

PowerVM Standard and Enterprise Editions offer:

The CBU specify feature 0444 is available only as part of a new serverpurchase. Certain system prerequisites must be met and systemregistration and approval are required before the CBU specify feature canbe applied on a new server. Standard IBM i terms and conditions do notallow either IBM i processor license entitlements or 5250 OLTP(Enterprise Enablement) entitlements to be transferred permanently ortemporarily. These entitlements remain with the machine they wereordered for. When you register the association between your primary andon-order CBU system, you must agree to certain terms and conditionsregarding the temporary transfer.

After a CBU system designation is approved and the system isinstalled, you can temporarily move your optional IBM i processor licenseentitlement and 5250 Enterprise Enablement entitlements from the primarysystem to the CBU system when the primary system is down or while theprimary system processors are inactive. The CBU system can then bettersupport failover and role swapping for a full range of test, disasterrecovery, and high availability scenarios. Temporary entitlementtransfer means that the entitlement is a property transferred from theprimary system to the CBU system and may remain in use on the CBU systemas long as the registered primary and CBU system are in deployment forthe high availability or disaster recovery operation.

The primary system for a Power 750 (8233-E8B) server can be:

For example, if you have a 6-core Power 750 as your primary systemwith two IBM i processor license entitlements (one above the minimum) andtwo 5250 Enterprise Enablement entitlements (one above the minimum), youcan temporarily transfer only one IBM i entitlement and one 5250Enterprise Enablement entitlement. During the temporary transfer, theCBU system's internal records of its total number of IBM i processorentitlements is not updated, and you may see IBM i license noncompliancewarning messages from the CBU system.

If your primary or CBU machine is sold or discontinued from use, anytemporary entitlement transfers must be returned to the machine on whichthey were originally acquired. For CBU registration and furtherinformation, visit:

Feature 5802 provides PCIe slots and SSF SAS disk slots.

Feature 5877 provides PCIe slots.

Feature 5796 provides PCI-X slots.

The 7314-G30 provides PCI-X slots (supported but not orderable).

Three disk-only I/O drawers are also supported, providing largestorage capacity and multiple partition support:

Component integration
Rack integration
Operating system preinstallation
Unit personalization
Third-party hardware/software installation
Customer Specified Placement

Asset tagging

Remote access Partitioning Customized operating system/firmware

For more information on Deployment-ready Services, refer to:

Special Uncorrectable Error (SUE) handling was an IBM innovationintroduced for POWER5 processors, where an uncorrectable error in memoryor cache does not immediately cause the system to terminate. Rather, thesystem tags the data and determines whether it will ever be used again.If the error is irrelevant, it will not force a checkstop.

PCI extended error handling

PCI extended error handling (EEH) enabled adapters respond to aspecial data packet generated from the affected PCI slot hardware bycalling system firmware, which will examine the affected bus, allow thedevice driver to reset it, and continue without a system reboot. ForLinux, EEH support extends to the majority of frequently used devices,although some third-party PCI devices may not provide native EEH support.

Predictive failure and dynamic component deallocation

Servers with POWER processors have long had the capability to performpredictive failure analysis on certain critical components such asprocessors and memory. When these components exhibit symptoms that wouldindicate a failure is imminent, the system can dynamically deallocate andcall home about the failing part before the error is propagated system-wide. In many cases, the system will first attempt to reallocateresources in such a way that will avoid unplanned outages. In the eventthat insufficient resources exist to maintain full system availability,these servers will attempt to maintain partition availability by user-defined priority.

Uncorrectable error recovery

When the auto-restart option is enabled, the system can automaticallyrestart following an unrecoverable software error, hardware failure, orenvironmentally induced (ac power) failure.

Serviceability

The purpose of serviceability is to repair the system while attemptingto minimize or eliminate service cost (within budget objectives), whilemaintaining high customer satisfaction. Serviceability includes systeminstallation, MES (system upgrades/downgrades), and systemmaintenance/repair. Depending upon the system and warranty contract,service may be performed by the customer, an IBM representative, or anauthorized warranty service provider.

The serviceability features delivered in this system provide a highlyefficient service environment by incorporating the following attributes

Design for Customer Set Up (CSU), Customer Installed Features (CIF),and Customer Replaceable Units (CRU)
Error detection and Fault Isolation (ED/FI)
First Failure Data Capture (FFDC)
Converged service approach across multiple IBM server platforms

Service environments

The HMC is a dedicated server that provides functions for configuringand managing servers for either partitioned or full-system partitionusing a GUI or command-line interface (CLI). An HMC attached to thesystem allows support personnel (with client authorization) to remotelylog in to review error logs and perform remote maintenance if required.

The POWER7 processor-based platforms support two main serviceenvironments:

Attachment to one or more HMCs is a supported option by the system.This is the default configuration for servers supporting logicalpartitions with dedicated or virtual I/O. In this case, all servers haveat least one logical partition.
No HMC. There are two service strategies for non-HMC systems
- Full system partition: A single partition owns all the serverresources and only one operating system may be installed.
- Partitioned system: In this configuration, the system can have morethan one partition and can be running more than one operating system. Inthis environment, partitions are managed by the Integrated VirtualizationManager (IVM), which provides some of the functions provided by the HMC.

Service Interface

The Service Interface allows support personnel to communicate with theservice support applications in a server using a console, interface, orterminal. Delivering a clear, concise view of available serviceapplications, the Service Interface allows the support team to managesystem resources and service information in an efficient and effectiveway. Applications available via the Service Interface are carefullyconfigured and placed to give service providers access to importantservice functions.

Different service interfaces are used, depending on the state of thesystem and its operating environment. The primary service interfacesare:

Provide a common error code format equivalent to a system referencecode, system reference number, checkpoint, or firmware error code.
Provide fault detection and problem isolation procedures. Supportremote connection ability to be used by the IBM Remote Support Center orIBM Designated Service.
Provide interactive intelligence within the diagnostics with detailedonline failure information while connected to IBM's back-end system.

Automatic diagnostics

Because of the FFDC technology designed into IBM Servers, it is notnecessary to perform re-create diagnostics for failures or require userintervention. Solid and intermittent errors are designed to be correctlydetected and isolated at the time the failure occurs. Runtime andboottime diagnostics fall into this category.

Stand-alone diagnostics

As the name implies, stand-alone or user-initiated diagnostics requireuser intervention. The user must perform manual steps, including:

Integrated in the operating system in addition to the HMC, ElectronicService Agent is designed to automatically and electronically reportsystem failures and customer-perceived issues to IBM, which can result infaster problem resolution and increased availability. Systemconfiguration and inventory information collected by Electronic ServiceAgent also can be viewed on the secure Electronic Services Web portal andused to improve problem determination and resolution between the customerand the IBM support team. As part of an increased focus to provide evenbetter service to IBM customers, Electronic Service Agent toolconfiguration and activation comes standard with the system. In supportof this effort, a new HMC External Connectivity security whitepaper hasbeen published, which describes data exchanges between the HMC and theIBM Service Delivery Center (SDC) and the methods and protocols for thisexchange. To read the whitepaper and prepare for Electronic ServiceAgent installation, go to the 'Reference Guide' section at:

Select your country.

Click on 'IBM Electronic Service Agent Connectivity Guide.'

Benefits

Increased uptime: Electronic Service Agent is designed toenhance the warranty and maintenance service by providing faster hardwareerror reporting and uploading system information to IBM Support. Thiscan optimize the time monitoring the symptoms, diagnosing the error, andmanually calling IBM Support to open a problem record. And 24 x 7monitoring and reporting means no more dependency on human interventionor off-hours customer personnel when errors are encountered in the middleof the night.

Security Electronic Service Agent is secure in monitoring,reporting, and storing the data at IBM. Electronic Service Agentsecurely transmits via the Internet (HTTPS or VPN) and can be configuredto communicate securely through gateways to provide customers a singlepoint of exit from their site. Communication between the customer andIBM only flows one way; activating Service Agent does not enable IBM tocall into a customer's system. System inventory information is stored ina secure database, which is protected behind IBM firewalls. Thecustomer's business applications or business data is never transmitted toIBM.

More accurate reporting Because system information anderror logs are automatically uploaded to the IBM Support Center inconjunction with the service request, customers are not required to findand send system information, decreasing the risk of misreported ormisdiagnosed errors. Once inside IBM, problem error data is run througha data knowledge management system and knowledge articles are appended tothe problem record.

Customized support Using the IBM ID entered duringactivation, customers can view system and support information in the 'MySystems' and 'Premium Search' sections of the Electronic Services Website.

The Electronic Services Web portal is a single Internet entry pointthat replaces the multiple entry points traditionally used to access IBMInternet services and support. This Web portal enables you to gaineasier access to IBM resources for assistance in resolving technicalproblems. The newly improved My Systems and Premium Search functionsmake it even easier for Electronic Service Agent-enabled customers totrack system inventory and find pertinent fixes.

My Systems provides valuable reports of installed hardware andsoftware using information collected from the systems by IBM ElectronicService Agent. Reports are available for any system associated with thecustomer's IBM ID. Premium Search combines the function of search andthe value of Electronic Service Agent information, providing advancedsearch of the technical support knowledgebase. Using Premium Search andthe Service Agent information that has been collected from the system,customers are able to see search results that apply specifically to theirsystems.

For more information on how to utilize the power of IBM ElectronicServices, visit the following Web site or contact an IBM Systems ServicesRepresentative:

Accessibility by people with disabilities

A U.S. Section 508 Voluntary Product Accessibility Template (VPAT)containing details on accessibility compliance can be requested at:

Section 508 of the US Rehabilitation Act

IBM Power 750 Express server is capable as of February 19, 2010, whenused in accordance with associated IBM documentation, of satisfying theapplicable requirements of Section 508 of the Rehabilitation Act,provided that any assistive technology used with the product properlyinteroperates with it. A U.S. Section 508 Voluntary ProductAccessibility Template (VPAT) can be requested via the IBM Web site:

Models

Model summary matrix

Model	Processor Type	Clock Rate 6-core	Clock Rate 8-core	System Memory	Internal Storage	Slots/Bays
E8B	POWER7	3.3 GHz	3.0 GHz, 3.2 GHz, 3.3 GHz,3.5 GHz, 3.6 GHz, 3.7 GHz	8 GB/512 GB	2400 GB (2 1/2' DASD)	5 Slots /8 2.5' DASD bays; 2 mediabays

Customer setup (CSU)

Yes.

Devices supported

The following external machine types are supported on the indicatedmodels for MT 8233.

This list is not all inclusive. Many devices are supported throughstandard ports. Please refer to the sales manual of the external machinetype and the list of supported devices in the appropriate section of theAIX sales manual for further attach support information.

Model conversions

Not available.

Feature Conversions

The existing components being replaced during a model or featureconversion become the property of IBM and must be returned.

Feature conversions are always implemented on a 'quantity of one forquantity of one' basis. Multiple existing features may not be convertedto a single new feature. Single existing features may not be convertedto multiple new features.

The following conversions are available to customers:

Feature conversions for 8233-E8B virtualization enginefeatures

Feature conversions for 8233-E8B solid state drivefeatures

Technical description

Physical specifications	Operating environment	Limitations
Hardware requirements	Software requirements

Physical specifications

Rack-Mount:

2.0 kVa (maximum configuration)
Maximum altitude: 3,050 m (10,000 ft)

Noise level and sound power

Two 3.3 GHz 6-core processors, sixteen 8 GB DIMMs, two powersupplies, eight SFF disks, one DVD, three PCI adapters: 6.4 belsidle/6.2 bels operating
Two 3.3 GHz 6-core processors, sixteen 8 GB DIMMs, two powersupplies, eight SFF disks, one DVD, three PCI adapters with acousticaldoors: 5.8 bels idle/5.6 bels operating
Four 3.3 GHz 6-core processors, thirty-two 8 GB DIMMs, two powersupplies, eight SFF disks, one DVD, three PCI adapters: 7.1 belsidle/7.1 bels operating
Four 3.3 GHz 6-core processors, thirty-two 8 GB DIMMs, two powersupplies, eight SFF disks, one DVD, three PCI adapters with acousticaldoors: 6.5 bels idle/6.5 bels operating

EMC conformance classification

This equipment is subject to FCC rules and shall comply with theappropriate FCC rules before final delivery to the buyer or centers ofdistribution.

Homologation -- Telecom environmental testing (Safety andEMC)

Homologation approval for specific countries has been initiated withthe IBM Homologation and Type Approval (HT&A) organization in LaGaude,France. This Power Systems model and applicable features meet theenvironmental testing requirements of the country telecom and have beendesigned and tested in compliance with the Full Quality AssuranceAssurance Approval (FQAA) process as delivered by the British ApprovalBoard for Telecom (BABT), the U.K. Telecom regulatory authority.

Product safety/Country testing/Certification

#0835 -- #4327 (70.56 GB 15K RPM HDD) Load Source Specify
#0836 -- #4328 (141.12 GB 15K RPM HDD) Load Source Specify
#0838 -- #3676 (69.7 GB 15K RPM HDD) Load Source Specify
#0839 -- #3677 (139.5 GB 15K RPM HDD) Load Source Specify
#0840 -- #3678 (283.7 GB 15K RPM HDD) Load Source Specify
#0841 -- #4329 (282.25 GB 15K RPM HDD) Load Source Specify
#0844 -- #3658 (428 GB 15K RPM HDD) Load Source Specify
#0851 -- #1884 (69.7 GB 15K RPM SFF HDD) Load Source Specify
#0853 -- #1888 (138 GB 15K RPM SFF HDD) Load Source Specify
#0854 -- #1890 (69 GB SFF SSD) Load Source Specify
#0855 -- #3586 (69 GB SSD) Load Source Specify

If IBM i (#2145) is selected and the load source disk unit is not inthe CEC (system unit), one of the following specify codes must also beselected:
- #5550 -- System Console on HMC
- #5553 -- System Console - Internal LAN

Processor cards

A minimum of one processor card is required on an order with amaximum of 32 processor cores on four processor cards.
One, two, three, or four 4-core 3.7GHz (#EPA3), 6-core 3.3 GHz (#8335)/3.7 GHz (#EPA2), or 8-core 3.0GHz(#8332)/3.2 GHz(#EPA4)/3.3 GHz (#8334)/3.5 GHz (#8336)/3.6 GHz(#EPA1) processor cards may be installed in a system.
Processor cards (#8332, #8334, #8335,#8336, #EPA1, #EPA2, #EPA3, and #EPA4) may not be mixed in the system.
All processors must be activated.
- The 6-core 3.3 GHz processor card (#8335) requires that six processoractivation codes be ordered. A maximum of six processor activation codefeatures (6 x #7717, or 3 x #7717 and 3 x #2327) are allowed perprocessor card.
- The 8-core 3.0 GHz processor card (#8334) requires that eightprocessor activation codes be ordered. A maximum of eight processoractivation code features (8 x #7714, or 4 x #7714 and 4 x #2324) areallowed per processor card.
- The 8-core 3.55 GHz processor card (#8336) requires that eightprocessor activation codes be ordered. A maximum of eight processoractivation code features (8 x #7716, or 4 x #7716 and 4 x #2326) areallowed per processor card.
- The 8-core 3.3 GHz processor card (#8332) requires that eightprocessor activation codes be ordered. A maximum of eight processoractivation code features (8 x #7715, or 4 x #7715 and 4 x #2325) areallowed per processor card.
- The 4-core 3.7 GHz processor card (#EPA3) requires that fourprocessor activation codes be ordered. A maximum of four processoractivation code features (4 x #EPB3, or 2 x #EPB3 and 2 x #EPF3) areallowed per processor card.
- The 6-core 3.7 GHz processor card (#EPA2) requires that six processoractivation codes be ordered. A maximum of six processor activationcode features (6 x #EPB1, or 3 x #EPB1 and 3 x #EPF1) are allowed perprocessor card.
- The 8-core 3.2 GHz processor card (#EPA4) requires that eightprocessor activation codes be ordered. A maximum of eight processoractivation code features (8 x #EPB4, or 4 x #EPB4 and 4 x #EPF4) areallowed per processor card.
- The 8-core 3.6 GHz processor card (#EPA1) requires that eightprocessor activation codes be ordered. A maximum of eight processoractivation code features (8 x #EPB1, or 4 x #EPB1 and 4 x #EPF1) areallowed per processor card.

Power supply

The base machine must contain two AC (#7740) or two DC (#7708)power supplies.

Redundant fans

Redundant fans standard

Power cords

Two power cords are required. The DC power supply feature#7708 includes a power cord. A power cord must be orderedfor each AC power supply (#7740) ordered.

The Power 750 requires 200-240 V for all configurations.

System memory

A minimum 8 GB or two DIMMs of memory is required on the Power 750system.
Eight memory DIMM slots are on a processor card. The maximum systemmemory with one processor card is 128 GB. The maximum system memory is512 GB with four processor cards.
Different system memory feature numbers may not be mixed on the sameprocessor card. However, a system with more than one processor card mayused different memory feature numbers on the same system.
Memory must be installed in groups of 1 feature (2 DIMMs), 2 features(4 DIMMs), or 4 features (8 DIMMs) per processor card. Installation of 3features (6 DIMMs) is not permitted.
It is generally recommended that memory be installed evenly acrossall processor cards in the system. Balancing memory across the installedprocessor cards allows memory access in a consistent manner and typicallyresults in the best possible performance for your configuration.However, balancing memory fairly evenly across multiple processor cards,compared to balancing memory exactly evenly typically has a very smallperformance difference.

Plans for future memory upgrades should be taken into account whendeciding which memory feature size to use at the time of initial systemorder.

Figure 1. Memory features:

Choose 8 GB minimum memory from:
- EXP24 drawers/towers are attached to a PCI-X SCSI adapter via one ormore SCSI cables.
- The system maximum is 24.
Feature number 5886 EXP12S SAS DASD Expansion Drawer
- Feature number 8340 supports one feature number 5886 drawer directlyoff the system unit's SAS port.
- EXP12S drawers are attached to a PCI-X or PCIe SAS adapter via SAScables.
- The system maximum is 48.
Feature number 5802 12X I/O Drawer PCIe SFF Disk and feature number5877 12X I/O Drawer PCIe No Disks
- 12X DDR cables for the feature 5802 and 5877 I/O drawers
- 12X SDR or DDR cables for the feature 5796 and 7314-G30 I/O drawers
Power control cables

12X I/O drawer cable connections are always made in loops to helpprotect against a single point-of-failure resulting from an open,missing, or disconnected cable. A system with nonlooped configurationscould experience degraded performance and serviceability. If a nonloopconnection is detected, a problem is reported.

The first 12X I/O drawer attached in any I/O drawer loop requires twodata transfer cables. Each additional drawer in the loop (up to themaximum allowed) requires one additional data transfer cable.

The first 12X I/O drawer attached to a system unit requires two powercontrol cables. Each additional I/O drawer added to a system requiresone additional power control cable. Each system has one power controlloop. All I/O drawers attached to a system are included in the samepower control loop. Power control cable loops are different in thisregard from data transfer cable loops.

Dual-Port 12X Adapter Options

Dual-Port 12X Channel Attach Adapter (#6446): Use the short runadapter for feature 5796 or 7314-G30 expansion I/O drawers located inclose proximity to the host system or to other drawers in the I/Oexpansion loop. This adapter does not include signal repeaters.

Dual-Port 12X Channel Attach Adapter (#6457): Use the long runadapter for feature 5796 or 7314-G30 expansion I/O drawers locatedfarther from the host system or other I/O drawers in the I/O expansionloop. This adapter includes signal repeaters to accommodate the longercable lengths.

12X Cable Choice

Each feature 5796 or 7314-G30 12X drawer requires one Dual-Port 12XChannel Adapter, either Short Run (#6446) or Long Run (#6457). Thechoice of adapters is dependent on the distance to the next 12X Channelconnection in the loop, either to another I/O drawer or the system unit.The following table identifies the supported cable lengths for each 12XChannel adapter. I/O drawers containing the Short Run adapter can bemixed in a single loop with I/O drawers containing the Long Run adapter.In this table, a 'Yes' indicates that the 12X cable identified in thatcolumn can be used to connect the drawer configuration identified to theleft. A 'No' means it cannot be used. The 12X DDR or SDR cables can beused with the feature 5796 or 7314-G30.

Note: (1) The 0.6M and 1.5M 12X cables (#1829/#1830 or #1861/#1862) havevery limited use due to their short length. They cannot be used toconnect to a system drawer because of the short length. They areintended for use between two feature 5796 or 7314-G30 drawers mountedside by side in the same enclosure (#7314). They can also be used toconnect between two modules located one beneath the other in a 19-inchrack.

Note: (2) It is possible in some limited configurations to use the 3.0 M,12X cable (#1840 or #1865) to locate 5796 modules in adjacent racks. Thecable length requires careful management of each drawer location withinthe rack. The best choice for connecting a feature 5796 or G30 I/ODrawer in an adjacent rack is the 8.0 M, 12X cable (#1834 or #1864).

Note: (3) The 8M 12X cable (#1834 or #1864) is intended for use whenconnecting between two modules that are located in adjacent racks. Thiscable may not be connected to the 12X Short Run adapter (#6446).

PCI card slots

The Power 750 has a maximum of five hot-plug slots.

Feature number 1878 must be selected.
One of feature numbers 1882, 1883, 1884, 1885, 1886, 1888, 1890, or1909 must be selected (no disks/SSD are required if feature number 0837is selected).
If connection of a feature 5886 EXP12S drawer is desired using theexternal SAS port on feature 8340, feature number 3668 or 3669 isrequired.
If tape device feature 5619 is installed in the half-high media bay,feature 3656 must be selected.
If a tape device feature 5746 or 5661 is installed in the half-highmedia bay, feature 3657 must be selected.

Split DASD backplane support requirements:

High-function DASD backplane (#8340, or follow-on).
SAS Cable, DASD Backplane (Split) to Rear Bulkhead (#3669). Feature3669 replaces feature 3668 in this configuration.
SAS Adapter (#5900, #5901, #5904, #5912, or follow-on)
External SAS cable.
SAS Cable feature 3669 is not available with feature 2145 ( IBM i).

Solid State Drive (SSDs)(#1890, #1909, #3586, #3587) supportrestrictions:

SFF features 1890 and 1909 are supported in the Power 750 CEC.
3.5-inch features 3586 and 3587 are not supported in the Power 750CEC.
SSDs and disk drives (HDDs) are not allowed to mirror each other.
SSDs are not supported by features 5900, 5901, 5902, and 5912.
A maximum of eight per feature 5886 drawer is allowed. No mixing ofSSDs and HDDs is allowed in a feature 5886. A maximum of one feature5886 EXP12S drawer containing SSDs attached to a single controller orpair of controllers is allowed. A feature 5886 containing SSD drivescannot be connected to other feature 5886s. A feature 5886 containingSSD drives cannot be attached to the CEC external SAS port on the Power750.
In a Power 750 with a split backplane, SSDs and HDDs may be placed ineither 'split' but no mixing of SSDs and HDDs within a split is allowed.IBM i does not support split DASD mode.
In a Power 750 without a split backplane, SSDs and HDDs may be mixedin any combination. However, they cannot be in the same RAID array.

DASD/Data Protection -- if IBM i (#2145) is selected, one of thefollowing is required:

6-core 3.3 GHz POWER7 processor card (#8335)
8-core 3.0 GHz POWER7 processor card (#8334)
8-core 3.3 GHz POWER7 processor card (#8332)
8-core 3.55 GHz POWER7 processor card (#8336)
4-core 3.7 GHz POWER7 processor card (#EPA3)
6-core 3.7 GHz POWER7 processor card (#EPA2)
8-core 3.2 GHz POWER7 processor card (#EPA4)
8-core 3.6 GHz POWER7 processor card (#EPA1)
Note: Beginning July 12, 2011 processor features#8332, #8334, #8335, and #8336 on the Power 750Express are only available on MES orders.

Choose four, six or eight processor activations from:

8 GB (2 x 4 GB) Memory DIMMs, 1066 MHz, 2 Gb (#4526/EM08)
16 GB (2 x 8 GB) Memory DIMMs, 1066 MHz, 2 Gb (#4527/EM16)
32 GB (2 x 16 GB) Memory DIMMs, 1066 MHz, 2 Gb (#4528/EM32)

Note: The 8 GB memory feature (#4526) is planned to be available on March16, 2010.

DASD/Media Backplane with external SAS port, 8 x 2.5-inch DASD(#8340)

Choose Ethernet daughter card from:

73.4 GB SAS 2.5-inch 15,000 RPM (#1883) (AIX/Linux/VIOS)
146.8 GB SAS 2.5-inch 10,000 RPM (#1882) (AIX/Linux/VIOS)
300 GB SAS 2.5-inch 10,000 RPM (#1885) (AIX/Linux)
69.7 GB SAS 2.5-inch 15,000 RPM (#1884) (IBM i)
139.5 GB SAS 2.5-inch 15,000 RPM (#1888) (IBM i)
69 GB SAS 2.5-inch Solid State Drive (#1890) (AIX/Linux/VIOS)
69 GB SAS 2.5-inch Solid State Drive (#1909) (IBM i)

Notes:

When feature 2145, IBM i operating system, is selected, a minimum oftwo DASD are required.
No internal DASD is required if feature 0837 (Boot from SAN) isselected. In this case, a Fibre Channel or Fibre Channel over Ethernetadapter must also be ordered.

Cable for rack-mount drawer with 2.5-inch DASD Backplane (#1878)

SATA DVD-RAM (#5762)

2 x 1725 watt AC power supply, Hot-swap (2 x #7740)

Choose Primary Operating System Indicator from:

RAID 0 (minimum two drives) provides striping without parity forperformance, but does not offer any fault tolerance. In data striping,data is broken down into several smaller, equally sized pieces. Eachpiece is then written to or read from multiple drives. This processincreases I/O bandwidth by simultaneously accessing multiple data paths.Because RAID-0 does not offer any redundancy, a single drive failure canresult in the loss of all data in a striped set. This means that all ofthe data on all the drives could be lost if even a single drive fails.

Note that RAID 0 drives can be mirrored by software to provideprotection.

RAID 5 (minimum three drives) uses block-level data striping withdistributed parity. RAID 5 stripes both data and parity informationacross three or more drives. Fault tolerance is maintained by ensuringthat the parity information for any given block of data is placed on adrive separate from those used to store the data itself. RAID 5 requiresN+1 drives to accommodate this parity data, thus the available storagecapacity for each array is reduced by one drive to provide protection.

RAID 6 (minimum four drives) uses block-level data striping with dualdistributed parity, the same as RAID 5 except RAID 6 uses a second levelof independently calculated and distributed parity information foradditional fault tolerance. This extra fault tolerance provides datasecurity in the event two drives fail before a drive can be replaced.RAID 6 requires N+2 drives to accommodate the additional parity data.

RAID 10 is RAID 0 plus redundancy. In this type of implementation, anarray with an even number of drives is created with mirrored pairs ofdrives within the array. A RAID 0 stripe set of data is created acrossthe mirrored pairs for performance and for redundancy.

If a protected drive fails, the failing drive can be removed from itshot-plug bay and the drive replaced while the server and partitioncontinue to run. The contents can then be re-created while the systemcontinues to run. Note that until the drive is both replaced and itscontents re-created, the protection provided using just mirroring or RAID10 is absent for that drive's now unmirrored paired drive. Similarly,the entire RAID 5 array is unprotected until the failed drive is replacedand re-created. RAID 6 and hot spare were designed to provide additionalprotection.

Software requirements

If installing the AIX operating system (one of these):

AIX Version 6.1 with the 6100-04 Technology Level and Service Pack 2,or later
AIX Version 6.1 with the 6100-03 Technology Level and Service Pack 5,or later (planned availability: June 25, 2010)
AIX Version 6.1 with the 6100-02 Technology Level and Service Pack 8,or later (planned availability: June 25, 2010)
AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 2,or later (planned availability: March 16, 2010)
AIX Version 5.3 with the 5300-10 Technology Level and Service Pack 4,or later (planned availability: May 28, 2010)
AIX Version 5.3 with the 5300-09 Technology Level and Service Pack 7,or later (planned availability: May 28, 2010)

If installing the IBM i operating system:

IBM i 6.1 with i 6.1.1 machine code, or later (planned availability:March 16, 2010)

If installing the Linux operating system (one of these):

Red Hat Enterprise Linux 5.5 or later
SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
Users should also update their systems with the latest Linux for Powerservice and productivity tools available at:
VIOS 2.1.2.11 with Fix Pack 22.1 and Service Pack 1, or later

Java 1.4.2 on POWER7

There are unique considerations when running Java 1.4.2 on POWER7.For best exploitation of the outstanding performance capabilities andmost recent improvements of POWER7, IBM recommends upgrading Java-basedapplications to Java 6 or Java 5 whenever possible.

For more information, visit:

Publications

IBM Power Systems hardware documentation provides you with thefollowing topical information:

AIX documentation can be found at the IBM AIX Information Center:

Visit the IBM System Support Site, which contains the documentationfor the hardware:

The IBM Systems Information Center provides you with a singleinformation center where you can access product documentation for IBMsystems hardware, operating systems, and server software. Through aconsistent framework, you can efficiently find information andpersonalize your access. The IBM Systems Information Center:

Features

Features - No charge	Features - Chargeable	Feature availability matrix
Feature descriptions

Features - No charge

Languages
- (#0983) -US TAA Compliance Indicator
- (#7305) -SDI Software Pre-Install Indicator
- (#9461) -Month Indicator
- (#9462) -Day Indicator
- (#9463) -Hour Indicator
- (#9464) -Minute Indicator
- (#9465) -Qty Indicator
- (#9466) -Countable Member Indicator
Specify Codes
- (#0463) -SSD Placement Indicator (5802/5803)
- (#0464) -SSD Placement Indicator - 5886
- (#0465) -SSD Placement Indicator - 5887
- (#ERA5) -Rational Appliance Cobol Solution Tracking Code
- (#ERA6) -Rational Appliance C/C++ Solution Tracking code
- (#ESC0) -S&H - No Charge
- (#ESC7) -S&H
Miscellaneous
Power
- (#2319) -Factory Deconfiguration of 1-core
Rack Related
- (#5524) -RFID TAGS FOR SERVERS, BLADES, BLADECENTERS, RACKS, AND HMCS
Solid State Drive
- (#0205) -RISC-to-RISC Data Migration
- (#0456) -Customer Specified Placement
- (#0724) -#1996 Load Source Specify
- (#0870) -#1879 Load Source Specify
- (#0871) -#1947 Load Source Specify
- (#0872) -#1948 Load Source Specify
- (#0874) -#1956 Load Source Specify
- (#0875) -#1962 Load Source Specify
- (#0876) -#1794 Load Source Specify
  One and only one rack indicator features is required on
  all orders (#4650 to #4666).
- (#4650) -Rack Indicator-Not Factory Integrated
- (#4651) -Rack Indicator, Rack #1
- (#4652) -Rack Indicator, Rack #2
- (#4653) -Rack Indicator, Rack #3
- (#4654) -Rack Indicator, Rack #4
- (#4655) -Rack Indicator, Rack #5
- (#4656) -Rack Indicator, Rack #6
- (#4657) -Rack Indicator, Rack #7
- (#4658) -Rack Indicator, Rack #8
- (#4659) -Rack Indicator, Rack #9
- (#4660) -Rack Indicator, Rack #10
- (#4661) -Rack Indicator, Rack #11
- (#4662) -Rack Indicator, Rack #12
- (#4663) -Rack Indicator, Rack #13
- (#4664) -Rack Indicator, Rack #14
- (#4665) -Rack Indicator, Rack #15
- (#4666) -Rack Indicator, Rack #16
- (#5002) -Customer Solution Center - Rochester Mfg

Special Features - Plant and/or Field Installable

Adapters
- (#0462) -SSD Placement Indicator - CEC
- (#0719) -Load Source Not in CEC
Cable
- (#2118) -Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M
- (#2124) -Ultra 320 SCSI Cable 1 Meter
- (#2125) -Ultra 320 SCSI Cable 3 Meter
- (#2126) -Ultra 320 SCSI Cable 5 Meter
- (#2127) -Ultra 320 SCSI Cable 10 Meter
- (#2128) -Ultra 320 SCSI Cable 20 Meter
- (#2138) -0.55 Meter Ultra 320 SCSI Cable
- (#2456) -2M LC-SC 50 Micron Fiber Converter Cable
- (#2459) -2M LC-SC 62.5 Micron Fiber Converter Cable
- (#2861) -ARTIC960Hx 4-Port EIA-232 Cable
- (#2863) -ARTIC960Hx 4-Port X.21 Cable
- (#2864) -ARTIC960Hx 4-Port V.35 (DTE) Cable
- (#2934) -3M Asynchronous Terminal/Printer Cable EIA-232
- (#2936) -Asynchronous Cable EIA-232/V.24 3M
- (#2951) -Cable, V.24 / EIA-232
- (#2952) -Cable, V.35
- (#2953) -Cable, V.36 / EIA-499
- (#2954) -Cable, X.21
- (#3124) -Serial-to-Serial Port Cable for Drawer/Drawer-3.7M
- (#3125) -Serial-to-Serial Port Cable for Rack/Rack-8M
- (#3450) -SAS YO Cable 1.5m - HD 6Gb Adapter to Enclosure
- (#3451) -SAS YO Cable 3m - HD 6Gb Adapter to Enclosure
- (#3452) -SAS YO Cable 6m - HD 6Gb Adapter to Enclosure
- (#3453) -SAS YO Cable 10m - HD 6Gb Adapter to Enclosure
- (#3454) -SAS X Cable 3m - HD 6Gb 2-Adapter to Enclosure
- (#3455) -SAS X Cable 6m - HD 6Gb 2-Adapter to Enclosure
- (#3456) -SAS X Cable 10m - HD 6Gb 2-Adapter to Enclosure
- (#3457) -SAS YO Cable 15m - HD 3Gb Adapter to Enclosure
- (#3458) -SAS X Cable 15m - HD 3Gb 2-Adapter to Enclosure
- (#3652) -SAS Cable (EE) Drawer to Drawer 1M
- (#3653) -SAS Cable (EE) Drawer to Drawer 3M
- (#3654) -SAS Cable (EE) Drawer to Drawer 6M
- (#3656) -SAS SFF Cable
- (#3657) -Right Angle SAS Tape Drive Cable
- (#3661) -SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 3M:
- (#3662) -SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 6M:
- (#3663) -SAS Cable (X) Adapter to SAS Enclosure, Dual Controller/Dual Path 15M:
- (#3668) -SAS Cable, DASD Backplane to Rear Bulkhead
- (#3669) -SAS Cable, DASD Backplane (Split) to Rear Bulkhead)
- (#3679) -SAS Cable (AI)-Adapter to Internal drive 1M
- (#3681) -3M SAS CABLE, ADPTR TO ADPTR (AA)
- (#3682) -6M SAS CABLE, ADPTR TO ADPTR (AA)
- (#3684) -SAS Cable (AE) Adapter to Enclosure, single controller/single path 3M
- (#3685) -SAS Cable (AE) Adapter to Enclosure, single controller/single path 6M
- (#3686) -SAS Cable (YI) System to SAS Enclosure, SingleController/Dual Path 1.5M
- (#3687) -SAS Cable (YI) System to SAS Enclosure, SingleController/Dual Path 3M
- (#3688) -SAS Cable (AT) 0.6 Meter
- (#3689) -SAS AT Cable 0.6m - HD 6Gb Adapter to 12X Enclosure (AT)
- (#3691) -SAS Cable (YO) Adapter to SAS Enclosure, SingleController/Dual Path 1.5 M
- (#3692) -SAS Cable (YO) Adapter to SAS Enclosure, SingleController/Dual Path 3 M
- (#3693) -SAS Cable (YO) Adapter to SAS Enclosure, SingleController/Dual Path 6 M
- (#3694) -SAS Cable (YO) Adapter to SAS Enclosure, SingleController/Dual Path 15 M
- (#3925) -0.3M Serial Port Converter Cable, 9-Pin to 25-Pin
- (#3926) -Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M
- (#3927) -Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M
- (#3928) -Serial Port Null Modem Cable, 9-pin to 9-pin, 10M
- (#3930) -System Serial Port Converter Cable
- (#4242) -1.8 M (6-ft) Extender Cable for Displays (15-pin D-shell to15-pin D-shell)
- (#4256) -Extender Cable-USB KEYB1.8
- (#4276) -VGA to DVI Connection Converter
- (#5915) -SAS AA Cable 3m - HD 6Gb Adapter to Adapter
- (#5916) -SAS AA Cable 6m - HD 6Gb Adapter to Adapter
- (#5917) -SAS AA Cable 1.5m - HD 6Gb Adapter to Adapter
- (#5918) -SAS AA Cable 0.6m - HD 6Gb Adapter to Adapter
- (#6001) -Power Control Cable (SPCN) - 2 meter
- (#6006) -Power Control Cable (SPCN) - 3 meter
- (#6007) -Power Control Cable (SPCN) - 15 meter
- (#6008) -Power Control Cable (SPCN) - 6 meter
- (#6029) -Power Control Cable (SPCN) - 30 meter
- (#7204) -Quantity 150 of #2124
- (#7205) -Quantity 150 of #2125
- (#7206) -Quantity 150 of #2126
- (#7207) -Quantity 150 of #2127
- (#7208) -Quantity 150 of #2128
- (#7213) -Quantity 150 of #2138
- (#7801) -Ethernet Cable, 6M, Hardware Management Console to SystemUnit
- (#7802) -Ethernet Cable, 15m, Hardware Management Console to SystemUnit
- (#ECB0) -0.6m (2.0-ft), Blue CAT5 Ethernet Cable
- (#ECB2) -1.5m (4.9-ft), Blue CAT5 Ethernet Cable
- (#ECW0) -Optical Wrap Plug
- (#EQ02) -Quanity 150 of #3452 SAS YO Cable 6m - HD 6Gb Adapter toEnclosure
- (#EQ03) -Quantity 150 of #3453 SAS YO Cable 10m - HD 6Gb Adapterto Enclosure
Disk
- (#3587) -69GB 3.5' SAS Solid State Drive
- (#3646) -73GB 15K RPM SAS Disk Drive
- (#3647) -146GB 15K RPM SAS Disk Drive (AIX/Linux)
- (#3648) -300GB 15K RPM SAS Disk Drive (AIX/Linux)
- (#3649) -450GB 15K RPM SAS Disk Drive (AIX/Linux)
- (#3658) -428GB 15K RPM SAS Disk Drive (IBM i)
- (#3676) -69.7GB 15k rpm SAS Disk Drive
- (#3677) -139.5GB 15k rpm SAS Disk Drive (IBM i)
- (#3678) -283.7GB 15k rpm SAS Disk Drive (IBM i)
- (#4327) -70.56GB 15k rpm Disk Unit
- (#4328) -141.12GB 15k rpm Disk Unit
- (#4329) -282.25GB 15k rpm Disk Unit
- (#7509) -Quantity 150 of #4327
- (#7510) -Quantity 150 of #4328
- (#7511) -Quantity 150 of #4329
- (#7517) -Quantity 150 of #3676
- (#7518) -Quantity 150 of #3677
- (#7519) -Quantity 150 of #3678
- (#7535) -Quantity 150 of #3586
- (#7536) -Quantity 150 of #3587
- (#7538) -Quantity 150 of #3658
- (#7549) -Quantity 150 of #3647
- (#7550) -Quantity 150 of #1790
- (#7564) -Quantity 150 of #3648
- (#7565) -Quantity 150 of #3649
- (#ELS1) -#ES11 Load Source Specify (387GB SSD SFF-1)
- (#ELS9) -#ES1A Load Source Specify (387GB SSD SFF-2)
- (#EQ38) -Quantity 150 of #1738 (856GB SFF-2 disk)
- (#EQ52) -Quantity 150 of #1752 (900GB SFF-2 disk)
- (#EQD2) -Quantity 150 of #ESD2 (1.1TB 10k SFF-2)
- (#EQD3) -Quantity 150 of #ESD3 (1.2TB 10k SFF-2)
- (#ESD0) -1.1TB 10K RPM SAS SFF-1 Disk Drive (IBM i)
- (#ESD1) -1.2TB 10K RPM SAS SFF-1 Disk Drive (AIX/Linux)
- (#ESD2) -1.1TB 10K RPM SAS SFF-2 Disk Drive (IBMi)
- (#ESD3) -1.2TB 10K RPM SAS SFF-2 Disk Drive (AIX/Linux)
Display
- (#3639) -IBM ThinkVision L170p Flat Panel Monitor
- (#3640) -ThinkVision L171p Flat Panel Monitor
- (#3641) -IBM T115 Flat Panel Monitor
- (#3642) -ThinkVision L191p Flat Panel Monitor
- (#3643) -IBM T120 Flat Panel Monitor
- (#3644) -IBM T119 Flat Panel Monitor
- (#3645) -IBM T117 Flat Panel Monitor
Drive
- (#5951) -Full Width Keyboard -- USB, US English, #103P
- (#5952) -Full Width Keyboard -- USB, French, #189
- (#5953) -Full Width Keyboard -- USB, Italian, #142
- (#5954) -Full Width Keyboard -- USB, German/Austrian, #129
- (#5955) -Full Width Keyboard -- USB, UK English, #166P
- (#5956) -Full Width Keyboard -- USB, Spanish, #172
- (#5957) -Full Width Keyboard -- USB, Japanese, #194
- (#5958) -Full Width Keyboard -- USB, Brazilian Portuguese, #275
- (#5959) -Full Width Keyboard -- USB, Hungarian, #208
- (#5960) -Full Width Keyboard -- USB, Korean, #413
- (#5961) -Full Width Keyboard -- USB, Chinese, #467
- (#5962) -Full Width Keyboard -- USB, French Canadian, #445
- (#5964) -Full Width Keyboard -- USB, Belgian/UK, #120
- (#5965) -Full Width Keyboard -- USB, Swedish/Finnish, #153
- (#5966) -Full Width Keyboard -- USB, Danish, #159
- (#5967) -Full Width Keyboard -- USB, Bulgarian, #442
- (#5968) -Full Width Keyboard -- USB, Swiss/French/German, #150
- (#5969) -Full Width Keyboard -- USB, Norwegian,#155
- (#5970) -Full Width Keyboard -- USB, Dutch, #143
- (#5971) -Full Width Keyboard -- USB, Portuguese, #163
- (#5972) -Full Width Keyboard -- USB, Greek, #319
- (#5973) -Full Width Keyboard -- USB, Hebrew, #212
- (#5974) -Full Width Keyboard -- USB, Polish, #214
- (#5975) -Full Width Keyboard -- USB, Slovakian, #245
- (#5976) -Full Width Keyboard -- USB, Czech, #243
- (#5977) -Full Width Keyboard -- USB, Turkish, #179
- (#5978) -Full Width Keyboard -- USB, LA Spanish, #171
- (#5979) -Full Width Keyboard -- USB, Arabic, #253
- (#5980) -Full Width Keyboard -- USB, Thai, #191
- (#5981) -Full Width Keyboard -- USB, Russian, #443
- (#5982) -Full Width Keyboard -- USB, Slovenian, #234
- (#5983) -Full Width Keyboard -- USB, US English Euro, #103P
- (#EK51) -Full Width Keyboard -- USB, US English, #103P
- (#EK52) -Full Width Keyboard -- USB, French, #189
- (#EK53) -Full Width Keyboard -- USB, Italian, #142
- (#EK54) -Full Width Keyboard -- USB, German/Austrian, #129
- (#EK55) -Full Width Keyboard -- USB, UK English, #166P
- (#EK56) -Full Width Keyboard -- USB, Spanish, #172
- (#EK57) -Full Width Keyboard -- USB, Japanese, #194
- (#EK58) -Full Width Keyboard -- USB, Brazilian Portuguese, #275
- (#EK59) -Full Width Keyboard -- USB, Hungarian, #208
- (#EK60) -Full Width Keyboard -- USB, Korean, #413
- (#EK61) -Full Width Keyboard -- USB, Chinese, #467
- (#EK62) -Full Width Keyboard -- USB, French Canadian, #445
- (#EK64) -Full Width Keyboard -- USB, Belgian/UK, #120
- (#EK65) -Full Width Keyboard -- USB, Swedish/Finnish, #153
- (#EK66) -Full Width Keyboard -- USB, Danish, #159
- (#EK67) -Full Width Keyboard -- USB, Bulgarian, #442
- (#EK68) -Full Width Keyboard -- USB, Swiss/French/German, #150
- (#EK69) -Full Width Keyboard -- USB, Norwegian,#155
- (#EK70) -Full Width Keyboard -- USB, Dutch, #143
- (#EK71) -Full Width Keyboard -- USB, Portuguese, #163
- (#EK72) -Full Width Keyboard -- USB, Greek, #319
- (#EK73) -Full Width Keyboard -- USB, Hebrew, #212
- (#EK74) -Full Width Keyboard -- USB, Polish, #214
- (#EK75) -Full Width Keyboard -- USB, Slovakian, #245
- (#EK76) -Full Width Keyboard -- USB, Czech, #243
- (#EK77) -Full Width Keyboard -- USB, Turkish, #179
- (#EK78) -Full Width Keyboard -- USB, LA Spanish, #171
- (#EK79) -Full Width Keyboard -- USB, Arabic, #253
- (#EK80) -Full Width Keyboard -- USB, Thai, #191
- (#EK81) -Full Width Keyboard -- USB, Russian, #443
- (#EK82) -Full Width Keyboard -- USB, Slovenian, #234
- (#EK83) -Full Width Keyboard -- USB, US English Euro, #103P
Linecords
- (#9359) -specify mode-1 1(1)5901/5278 for EXP24S #5887
- (#9360) -Specify mode-1 1(2)5901/5278 for EXP24S #5887
- (#9361) -Specify mode-2 1(2)5901/5278 for EXP24S #5887
- (#9365) -Specify mode-4 1(4)5901/5278 for EXP24S #5887
- (#9366) -Specify mode-2 1(4)5901/5278 for EXP24S #5887
- (#9367) -Specify mode-1 1(2)5903/5805 for EXP24S #5887
- (#9368) -Specify mode-2 1(4)5903/5805 for EXP24S #5887
- (#9382) -Specify mode-1 1(1)5904/6/8 for EXP24S #5887
- (#9383) -Specify mode-1 1(2) 5904/6/8 for EXP24S #5887
- (#9384) -Specify mode-1 & CEC SAS port for EXP24 #5887
- (#9385) -Specify mode-1 1(2) 5913 for EXP24S #5887
- (#9386) -Specify mode-2 1(4) 5913 for EXP24S #5887
- (#EJS1) -Non-paired Indicator ESA3 PCIe SAS RAID Adapter
- (#EJS2) -Specify Mode-2 1(2)ESA3 for EXP24S (#5887/#EL1S)
- (#EJS3) -Specify Mode-1 1(2)ESA3 for EXP24S (#5887/#EL1S)
- (#EJS4) -Specify Mode-2 1(4)ESA3 for EXP24S (#5887/#EL1S)
- (#EJS5) -Specify Left Half 12X I/O Drawer to PCIe2 1.8GB RAID SASAdapter
- (#EJS6) -Specify Right Half 12X I/O Drawer to PCIe2 1.8GB RAID SASAdapter
Media Devices
- (#5689) -DAT160 Data Cartridge
- (#5747) -IBM LTO Ultrium 4 800 GB Data Cartridge
Memory
- (#0032) -Specify Code for External High Speed Modem
- (#1114) -Smart Analytics System routing indicator
- (#1140) -Custom Service Specify, Rochester Minn, USA
- (#2145) -Primary OS - IBM i
- (#2146) -Primary OS - AIX
- (#2147) -Primary OS - Linux
- (#4367) -Package 5X #2055 & 20X #1995 (AIX/Linux)
- (#4377) -Package 5X #2055 & 20X #1996 (IBM i)
- (#5001) -Custom Service Specify, Off-Site
- (#6586) -Modem Tray for 19-Inch Rack
- (#ECSM) -Custom Service Specify, Mexico
Pointing Device
- (#5160) -Power Dist Unit 1 Phase NEMA
- (#5161) -Power Dist Unit 1 Phase IEC
- (#5162) -Power Dist Unit 2 of 3 Phase
- (#5163) -Power Dist Unit - 3 Phase
- (#7109) -Intelligent PDU+, 1 EIA Unit, Universal UTG0247 Connector
- (#7188) -Power Distribution Unit
Processor
- (#0551) -19 inch, 1.8 meter high rack
- (#0553) -19 inch, 2.0 meter high rack
- (#0555) -19 inch, 1.3 meter high rack
- (#0599) -Rack Filler Panel Kit
- (#1108) -Juniper EXP4200 Ethernet Switch
- (#5786) -TotalStorage EXP24 Disk Dwr
- (#5787) -TotalStorage EXP24 Disk Twr
- (#5796) -PCI-DDR 12X Expansion Drawer
- (#5802) -12X I/O Drawer PCIe, SFF disk
- (#5877) -12X I/O Drawer PCIe, No Disk
- (#5886) -EXP 12S Expansion Drawer
- (#5887) -EXP24S SFF Gen2-bay Drawer
- (#6068) -Opt Front Door for 1.8m Rack
- (#6069) -Opt Front Door for 2.0m Rack
- (#6248) -1.8m Rack Acoustic Doors
- (#6249) -2.0m Rack Acoustic Doors
- (#6263) -1.8m Rack Trim Kit
- (#6272) -2.0m Rack Trim Kit
- (#6580) -Optional Rack Security Kit
- (#7118) -Environmental Monitoring Probe
- (#7307) -Dual I/O Unit Enclosure
- (#7314) -I/O Drawer Mounting Enclosure
- (#7780) -2.0m Rack Side Attach Kit
- (#7840) -Side-by-Side for 1.8m Racks
- (#7841) -Ruggedize Rack Kit
- (#EC01) -Rack Front Door (Black)
- (#EC02) -Rack Rear Door
- (#EC03) -Rack Side Cover
- (#EC04) -Rack Suite Attachment Kit
- (#EC15) -Rear Door Heat Exchanger for 2.0 Meter Slim Rack
- (#ER05) -42U Slim Rack
Services
- (#0893) -#ES0B Load Source Specify
- (#0894) -#ES0D Load Source Specify
- (#1775) -177GB SFF-1 SSD w/ eMLC (AIX/Linux)
- (#1787) -177GB SFF-1 SSD w/ eMLC (IBM i)
- (#1793) -177GB SFF-2 SSD w/ eMLC (AIX/Linux)
- (#1794) -177GB SFF-2 SSD w/ eMLC (IBM i)
- (#1887) -Quantity 150 of #1793
- (#1958) -Quantity 150 of #1794
- (#EH10) -387GB SFF-2 SSD converted for AIX/Linux
- (#EH11) -387GB SFF-2 SSD converted for AIX/Linux
- (#EH12) -387GB SFF-2 SSD converted for IBM i
- (#EH13) -387GB SFF-2 SSD converted for IBM i
- (#EH14) -GEN2-S Conversion Carrier for Feature ES0C 387GB SSD
- (#EH16) -GEN2-S Conversion Carrier for Feature ES0D 387GB SSD (IBMi)
- (#ELSF) -#ES0F Load Source Specify (775GB SSD SFF-1)
- (#ELSH) -#ES0H Load Source Specify (775GB SSD SFF-2)
- (#ELT9) -#ES79 Load Source Specify (387GB SFF-2 SSD 5xx for IBM i)
- (#ELTF) -#ES7F Load Source Specify (775GB SFF-2 SSD 5xx for IBM i)
- (#EQ0C) -Quantity of 150 #ES0C
- (#EQ0D) -Quantity of 150 #ES0D
- (#EQ0G) -Quantity 150 of #ES0G (775GB SSD SFF-2)
- (#EQ0H) -Quantity 150 of #ES0H (775GB SSD SFF-2)
- (#EQ19) -Quantity 150 of #ES19 (387GB SSD SFF-2)
- (#EQ1A) -Quantity 150 of #ES1A (387GB SSD SFF-2)
- (#EQ78) -Quantity 150 of #ES78 387GB SFF-2 SSD 5xx
- (#EQ79) -Quantity 150 of #ES79 387GB SFF-2 SSD 5xx
- (#EQ7E) -Quantity 150 of #ES7E 775GB SFF-2 SSD 5xx
- (#EQ7F) -Quantity 150 of #ES7F 775GB SFF-2 SSD 5xx
- (#ES0A) -387GB SFF-1 SSD for AIX/Linux with eMLC
- (#ES0B) -387GB SFF-1 SSD for IBM i with eMLC
- (#ES0C) -387GB SFF-2 SSD for AIX/Linux with eMLC
- (#ES0D) -387GB SFF-2 SSD for IBM i with eMLC
- (#ES0E) -775GB SFF-1 SSD for AIX/Linux
- (#ES0F) -775GB SFF-1 SSD for IBM i
- (#ES0G) -775GB SFF-2 SSD for AIX/Linux
- (#ES0H) -775GB SFF-2 SSD for IBM i
- (#ES10) -387GB SFF-1 SSD for AIX/Linux
- (#ES11) -387GB SFF-1 SSD for IBM i
- (#ES19) -387GB SFF-2 SSD for AIX/Linux
- (#ES1A) -387GB SFF-2 SSD for IBM i
- (#ES78) -387GB SFF-2 SSD 5xx eMLC4 for AIX/Linux
- (#ES79) -387GB SFF-2 SSD 5xx eMLC4 for IBM i
- (#ES7E) -775GB SFF-2 SSD 5xx eMLC4 for AIX/Linux
- (#ES7F) -775GB SFF-2 SSD 5xx eMLC4 for IBM i
Specify Codes
- (#0709) -Flexible Thermal Settings for NEBS Applications
- (#7793) -PowerVM Express
- (#7794) -PowerVM Standard
- (#7795) -PowerVM Enterprise
- (#ELPM) -Trial PowerVM Live Partition Mobility

Feature availability matrix

The following feature availability matrix for MT 8233 uses the letter'A' to indicate features that are available and orderable on thespecified models. 'S' indicates a feature that is supported on the newmodel during a model conversion; these features will work on the newmodel, but additional quantities of these features cannot be ordered onthe new model; they can only be removed. 'N' indicates that the featureis not supported on the new model and must be removed during the modelconversion. As additional features are announced, supported, orwithdrawn, this list will be updated. Please check with your MarketingRepresentative for additional information.

Feature descriptions

The following is a list of all feature codes in numeric order for theIBM Power Systems 8233 machine type.

Attributes, as defined in the following feature descriptions, statethe interaction of requirements among features.

Minimums and maximums are the absolute limits for a single featurewithout regard to interaction with other features. The maximum validquantity for MES orders may be different than for initial orders. Themaximums listed below refer to the largest quantity of these twopossibilities.

The order type defines if a feature is orderable only on initialorders, only on MES orders, on both initial and MES orders, or if afeature is supported on a model due to a model conversion. Supportedfeatures cannot be ordered on the converted model, only left on orremoved from the converted model.

(#0010) - One CSC Billing Unit

One Billing Unit used by the Customer Solution Center.

Minimum required: 0
Maximum allowed: 9999 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: Does not apply

(#0011) - Ten CSC Billing Units

Ten Billing Units used by the Customer Solutions Center.

Minimum required: 0
Maximum allowed: 9999 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: Does not apply

(#0032) - Specify Code for External High Speed Modem

(No Longer Available as of July 29, 2011)

This specify feature is required if an external high speed modem is tobe shipped with the system. The exact machine type-model of the modemshipped will vary based on what is currently stocked in manufacturing.

This feature code cannot be ordered in the following countries:Albania, Angola, Armenia, Bahamas, Belize, Brunei, Ghana, Kenya,Macedonia, Moldavia, Nigeria, Rep Dominica, Santa Lucia, Serbia, Trinidad& Tobago, Zambia.

Minimum required: 0
Maximum allowed: 384 (Initial order maximum: 250)
OS level required:
- Attributes provided: Device-level mirrored protection
- Attributes required: Minimum of two (2) disk units
- For 8233-E8B: (#0040)
  - Refer to Software Requirements for IBM i support
  - No AIX support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#0041) - Device Parity Protection-All, Specify Code

This code indicates the level of disk protection desired and helpsensure that adequate hardware is in the final configuration.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:
- Attributes provided: Bus-level mirrored protection
- Attributes required: Minimum of 2 (two) disk units
- For 8233-E8B: (#0043)
  - Refer to Software Requirements for IBM i support
  - No AIX support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#0047) - Device Parity RAID-6 All, Specify Code

This code indicates the level of disk protection desired and helpsensure that adequate hardware is in the final configuration.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:
- Attributes provided: None
- Attributes required: Customers intend to create a partition on thesystem that will run the AIX operating system.
- For 8233-E8B: (#0265)
  - Refer to Software Requirements for AIX support
  - No IBM i support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#0266) - Linux Partition Specify

This feature indicates customers intend to create a partition on thesystem that will use the Linux operating system. This feature should beincluded once for each intended Linux partition. This feature is anindicator and does not deliver parts, software, or services.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 320)
OS level required:
- Attributes provided: None
- Attributes required: Customers intend to create a partition on thesystem that will run the IBM i operating system.
- For 8233-E8B: (#0267)
  - Refer to Software Requirements for IBM i support
  - No AIX support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#0275) - CSC Specify

(No Longer Available as of October 12, 2010)

Having #0275 on the order, will cause the order content to beinternally routed to the CSC build area in building 114 (Rochester).

Minimum required: 0
Maximum allowed: 1PO (Initial order maximum: 1)
OS level required: N/A
Initial Order/MES/Both/Supported: Both
CSU: N/A
Return parts MES: No

(#0296) - Specify Custom Data Protection

#0296 specifies that a system has multiple IBM i partitions and thatdata protection schemes should be considered separately for eachpartition instead of only for an overall system level. Each partition'sdata protection scheme can be different or the same.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:
(#0349) - V.24/EIA232 15.2m (50-Ft) PCI Cable
(No Longer Available as of December 15, 2002).
This feature provides a 50-foot WAN PCI cable that supports a V.24 ora EIA232 electrical connection interface.
- Minimum required: 0
- Maximum allowed: 320 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply

(#0353) - V.35 6.1m (20-Ft) PCI Cable

This feature provides a 20-foot WAN PCI cable that supports a V.35electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#0354) - V.35 15.2m (50-Ft) PCI Cable

(No Longer Available as of December 15, 2002).

This feature provides a 50-foot WAN PCI cable that supports a V.35electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#0356) - V.36 6.1m (20-Ft) PCI Cable

(No Longer Available as of December 1, 2007)

This feature provides a 20-foot WAN PCI cable that supports a V.36electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#0359) - X.21 6.1m (20-Ft) PCI Cable

This feature provides a 20-foot WAN PCI cable that supports a X.21electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#0360) - X.21 15.2m (50-Ft) PCI Cable

(No Longer Available as of December 15, 2002).

This feature provides a 50-foot WAN PCI cable that supports a X.21electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#0365) - V.24/EIA232 (80-Ft) PCI Cable

(No Longer Available as of December 15, 2002).

This feature provides a 80-foot WAN PCI cable that supports a V.24electrical connection interface.

Minimum required: 0
Maximum allowed: 320 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#0444) - CBU Specify

(No Longer Available as of January 3, 2014)

This specify code indicates this system has been properly registeredas a Capacity BackUp system and has, through that registration beenauthorized to temporarily receive IBM i Operating System LicenseEntitlements and 5250 Processor Enablement entitlements, from a primarysystem under the conditions specified at the time the system wasregistered. This feature is an indicator only, authorization to use thissystem as a backup is obtained only by registering the system with IBM onthe CBU Web site at:

Attributes provided: Indicates the system has been registered foruse as a CBU system for IBM i License entitlement purposes.

Attributes required: # 2145 Primary OS - IBM i or #0267 IBM iOperating System Partition Specify

For 8233-E8B: (#0444)

No AIX support
Refer to Software Requirements for IBM i support
No Linux support

Initial Order/MES/Both/Supported: Initial

CSU: N/A

Return parts MES: No

(#0456) - Customer Specified Placement

(No Longer Available as of January 3, 2014)

Requests that IBM deliver the system to the customer according to theslot in drawer hardware placement defined by the account team.
Eliminates the need to have these parts relocated in the customersenvironment as may happen if the order is placed without this featurecode.
Client placement specifications are collected using the SystemPlanning Tool (SPT) and processed through the marketing configurator.(Use of the SPT is not required).
Requires account team to submit the output of the marketingconfigurator into IBM manufacturing via the CSP Web site:
Attributes provided: I/O component placement
Attributes required: Marketing Configurator output submitted to theCSP Web site. (US Business Partners and Distributors can bypass thisstep.)
For 8233-E8B: (#0456)
- Attributes provided: None
- Attributes required: None
- For 8233-E8B: (#0462)
  - Attributes provided: None
  - Attributes required: None
  - For 8233-E8B: (#0463)
    Attributes provided: None
    Attributes required: None
    For 8233-E8B: (#0464)
    Attributes provided: None
    Attributes required: None
    For 8233-E8B: (#0465)
    #6068 - Optional Front Door for 1.8m Rack
    #6246 - 1.8m Rack Trim Kit
    #6248 - 1.8m Rack Acoustic Doors
    The following features are also orderable on the #0551:
    #7188 - Power Distribution Unit (12, C-13 sockets)
    #7109 - Power Distribution Unit (12, C-13 sockets)
    Attributes provided: 19 inch, 1.8M, 36 EIA Rack
    Attributes required: #6068 or #6246 or #6248.
    For 8233-E8B: (#0551)
    #6069 - Optional Front Door for 2.0m Rack
    #6247 - 2.0m Rack Trim Kit
    #6249 - 2.0m Rack Acoustic Doors
    The #0553 can support up to nine power distribution units (PDU), fourmounted vertically and five mounted horizontally. Each PDU mountedhorizontally takes up 1 EIA of rack space. The following PDUs aresupported:
    Minimum required: 0
    Maximum allowed: No Max (Initial order maximum: 0)
    OS level required: None
    Initial Order/MES/Both/Supported: MES
    CSU: Yes
    Return parts MES: No
    Note: This feature is not orderable.
    (#0555) - 19 inch, 1.3 meter high rack
    Provides a 19-inch, 1.3 meter (49-inch) high rack with 25 EIA units oftotal space for installing rack-mounted CECs and/or expansion units. The#0555 includes lockable front and rear doors. Filler panels andperforated doors are included to help provide proper airflow and cooling.
    PDU and power cord features are available for ordering with the rack.This rack does not feature side pockets for PDU mounting. All PDUs mustmount horizontally in EIA space.
    Minimum required: 0
    Maximum allowed: No Max (Initial order maximum: 0)
    OS level required: None
    Initial Order/MES/Both/Supported: Supported
    CSU: Yes
    Return parts MES: Does not apply
    (#0566) - IBM i 6.1 with 6.1.1 Machine Code Specify Code
    This feature is used to indicate the correct level of code when IBM iis specified.
    Minimum required: 0
    Maximum allowed: 1PO (Initial order maximum: 1)
    OS level required:
    Attributes provided: IBM i 7.1 indicator
    Attributes required: IBM i operating system
    For 8233-E8B: (#0567)
    AIX - not supported
    IBM i 7.1.0 or later
    Linux - not supported
    Initial Order/MES/Both/Supported: Both
    CSU: Yes
    Return parts MES: No
    (#0599) - Rack Filler Panel Kit
    Provides rack filler panels for IBM 19-inch racks. The #0599 providesthree 1-EIA -unit filler panels and one 3-EIA-unit filler panel. Theseare snap-on panels.
    Minimum required: 0
    Maximum allowed: No Max (Initial order maximum: 250)
    OS level required: None
    Initial Order/MES/Both/Supported: Both
    CSU: Yes
    Return parts MES: No
    (#0709) - Flexible Thermal Settings for NEBS Applications
    Ordering this feature will deliver a system that will enablecustomers to reset the thermal tolerances of the system to the higherlimits specified by NEBS Level 3 (Network Equipment Building System)compliant specifications. This feature is also available for systemscurrently installed via an MES order.
    Minimum required: 0
    Maximum allowed: 1 (Initial order maximum: 1)
    OS level required: None
    Initial Order/MES/Both/Supported: Both
    CSU: Yes
    Return parts MES: No
  (#0710) - Balanced Warehouse Solution Indicator
  (No Longer Available as of January 3, 2014)
  This feature specifies that the DS4000 EXP810 ordered will be acomponent of the Balanced Warehouse Solution. This feature willautomatically be selected by the configurator when a Balanced Warehousesolution is configured. The solution will be integrated at the CustomerSolution Center.
  - Minimum required: 0
  - Maximum allowed: 1 (Initial order maximum: 1)
  - OS level required: None
  - Initial Order/MES/Both/Supported: Initial
  - CSU: N/A
  - Return parts MES: Does not apply
(#0711) - IBM mCommerce Application Solution Indicator
(No Longer Available as of December 31, 2012)
This feature specifies a 8233-E8B server, 7042-CR6 (HMC), 7014-T42(rack), and 7318-TF3 (console) configuration for the IBM mCommerceApplication Solution. The solution will be integrated at the CustomerSolution Center.
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: Yes
- Return parts MES: Does not apply
(#0712) Power Cloud Solution Integrated Solution Indicator for Order Routing
(No Longer Available as of January 3, 2014)
A manufacturing routing code used to route orders to the CustomSolution Center for assembly
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Attributes provided: System unit(s) are shipped with no disk unitsplaced inside.
  - Attributes required: Alternate load source specified
  - For 8233-E8B: (#0719)
    - Attributes provided: Load source specified
    - Attributes required: #1787
    - For 8233-E8B: (#0722)
      Attributes provided: None
      Attributes required: #1996
      For 8233-E8B: (#0724)
      Attributes provided: External load source placement specify
      Attributes required: DASD Slot 1 open in #5786 Disk Enclosure
      For 8233-E8B: (#0725)
      Attributes provided: External load source placement capability
      Attributes required: Available SAS drive bay in #5802/#5803 ora SSD (#2055)in #5802/#5877 I/O expansion unit.
      For 8233-E8B: (#0726)
      Attributes provided: External load source placement specify
      Attributes required: DASD Slot 1 open in drawer
      For 8233-E8B: (#0727)
      Attributes provided: External load source placement specify
      Attributes required: DASD Slot 1 open in drawer
      For 8233-E8B: (#0728)
      Attributes provided: None
      For 8233-E8B: (#0835)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Supported
      CSU: Yes
      Return parts MES: Does not apply
      (#0836) - #4328 Load Source Specify
      This specify code indicates that a #4328 Disk Unit is being used asthe Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: SAN load source placement specify
      Attributes required: Fibre Channel adapter or Fibre Channel overEthernet Adapter
      For 8233-E8B: (#0837)
      Attributes provided: None
      Attributes required: feature #3676
      For 8233-E8B: (#0838)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Supported
      CSU: Yes
      Return parts MES: Does not apply
      (#0839) - #3677 Load Source Specify
      Indicates that a #3677 Disk Unit is being used as the Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: feature #3678
      For 8233-E8B: (#0840)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0841) - #4329 Load Source Specify
      Indicates that a #4329 Disk Unit is being used as the Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 0)
      OS level required:
      Attributes provided: None
      Attributes required: feature #3658
      For 8233-E8B: (#0844)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0851) - #1884 Load Source Specify
      (No Longer Available as of April 29, 2011)
      This specify code indicates that a #1884 Disk Unit is being used asthe Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: #1888
      For 8233-E8B: (#0853)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0854) - #1909 Load Source Specify
      (No Longer Available as of July 29, 2011)
      This specify code indicates that a #1909 Disk Unit is being used asthe Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: Feature #3587
      For 8233-E8B: (#0855)
      Refer to Software Requirements for IBM i support
      No AIX support
      No Linux support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0856) - #1911 Load Source Specify
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes required: #1916
      For 8233-E8B: (#0857)
      Attributes provided: None
      Attributes required: Feature #1879
      For 8233-E8B: (#0870)
      AIX - not supported
      IBM i 6.1 with machine code 6.1.1 or later
      IBM i 7.1 or later.
      Linux - not supported
      Initial Order/MES/Both/Supported: Initial
      CSU: Yes
      Return parts MES: No
      (#0871) - #1947 Load Source Specify
      This specify code indicates that a #1947 Disk Unit is being used asthe Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required: N/A
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: Does not apply
      (#0872) - #1948 Load Source Specify
      (No Longer Available as of January 3, 2014)
      This specify code indicates that a #1948 Disk Unit is being used asthe Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: Feature #1956
      For 8233-E8B: (#0874)
      Attributes provided: None
      Attributes required: Feature #1962
      For 8233-E8B: (#0875)
      Attributes provided: None
      Attributes required: Feature #1794
      For 8233-E8B: (#0876)
      Attributes provided: None
      Attributes required: Feature #1737
      For 8233-E8B: (#0879)
      Attributes provided: None
      Attributes required: Feature #1738
      For 8233-E8B: (#0880)
      Attributes provided: Feature ES0B
      Attributes required: None
      For 8233-E8B: (#0893)
      AIX - not supported
      Linux - not supported
      IBM i 7.1, or later
      IBM i 6.1 with 6.1.1 machine code, or later
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0894) - #ES0D Load Source Specify
      This specify code indicates that a #ES0D Solid State Drive is beingused as the Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: ESD0
      For 8233-E8B: (#0907)
      IBM i 6.1 with machine code 6.1.1, or later
      IBM i IBM i 7.1, or later
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#0911) - #ESD2 Load Souce Specify (1.1TB 10k SFF-2)
      Indicates that a #ESD2 (1.1 TB 10k rpm SFF-2 disk drive) is beingused as the Load Source.
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      Attributes provided: None
      Attributes required: None
      For 8233-E8B: (#0983)
      For 8233-E8B: (#1025)
      Refer to Software Requirements for IBM i support
      No AIX support
      Refer to Software Requirements for Linux support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1103) - USB Internal Docking Station for Removable Disk Drive
      (No Longer Available as of December 28, 2012)
      USB Internal Docking Station accommodates a removable RDX diskcartridge. The disks are in a protective rugged enclosure that plug intothe docking station. Docking station holds one removable rugged diskdrive/cartridge at a time. The rugged removable disk cartridge anddocking station backs up similar to tape drive. This can be an excellentalternative to DAT72, DAT160, 8mm, and VXA-2 and VXA-320 tapes.
      Highlights
      Minimum required: 0
      Maximum allowed: 1 (Initial order maximum: 1)
      OS level required:
      USB 2.0
      RDX docking station
      Suitable for backup and restore as an alternative to using tapedrives
      Attributes provided: USB External Docking Station, 3M USB cable, and1.8M power cord. Universal Adapter 100-240 VAC, 50-60Hz input providing15W DC output to the docking station.
      Attributes required: One USB port and at least one RDX diskcartridge such as #1106, #1107 or #EU01.
      For 8233-E8B: (#1104)
      Refer to Software Requirements for AIX support
      Refer to Software Requirements for Linux support
      No IBM i support
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      Note: VIOS - Not Supported
      (#1106) - USB 160 GB Removable Disk Drive
      (No Longer Available as of August 31, 2012)
      Provides an RDX disk drive in a rugged cartridge to be used in a #1103or #1104 docking station. 160 GB is uncompressed. With typical 2Xcompression, capacity would be 320 GB. Compression/decompression isprovided by the operating system, not the drive itself. Feature 1106 isnot entitled under the IBM Maintenance Agreement, if one is purchased.
      Minimum required: 0
      Maximum allowed: No Max (Initial order maximum: 250)
      OS level required:
      Attributes provided: 500 GB RDX rugged disk/cartridge
      Attributes required: One #1103 or #1104
      For 8233-E8B: (#1107)
      See RDX Docking Station
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1108) - Juniper EXP4200 Ethernet Switch
      (No Longer Available as of October 14, 2011)
      The Juniper EX4200 Ethernet Switch 48T with Virtual Chassis technologycombines the high availability and carrier-class reliability of modularsystems with the economics and flexibility of stackable platforms,delivering a high-performance, scalable solution for data centerenvironments.
      Reference Juniper web site http://www.juniper.net -- EX4200 EthernetSwitch 48T for additional information.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1109) - IBM Ethernet Switch J48E
      (No Longer Available as of January 3, 2014)
      The IBM Ethernet Switch J48E (4273-E48) with Virtual Chassistechnology combines the high availability and carrier-class reliabilityof modular systems with the economics and flexibility of stackableplatforms, delivering a high-performance, scalable solution for datacenter environments.
      Reference 4273-E48 sales manual for additional details.
      Minimum required: 0
      Maximum allowed: 10 (Initial order maximum: 10)
      OS level required: AIX Version 6.1 with the 6100-06 TechnologyLevel, or later.
      Initial Order/MES/Both/Supported: Initial
      CSU: Yes
      Return parts MES: No
      (#1111) - CAT5E Ethernet Cable, 3M BLUE
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1112) - CAT5E Ethernet Cable, 10M BLUE
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1113) - CAT5E Ethernet Cable, 25M BLUE
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1114) - Smart Analytics System routing indicator
      (No Longer Available as of January 24, 2017)
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1115) - CAT5E Ethernet Cable, 3M GREEN
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1116) - CAT5E Ethernet Cable, 10M GREEN
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1117) - CAT5E Ethernet Cable, 25M GREEN
      (No Longer Available as of August 31, 2017)
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1118) - CAT5E Ethernet Cable, 3M YELLOW
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1119) - CAT5E Ethernet Cable, 10M YELLOW
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
      (#1121) - CAT5E Ethernet Cable, 25M YELLOW
      (No longer available as of April 19, 2019)
      This feature code is used for the Smart Analytics offering andrequires feature codes #1114 or #0710. #0712 is also allowed as aManufacturing Routing Indicator.
      Minimum required: 0
      Maximum allowed: 999 (Initial order maximum: 999)
      OS level required: None
      Initial Order/MES/Both/Supported: Both
      CSU: Yes
      Return parts MES: No
    (#1140) - Custom Service Specify, Rochester Minn, USA
    Having #1140 on the order, will cause the order to be routed to Rochesterand the machine to be internally routed to the CSC build area in building114 (Rochester).
    - Minimum required: 0
    - Maximum allowed: 9999 (Initial order maximum: 1)
    - OS level required: None
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#1406) - 200V 16A 4.3m (14-Ft) TL Line Cord
  (No Longer Available as of December 1, 2007)
  - Minimum required: 0
  - Maximum allowed: No Max (Initial order maximum: 0)
  - OS level required: None
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
(#1413) - 125V 4.3m (14-Ft) Line Cord
(No Longer Available as of April 15, 2005)
- Minimum required: 0
- Maximum allowed: No Max (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply

(#1414) - 200V 1.8m (6-Ft) Locking Line Cord

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1415) - 200V 1.8m (6-Ft) Watertight Line Cord

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1416) - 200V 4.3m (14-Ft) Locking Line Cord

(No Longer Available as of January 15, 2003)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1417) - 200V 4.3m (14-Ft) Watertight Line Cord

(No Longer Available as of January 15, 2003)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1418) - 4.3m 200V/16A Power Cord S. Africa

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1419) - 4.3m 200V/16A Power Cord Israel

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1420) - 4.3m 200V/16A Power Cord EU/Asia

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1421) - 4.3m 200V/16A Power Cord CH/DK

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1424) - 200V 1.8m (6-Ft) Locking Line Cord

(No Longer Available as of December 15, 2002).

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1425) - 200V 1.8m (6-Ft) Watertight Line Cord

(No Longer Available as of December 15, 2002).

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1426) - 200V 4.3m (14-Ft) Locking Line Cord

(No Longer Available as of January 15, 2005)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1427) - 200V 4.3m (14-Ft) Watertight Line Cord

(No Longer Available as of January 15, 2005)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1439) - 4.3m 200V/10A Power Cord EU/Asia

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1440) - 4.3m 200V/10A Power Cord Denmark

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1441) - 4.3m 200V/10A Power Cord S. Africa

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1442) - 4.3m 200V/10A Power Cord Swiss

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1443) - 4.3m 200V/10A Power Cord UK

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1445) - 4.3m 200V/10A Power Cord Israel

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1449) - 4.3m 200V/32A Power Cord EU 1-PH

(No Longer Available as of January 15, 2005)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1450) - 4.3m 200V/16A Power Cord EU 2-PH

(No Longer Available as of October 15, 2004)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1451) - 200V (6-Ft) 1.8m Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1452) - 200V (14-Ft) 4.3m Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1453) - 200V (6-Ft) 1.8m Locking Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1454) - 200V 12A (14-Ft) 4.3m TL Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1455) - 200V (6-Ft) 1.8m Watertight Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1456) - 200V (14-Ft) 4.3m Watertight Line Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1457) - 200V (6-Ft) 1.8m Upper Line Cord

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1458) - 200V (6-Ft) 1.8m Upper Locking Cord

(No Longer Available as of December 1, 2007)

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1459) - 200V (6-Ft) 1.8m Upper Locking Cord

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1476) - 4.3m 200V/12A Pwr Cd UK

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1477) - 4.3m 200V/16A Pwr Cd

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#1737) - 856GB 10k RPM SAS SFF Disk Drive (IBM i)

(No Longer Available as of January 20, 2017)

856GB SFF 10k rpm SAS drive in Gen1 SFF carrier. Supported in SFFSAS bays such as provided in most POWER7 system units or the #5802/5803 I/O drawers. Disk is formatted for 528 byte sectors.

The drive can be reformatted to 512 byte sectors and then used byAIX/Linux/VIOS.

Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
- Attributes provided: 856GB of Disk Storage mounted in a Gen2carrier
- Attributes required: one SFF SAS disk drive bay
- For 8233-E8B: (#1738)
  - Refer to the Software Requirements section to find the supportedO/S levels.
  - AIX - no supported
  - IBM i 7.1 or later
  - Linux - not supported
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#1751) - 900GB 10K RPM SAS SFF Disk Drive (AIX/Linux)

(No Longer Available as of January 20, 2017)

900GB SFF 10k rpm SAS drive in gen-1 SFF carrier. Supported in SFFSAS bays such as provided in most POWER7 system units or the#5802/5803 I/O drawers. Disk is formatted for 512 byte sectors.

The drive can be reformatted to 528 byte sectors and then used byIBM i/AIX/Linux/VIOS

Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: VIOS support requires VIOS 2.2.1.0, or later

(#1752) - 900GB 10k RPM SAS SFF-2 Disk Drive (AIX/Linux)

(No Longer Available as of January 20, 2017)

900GB SFF 10k rpm SAS drive in Gen-2 carrier. Supported in SFF SASbays such as provided in #5887 EXP24S Gen2 I/O drawer. Disk isformatted for 512 byte sectors.

The drive can be reformatted to 528 byte sectors and then used byIBM i/AIX/Linux/VIOS

Limitation: can not be used in #5802/5803 I/O drawers or in CECSFF bays due to physical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 504 (Initial order maximum: 250)
OS level required:
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: VIOS support requires VIOS 2.2.1.0, or later.

(#1775) - 177GB SFF-1 SSD w/ eMLC (AIX/Linux)

(No Longer Available as of August 23, 2013)

The 177GB SFF SAS Solid State Drive (SSD) provides 177 GB of very highperformance storage, much faster than spinning disk drives with theirdelays due to positioning the disk arm and waiting for the spinning diskto rotate under the arm.

The drive is formatted to 528 byte sectors providing 177 GB and can beused by AIX, Linux (#1775) and IBM i (#1787). #1775 and #1787 areidentical drives, but have different feature codes to help the IBMconfiguration tools understand how the SSD is used. The drive issupported in SFF SAS bays in the #5802/#5803 I/O drawers or system unitSAS bays. CCIN is 58B3.

Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
- Attributes provided: 177GB SFF-1 SSD w/ eMLC (IBM i)
- Attributes required: One SFF-1 SAS bay
- For 8233-E8B: (#1787)
  - AIX - not supported
  - IBM i 6.1 with machine code 6.1.1, or later
  - IBM i 7.1 or later
  - SUSE - not supported
  - Red Hat Enterprise Linux - not supported
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#1790) - 600GB 10K RPM SAS SFF Disk Drive (AIX/Linux)

(No Longer Available as of August 31, 2017)

600GB SFF 10k rpm SAS drive in gen-1 SFF carrier. Supported in SFFSAS bays such as provided in most POWER7 system units or the #5802/5803I/O drawers. Disk is formatted for 512 byte sectors.

Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
- Attributes provided: 177 GB of formatted drive storage mounted in aSFF Gen2 carrier
- Attributes required: One Gen2 SFF SAS drive bay
- For 8233-E8B: (#1793)
  - AIX Version 7.1 with Service Pack 3, or later
  - AIX Version 6.1 with the 6100-06 Technology Level and Service Pack 5,or later
  - AIX Version 6.1 with the 6100-05 Technology Level and Service Pack 6,or later
  - AIX Version 6.1 with the 6100-04 Technology Level and Service Pack10, or later
  - AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 4,or later
  - AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 7,or later
  - IBM i - not supported (see VIOS)
  - SUSE Linux Enterprise 10 Service Pack 3, or later
  - SUSE Linux Enterprise 11 Service Pack 1, or later
  - Red Hat Enterprise Linux 5.6 for POWER, or later
  - Red Hat Enterprise Linux 6 for POWER, or later
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No
Note: VIOS support requires VIOS 2.2.0.12-FP24 SP02, or later

(#1794) - 177GB SFF-2 SSD w/ eMLC (IBM i)

(No Longer Available as of August 23, 2013)

The drive is formatted to 528 byte sectors providing 177 GB and can beused by AIX, Linux (#1793) and IBM i (#1794). #1793 and #1794 areidentical drives, but have different feature codes to help the IBMconfiguration tools understand how the SSD is used. The drive issupported in SFF-2 or gen2 SAS bays such as provided in the #5887 EXP24SI/O drawer. CCIN is 58B4.

Limitation: can not be used in Gen1 Bays such as the #5802/5803 12XPCIe I/O drawer due to physical difference in Gen1 and Gen2 carriers.

Minimum required: 0
Maximum allowed: 384 (Initial order maximum: 250)
OS level required:
- Attributes provided: see feature #1962
- Attributes required: see feature #1962
- For 8233-E8B: (#1817)
  - AIX - not supported
  - IBM i 6.1 with i 6.1.1 machine code, or later
  - Linux - not supported
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#1818) - Quantity 150 of #1964

(No Longer Available as of August 31, 2017)

This feature ships a quantity of 150 #1964 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.

Minimum required: 0
Maximum allowed: 3 (Initial order maximum: 3)
OS level required:
- Attributes provided: System (serial) port conversion for UPSattachment
- Attributes required: Integrated CEC system (serial) port.
- For 8233-E8B: (#1827)
  - Attributes provided: 12X channel to 4X channel conversion cable
  - Attributes required: 12X channel adapter
  - For 8233-E8B: (#1828)
    - Attributes provided: 0.6 Meter 12X cable
    - Attributes required: none
    - For 8233-E8B: (#1829)
      - Attributes provided: 1.5 Meter 12X cable
      - Attributes required: none
      - For 8233-E8B: (#1830)
        Attributes provided: 8.0 Meter 12X Cable
        Attributes required: none
        For 8233-E8B: (#1834)
        Attributes provided: 3.0 Meter 12x Cable
        Attributes required: none
        For 8233-E8B: (#1840)
        Attributes provided: 12X channel to 4X channel conversion cable
        Attributes required: 12X channel adapter
        For 8233-E8B: (#1841)
        Attributes provided: see feature #1956
        Attributes required: see feature #1956
        For 8233-E8B: (#1844)
        AIX - not supported
        IBM i 6.1 with i 6.1.1 machine code, or late
        Linux - not supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#1854) - 10 Meter 12X to 4X Enhanced Channel Conversion Cable
        (No longer available as of April 19, 2019)
        This cable is an enhanced 12X channel to 4X channel converter. Itsupports attaching a 4X Infiniband switch to a 12X channel adapter. Itis a 10 meter long copper cable. This cable has one 4X channel connectorand one 12X channel connector.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: No Max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#1861) - 0.6 Meter 12X DDR Cable
        (No longer available as of April 19, 2019)
        When used with a 24-inch rack mount I/O drawer, this 0.6 Meter DDRcable is used as a jumper between the two halves of the I/O Drawer whenboth halves are included in the same 12X loop.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: No Max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: Use with #5796, Do not use for looping #5802
        (#1862) - 1.5 Meter 12X DDR Cable
        (No longer available as of April 19, 2019)
        This 1.5 Meter DDR cable is used to attach a 12X channel I/O Drawer toa 12X channel adapter in the Host system or can be used between two I/Odrawers in a 12X channel loop.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: No Max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
      (#1864) - 8.0 Meter 12X DDR Cable
      (No longer available as of April 19, 2019)
      This 8 Meter DDR cable is used to attach a 12X channel I/O Drawer to a12X channel adapter in the Host system or can be used between two I/Odrawers in a 12X channel loop.
      - Minimum required: 0
      - Maximum allowed: No Max (Initial order maximum: No Max)
      - OS level required: None
      - Initial Order/MES/Both/Supported: Both
      - CSU: Yes
      - Return parts MES: No
    (#1865) - 3.0 Meter 12X DDR Cable
    (No longer available as of April 19, 2019)
    This 3 Meter DDR cable is used to attach a 12X channel I/O Drawer to a12X channel adapter in the Host system or can be used between two I/Odrawers in a 12X channel loop.
    Select the 12X DDR cable length from those offered that best meetsyour cabling needs and the cable length restrictions for yourapplication.
    - Minimum required: 0
    - Maximum allowed: No Max (Initial order maximum: No Max)
    - OS level required: None
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#1866) - Quantity 150 of #1917
  (No Longer Available as of July 8, 2016)
  This feature ships a quantity of 150 #1917 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
  - Minimum required: 0
  - Maximum allowed: 3 (Initial order maximum: 3)
  - OS level required:
    - Attributes provided: see feature #1947
    - Attributes required: see feature #1947
    - For 8233-E8B: (#1868)
      - AIX - not supported
      - IBM i 6.1 with Machine Code 6.1.1
      - IBM i 7.1 or later
      - Linux not - supported
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#1869) - Quantity 150 of #1925
  (No Longer Available as of July 8, 2016)
  This feature ships a quantity of 150 #1925 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
  - Minimum required: 0
  - Maximum allowed: 3 (Initial order maximum: 3)
  - OS level required:
    (#1879) - 283GB 15K RPM SAS SFF Disk Drive (IBM i)
    (No Longer Available as of August 31, 2017)
    283 GB SFF 15k RPM SAS disk drive mounted in a Gen-1 carrier andsupported in SFF SAS bay such as provided in the #5802/5803 I/O drawer orPOWER7 system unit. Disk is formatted for 528 sectors as shipped fromIBM Manufacturing. CCIN is 19A1.
    Limitations: physical difference in Gen1 and Gen2 carriers preventusage in SFF-2 bays such as used in the #5887 EXP24S I/O drawer.
    - Minimum required: 0
    - Maximum allowed: 80 (Initial order maximum: 80)
    - OS level required:
      - Attributes provided: 300GB of SFF (2.5-inch) SAS disk storagemounted in Gen-1 carrier.
      - Attributes required: one SFF-1 drive bay
      - For 8233-E8B: (#1880)
        AIX Version 7.1, with the 7100-01 Technology level or later
        AIX Version 7.1, or later
        AIX Version 6.1, with the 6100-07 Technology Level, or later
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level and SP 3, or later
        AIX Version 6.1 with the 6100-04 Technology Level and SP 7, or later
        AIX Version 6.1 with the 6100-03 Technology Level and SP 7, or later
        AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 1,or later
        AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 5,or later
        AIX Version 5.3 with the 5300-10 Technology Level and Service Pack 5,or later
        IBM i - not supported
        Red Hat Enterprise Linux Version 6 for Power, or later
        Red Hat Enterprise Linux Version 5.5 for Power, or later
        SUSE Linux Enterprise Server 11 or later
        SUSE Linux Enterprise Server 10 Service Pack 3 or later
      - Initial Order/MES/Both/Supported: Both
      - CSU: Yes
      - Return parts MES: No
    (#1882) - 146.8GB 10K RPM SAS SFF Disk Drive
    (No Longer Available as of November 26, 2010)
    146.8GB SFF SAS disk, in a carrier capable of providing Hot Swapsupport. Provides 146.8GB of storage capacity. Supports the industrystandard SAS interface. Can be used only in a system designed to supportthe SAS SFF disk drive in a carrier.
    Characteristics:
    - Cable included: None
    - External Interface: standard SAS Dual Port
    - Rotational Speed: 10,000 RPM
    - Interface Speed: 3Gbs (300 MBs)
    - Format: 512 Bytes/sector default, 528 Bytes/sector possible withreformat.
    - Attributes provided: 146.8GB of Disk Storage mounted in a carrier
    - Attributes required: one SFF SAS disk drive bay slot
    - For 8233-E8B: (#1882)
      - Refer to Software Requirements for AIX support
      - Refer to Software Requirements for Linux support
      - No IBM i support
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#1883) - 73.4 GB 15K RPM SAS SFF Disk Drive
  (No Longer Available as of April 29, 2011)
  73.4 GB SFF SAS disk, in a carrier capable of providing Hot Swapsupport. Provides 73.4 GB of storage capacity. Supports the industrystandard SAS interface. Can be used only in a system designed to supportthe SAS SFF disk drive in a carrier.
  Characteristics:
  - Cable included: None
  - External Interface: standard SAS Dual Port
  - Rotational Speed: 15,000 RPM
  - Interface Speed: 3Gbs (300 MBs)
  - Format: 512 Bytes/sector
  - Attributes provided: 73.4 GB of disk storage mounted in a carrier.
  - Attributes required: One SFF SAS disk drive bay slot
  - For 8233-E8B: (#1883)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - No IBM i support
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
(#1884) - 69.7 GB 15K RPM SAS SFF Disk Drive
(No Longer Available as of April 29, 2011)
69.7 GB SFF SAS disk, in a carrier capable of providing Hot Swapsupport. Provides 69.7 GB of storage capacity. Supports the industrystandard SAS interface. Can be used only in a system designed to supportthe SAS SFF disk drive in a carrier.
Characteristics:
- Cable included: None
- External Interface: standard SAS Dual Port
- Rotational Speed: 15,000 RPM
- Interface Speed: 3Gbs (300 MBs)
- Format: 528 Bytes/sector
- Attributes provided: 69.7 GB of disk storage mounted in a carrier.
- Attributes required: One SFF SAS disk drive bay slot
- For 8233-E8B: (#1884)
  - Refer to Software Requirements for IBM i support
  - No AIX support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#1885) 300GB 10K RPM SFF SAS Disk Drive (AIX/Linux)

(No Longer Available as of July 8, 2016)

300GB SFF SAS disk, in a carrier capable of providing Hot Swapsupport. The disk supports the industry standard SAS interface. Systemsthat accept SAS SFF disk drive in a carrier accommodate this SAS disk.

Characteristics:

Cable included: None
External Interface: standard SAS Dual Port
Rotational Speed: 10,000 RPM
Interface Speed: 3Gbs (300 MBs)
Format: 512 Bytes/sector default, 528 Bytes/sector possible withreformat.
Attributes provided: 300GB of Disk Storage mounted in a carrier
Attributes required: one SFF SAS disk drive bay slot
For 8233-E8B: (#1885)
- Refer to Software Requirements for AIX support
- Refer to Software Requirements for Linux support
- No IBM i support
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#1886) 146GB 15K RPM SFF SAS Disk Drive (AIX/Linux)

(No Longer Available as of July 8, 2016)

146.8 GB SFF SAS disk, in a carrier capable of providing Hot Swapsupport. Provides 146.8 GB of storage capacity. Supports the industrystandard SAS interface. Can be used only in a system designed to supportthe SAS SFF disk drive in a carrier.

Characteristics:

Cable included: None
External Interface: standard SAS Dual Port
Rotational Speed: 15,000 RPM
Interface Speed: 3Gbs (300 MBs)
Format: 512 Bytes/sector
Attributes provided: 146.8 GB of disk storage mounted in a carrier.
Attributes required: One SFF SAS disk drive bay slot
For 8233-E8B: (#1886)
- Refer to Software Requirements for AIX support
- Refer to Software Requirements for Linux support
- No IBM i support
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#1887) - Quantity 150 of #1793

(No Longer Available as of August 23, 2013)

This feature ships a quantity of 150 #1793 177GB SFF-2 SSD w/ eMLC(AIX/Linux) units. The configurator may either generate this feature orallow users to select this feature as they would any other single SSDunit feature. This feature remains on the inventory records.

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required:
- Form Factor: SFF SAS compliant (2.5' x 15mm form factor)
- Cable included: None
- External Interface: standard SAS Dual Port
- Rotational Speed: 15,000 RPM
- Interface Speed: 3Gbs (300 MBs)
- Format: 528 Bytes/sector
- Attributes provided: 139 GB of disk storage mounted in a carrier.
- Attributes required: One SFF SAS disk drive bay slot
- For 8233-E8B: (#1888)
  - Refer to Software Requirements for IBM i support
  - No AIX support
  - No Linux support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#1890) - 69GB SFF SAS Solid State Drive

(No Longer Available as of July 29, 2011)

The 69GB SFF SAS Solid State Drive (SSD) provides 69.7 GB of very highperformance storage, much faster than spinning disk drives with theirdelays due to positioning the disk arm and waiting for the spinning diskto rotate under the arm. SSD also provide lower power utilization thanspinning or hard disk drives (HDD). The drive is formatted to 69.7 GBand can be used by AIX, Linux (#1890) and IBM i (#1909). Both areidentical drives, but have different feature codes to help the IBMconfiguration tools understand how the SSD is used.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
- Attributes provided: 1 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot
- For 8233-E8B: (#1905)
  - Refer to Software Requirements for AIX support
  - No IBM i support
  - Refer to Software Requirements for Linux support
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply
Note:
Maximum of 2 allowed in CEC under AIX or Linux.
System maximum of 50 under AIX or Linux
Not supported under IBM i

(#1909) - 69GB SFF SAS Solid State Drive

(No Longer Available as of July 29, 2011)

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
- Attributes provided: 2 Fibre Channel
- Attributes required: 1 empty PCI or PCI-X 2.0 slot
- For 8233-E8B: (#1910)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - No IBM i support
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply
Note:
Maximum of 2 allowed in CEC under AIX or Linux.
System maximum of 50 under AIX or LInux.
Not supported under IBM i.
Please carefully consider the usage of this card. If placed in aPCI-X slot rated as SDR compatible and/or has the slot speed of 133 MHz,the AIX value of the max_xfer_size must be kept at the default setting of0x100000 (1 megabyte) when both ports are in use. The architecture ofthe DMA buffer for these slots does not accommodate larger max_xfer_sizesettings.

(#1911) - 283GB 10K RPM SFF SAS Disk Drive (IBM i)

(No Longer Available as of July 8, 2016)

283 GB SFF SAS disk in a carrier capable of providing Hot Swapsupport. Provides 283 GB of storage capacity. Supports the industrystandard SAS interface. Can be used only in a system designed to supportthe SAS SFF disk drive in a carrier.

Minimum required: 0
Maximum allowed: 80 (Initial order maximum: 80)
OS level required:
(#1972) - 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly
The 146.8 GB 15,000 RPM Ultra320 SCSI Disk Drive Assembly provides146.8 GB of storage capacity and supports the industry standard Ultra3SCSI interface speed of up to 320 MBps.
Characteristics:
- Attributes provided: 146.8 GB of disk storage mounted in a carrier.
- Attributes required: One disk drive bay.
- For 8233-E8B: (#1972)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - No IBM i support
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply
Note: System maximum of 576 under AIX or Linux. Not supported under IBMi.

(#1977) - 2 Gigabit Fibre Channel PCI-X Adapter

The 2 Gigabit Fibre Channel PCI-X Adapter is a 64-bit address/data,short form factor PCI-X adapter with an LC type external fiber connectorthat provides single or dual initiator capability over an optical fiberlink or loop. With the use of appropriate optical fiber cabling, thisadapter provides the capability for a network of high speed local andremote located storage. The 2 Gigabit Fibre Channel PCI-X Adapter willauto-negotiate for the highest data rate (either 1 Gbps or 2 Gbps) ofwhich the device or switch is capable. Distances of up to 500 metersrunning at 1 Gbps data rate and up to 300 meters running at 2 Gbps datarate are supported between the adapter and an attaching device or switch.When used with IBM supported Fibre Channel storage switches supportinglong-wave optics, distances of up to 10 kilometers are capable running ateither 1 Gps or 2 Gps data rates.

The 2 Gigabit Fibre Channel PCI-X Adapter can be used to attachdevices either directly, or by means of Fibre Channel Switches. Ifattaching a device or switch with a SC type fiber connector(s), use of anLC-SC 50 Micron Fiber Converter Cable (#2456) or a LC-SC 62.5 MicronFiber Converter Cable (#2459) is required.

Refer to the following IBM storage subsystem Web page for additionalsupported server attachment information for IBM devices.

Consult with your IBM representative or Business Partner foradditional information relative to any third party attachment.

Minimum required: 0
Maximum allowed: 50 (Initial order maximum: 0)
OS level required:
- Attributes provided: One full-duplex 1000Base-SX fiber connection toa Gigabit Ethernet LAN.
- Attributes required: One available PCI or PCI-X card slot
- For 8233-E8B: (#1978)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - No IBM i support
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: Does not apply
Note: Maximum of 2 allowed in CEC under AIX or Linux. System maximum of50 under AIX or Linux . Not supported under IBM i.

(#1979) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full DuplexGigabit Ethernet adapter designed with highly integrated components.This adapter can be configured to run at 10, 100, or 1000 Mbps datarates. The adapter interfaces to the system via the PCI-X bus andconnects to the network using a 4-pair CAT-5 Unshielded Twisted Pair(UTP) cable for distances of up to 100m. AIX Network Install Manager(NIM) boot capability is supported with this adapter. The adapterconforms to the IEEE 802.3ab 1000Base-T standard. The adapter alsosupports jumbo frames when running at the 1000 Mbps speed.

Note: For optimum performance, adapter should be placed in a 64 bit PCI-Xcard slot.

Limitations: The 1000 Mbps speed is not supported in Half Duplex(HDX) mode.

Minimum required: 0
Maximum allowed: 50 (Initial order maximum: 0)
OS level required:
- 128-bit graphics processor
- 8-bit CLUT or 24-bit true color
- 16 MB SDRAM
- 32-bit PCI interface
- Universal PCI (5.0v or 3.3v)
- 1 hardware color map
Features Supported
- X-Windows and Motif
- UMS 2.3.0 (no hardware scaling)

Minimum required: 0
Maximum allowed: 8 (Initial order maximum: 0)
OS level required:
(#2126) - Ultra 320 SCSI Cable 5 Meter
Ultra 320 SCSI Cable 5 meter for attachment to I/O drawer.
- Minimum required: 0
- Maximum allowed: 91 (Initial order maximum: 91)
- OS level required: None
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: No

(#2127) - Ultra 320 SCSI Cable 10 Meter

Ultra 320 SCSI Cable 10 meters for attachment to I/O drawer.

Minimum required: 0
Maximum allowed: 91 (Initial order maximum: 91)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: No

(#2128) - Ultra 320 SCSI Cable 20 Meter

Ultra 320 SCSI Cable 20 meters for attachment to I/O drawer.

Minimum required: 0
Maximum allowed: 91 (Initial order maximum: 91)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: No

(#2138) - 0.55 Meter Ultra 320 SCSI Cable

Ultra 320 SCSI Cable 0.55 Meter for I/O Drawer attachment.

Minimum required: 0
Maximum allowed: 91 (Initial order maximum: 91)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: No

(#2145) - Primary OS - IBM i

Indicates clients intend to use the IBM i operating system on the primarysystem partition. This feature is used as a Manufacturing Routingindicator and does not deliver parts, software or services.

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 1)
OS level required:
- Attributes provided: None
- Attributes required: Indicates clients intend to use the AIXoperating system on the primary system partition.
- For 8233-E8B: (#2146)
  - Refer to Software Requirements for AIX support
  - No Linux support
  - No IBM i support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#2147) - Primary OS - Linux

Indicates clients intend to use the Linux operating system on theprimary system partition. This feature is used as a ManufacturingRouting indicator and does not deliver parts, software or services.

Minimum required: 0
Maximum allowed: No Max (Initial order maximum: 1)
OS level required:
- Attributes provided: None
- Attributes required: None
- For 8233-E8B: (#2319)
  - AIX Version 7.1
  - AIX Version 6.1 with the 6100-06 Technology Level, or later
  - AIX Version 6.1 with the 6100-05 Technology Level, or later
  - AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
  - AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
  - AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
  - AIX Version 5.3 with the 5300-12 Technology Level, or later
  - AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
  - AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
  - AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
  - IBM i 7.1, or later
  - IBM i 6.1 with i 6.1.1 machine code, or later
  - Red Hat Enterprise Linux 6, or later
  - Red Hat Enterprise Linux 5.5, or later
  - SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
  - SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
- Initial Order/MES/Both/Supported: Initial
- CSU: N/A
- Return parts MES: No

(#2324) - Zero-priced Processor Activation for #8334

This feature will provide the customer with one processor activationat no additional charge. Available only with a qualifying IBM Edition.

Minimum required: 0
Maximum allowed: 16 (Initial order maximum: 16)
OS level required:
- Attributes provided: One processor activation for #8332
- Attributes required: Qualifying IBM Edition
- For 8233-E8B: (#2325)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - Refer to Software Requirements for IBM i support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#2326) - Zero-priced Processor Activation for #8336

This feature will provide the customer with one processor activationat no additional charge. Available only with a qualifying IBM Edition.

Minimum required: 0
Maximum allowed: 16 (Initial order maximum: 16)
OS level required:
- Attributes provided: One processor activation for #8335
- Attributes required: Qualifying IBM Edition
- For 8233-E8B: (#2327)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - Refer to Software Requirements for IBM i support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#2456) - 2M LC-SC 50 Micron Fiber Converter Cable

The 50 micron fiber cable is used to convert from LC type to SC typeconnectors. The 2 meter cable has a male LC type connector on one endand a female SC type connector on the other.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#2459) - 2M LC-SC 62.5 Micron Fiber Converter Cable

The 62.5 micron fiber cable is used to convert from LC type to SC typeconnectors. The 2 meter cable has a male LC type connector on one endand a female SC type connector on the other.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#2728) - 4 port USB PCIe Adapter

(No Longer Available as of August 31, 2017)

The PCI-Express 4 port USB adapter provides support for USB devices.In applications that require the use of an USB extension cable, use oneFC 4256 per port.

Minimum required: 0
Maximum allowed: 8 (Initial order maximum: 8)
OS level required:
- Attributes provided: USB Keyboard/Mouse Attachment
- Attributes required: One available PCI slot
- For 8233-E8B: (#2738)
  - Refer to Software Requirements for AIX support
  - Refer to Software Requirements for Linux support
  - No IBM i support
- Initial Order/MES/Both/Supported: Supported
- CSU: Yes
- Return parts MES: No
Note: Maximum of 2 allowed in CEC under AIX of Linux. System maximum of8 under AIX or Linux. Not supported under IBM i.

(#2849) - POWER GXT135P Graphics Accelerator with Digital Support

The POWER GXT135P is a versatile, low-priced 2D graphics acceleratorfor Power servers. It can be configured to operate in either 8-bit or24-bit color modes. This adapter supports both analog and digitalmonitors. Its predecessor, Feature Number 2848, supported only analogmonitors.

Hardware Description
- Up to approximately 16.7 million colors
- Rectangular clipping
- 2 analog monitor outputs at up to 1280 x 1024 resolution
- 1 analog monitor output at up to 2048 x 1536 resolution
- 1 digital monitor output at up to 1600 x 1200 resolution
- 60 to 85 Hz refresh rates (ISO 9241, Part 3)
APIs Supported
- The total number of Graphics Adapters in any one partition may notexceed four.
Attributes provided: 2D Graphics
Attributes required: 1 PCI slot
For 8233-E8B: (#2849)
- Refer to Software Requirements for AIX support
- Refer to Software Requirements for Linux support
- No IBM i support
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: No

Note: Maximum of 2 allowed in CEC under AIX or Linux. System maximum of8 under AIX or Linux. Not supported under IBM i.

(#2861) - ARTIC960Hx 4-Port EIA-232 Cable

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#2863) - ARTIC960Hx 4-Port X.21 Cable

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#2864) - ARTIC960Hx 4-Port V.35 (DTE) Cable

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: Supported
CSU: Yes
Return parts MES: Does not apply

(#2893) - PCIe 2-Line WAN w/Modem

(No Longer Available as of July 11, 2014)

The #2893 is a 2-line/port WAN w/modem PCIe adapter. This feature isthe non-CIM (Complex Impedance Matching) version offered in all countriesexcept Australia and New Zealand.

Port 0 is the modem port and supports V.92 56K Async PPP, V.92 datamodem, V.44 data compression, V.34 FAX modem and FAX functions, such asECM and 2D/1D conversion.

Port 0 does not provide Sync modem capabilities (SDLC and Sync PPP).Port 1 is the RVX port and supports multiple communications protocols,including synchronous operations.

Select one of the following cables to attach to port 0(modem port):

#0348 - V.24/EIA232 20-Ft PCI Cable
#0353 - V.35 20-Ft PCI Cable
#0359 - X.21 20-Ft PCI Cable
#0367 - Operations Console PCI Cable (ships with a 25 pin to 9 pinadapter) Multiple #0367 cables can be ordered but only one per #2893) toserve as consoles for secondary partitions when Logical Partitioning isutilized. ECS is supported from both the modem port, and the RVX port.

The following cable is required to support ECS from the RVX port:

Attributes provided: One PCIe slot
Attributes required: Modem
For 8233-E8B: (#2893)
- No AIX support
- Refer to Software Requirements for Linux support
- Refer to Software Requirements for IBM i support
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

Note: CEC maximum of 3 under IBM i or Linux. System maximum of 41 underIBM i or Linux. Not supported under AIX.

(#2934) - 3M Asynchronous Terminal/Printer Cable EIA-232

The Asynchronous Printer/Terminal Cable is used for attachingprinters, plotters, and terminals that support the EIA-232 standard toany asynchronous adapter. This cable is the equivalent of thecombination of FC 2936 (modem cable) and FC 2937 (printer/terminalinterposer) and replaces this method of printer/terminal attachment.

This cable is 3m (9.8 feet) long, uses DB25 connectors and issupported on all RS/6000 systems using any asynchronous ports.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#2936) - Asynchronous Cable EIA-232/V.24 3M

Used to attach a modem to the standard I/O ports with the 10-pin to25-pin converter cable (#3925), 8-port Cable Assembly, 16-Port CableAssembly. The cable is 3 meters (9.8 feet) in length.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#2943) - 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

For connection of up to 8 asynchronous EIA-232 or RS-422 devices. Alleight ports are software programmable to support either EIA-232E orRS-422A protocols, at up to 230K baud.

Minimum required: 0
Maximum allowed: 18 (Initial order maximum: 0)
OS level required:
(#3694) SAS Cable (YO) Adapter to SAS Enclosure, Single Controller/Dual Path 15M
This SAS cable (YO) connects a remote SAS drawer to a SAS controlleradapter. This cable supports single controller/dual path attach betweenthe SAS controller adapter and the SAS disk drawer. This cable has oneMini SAS 4X plug connector on the adapter end keyed for an END DEVICE,wired in 4x mode and two Mini SAS 4X plug connectors on the drawer endkeyed for ENCLOSURE DOWN Arrow, both are wired in 2x mode. Follow thedirections on the connector labels when attaching the connectors on thiscable. This cable is 15 meters long, choose the SAS (YO) cable lengththat matches the distance between the adapter and the SAS disk drawer.
- Minimum required: 0
- Maximum allowed: No max (Initial order maximum: No max)
- OS level required: None
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#3925) - 0.3M Serial Port Converter Cable, 9-Pin to 25-Pin

This cable converts the 9-pin serial port on the system to a 25-pinserial port which allows the user to attach 25-pin serial devices to thesystem.

Minimum required: 0
Maximum allowed: 9999 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#3926) - Asynch Printer/Terminal Cable, 9-pin to 25-pin, 4M

(No Longer Available as of July 29, 2011)

This 4-meter cable and transposer (2 parts) allows external asyncdevices such as printers or terminals to be attached directly to the9-pin serial port. This is equivalent to using #3925 in combination with#2934.

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#3927) - Serial Port Null Modem Cable, 9-pin to 9-pin, 3.7M

This 3.7 meter 9 pin to 9 pin Null modem Serial cable allows twoEIA-232 communications ports to exchange data with one another withoutgoing through a modem.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#3928) - Serial Port Null Modem Cable, 9-pin to 9-pin, 10M

This 10 meter 9 pin to 9 pin Null Modem Serial cable allows twoEIA-232 communications ports to exchange data with one another withoutgoing through a modem.

Minimum required: 0
Maximum allowed: No max (Initial order maximum: No max)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#3930) - System Serial Port Converter Cable

This cable is used to connect the System port/UPS Conversion Cable(#1827) to the CEC serial port. Also used to connect an ASCII terminalor modem to the serial port which is physically an RJ45 connection on thePower 710/720/730/740 system unit .

Minimum required: 0
Maximum allowed: 9999 (Initial order maximum: 250)
OS level required: None
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#4242) 1.8 M (6-ft) Extender Cable for Displays (15-pin D-shell to 15-pin D-shell)

(No Longer Available as of March 31, 2018)

This cable is required to connect displays with a 15-pin 'D' shellconnector to the appropriate accelerator connector when it is fartheraway than the attached monitor cable can reach. Rack mounted systems arelikely candidates for this extender cable.

For 8233-E8B: (#4242)
- Attributes provided: 2M Extension Cable
- Attributes required: USB Keyboard
- For 8233-E8B: (#4256)
  - Attributes provided: VGA to DVI connection converter
  - Attributes required: VGA device and graphics adapter with DVIconnector.
  - For 8233-E8B: (#4276)
    - Attributes provided: 70.56GB disk unit
    - Attributes required: Disk unit slot and a disk unit controller
    - For 8233-E8B: (#4327)
      - No AIX support
      - No Linux support
      - Refer to Software Requirements for IBM i support
    - Initial Order/MES/Both/Supported: Supported
    - CSU: Yes
    - Return parts MES: Does not apply
  (#4328) - 141.12GB 15k rpm Disk Unit
  Provides a 15,000 rpm disk unit with 141.12GB capacity and a Ultra-4(Ultra320) SCSI interface.
  - Minimum required: 0
  - Maximum allowed: 576 (Initial order maximum: 0)
  - OS level required:
    - Attributes provided: 282.25GB disk unit
    - Attributes required: Disk unit slot and a disk unit controller
    - For 8233-E8B: (#4329)
      - No AIX support
      - No Linux support
      - Refer to Software Requirements for IBM i support
    - Initial Order/MES/Both/Supported: Supported
    - CSU: Yes
    - Return parts MES: Does not apply
  (#4367) - Package 5X #2055 & 20X #1995 (AIX/Linux)
  (No Longer Available as of August 23, 2013)
  This feature will deliver a packaged of five PCIe RAID & SSD SASAdapters 3Gb w/ Blind Swap Cassette (equivalent to #2055) and twenty177GB SSD Modules with eMLC (equivalent to #1995) for AIX and Linux.
  Feature 4367 is used to order and remains in IBM AAS records.Features #2055 and #1995 are not used with this feature.
  - Minimum required: 0
  - Maximum allowed: 4 (Initial order maximum: 4)
  - OS level required:
    - Attributes provided: 5 x #2055 and 20 x #1996
    - Attributes required: One internal USB port and at least one #1106 or#1107 or #EU01. Requires HH bay in system unit. Can not be installedconcurrently with a tape drive in the HH bay.
    - For 8233-E8B: (#4377)
      - IBM i 7.1 or later
      - IBM i 6.1 with 6.1.1 machine code or later
      - AIX not supported use #1995
      - SuSE Linux Enterprise Server Version not supported use #1995
      - Red Hat Enterprise Linux not supported use #1995
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#4526) - 8GB (2x4GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
  (No Longer Available as of July 31, 2014)
  Provides 8GB of system memory with two 4GB DIMMs.
  - Minimum required: 0
  - Maximum allowed: 16 (Initial order maximum: 16)
  - OS level required:
    - Attributes provided: 16GB of system memory
    - Attributes required: Two empty memory DIMM positions
    - For 8233-E8B: (#4527)
      - Refer to Software Requirements for AIX support
      - Refer to Software Requirements for Linux support
      - Refer to Software Requirements for IBM i support
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  (#4528) - 32GB (2x16GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
  (No Longer Available as of July 31, 2014)
  Provides 32GB of system memory with two 16GB DIMMs.
  - Minimum required: 0
  - Maximum allowed: 16 (Initial order maximum: 16)
  - OS level required:
    - Attributes provided: 32GB OF DDR3 memory. Consists of two 16GBDIMMS
    - Attributes required: 2 empty DIMM slots
    - For 8233-E8B: (#4544)
      - AIX Version 6.1 with the 6100-04 Technology Level and Service Pack 2,or later
      - AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 2,or later
      - IBM i 6.1 with i 6.1.1 machine code, or later
      - SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
      - SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
    - Initial Order/MES/Both/Supported: Both
    - CSU: Yes
    - Return parts MES: No
  One and only one rack indicator features is required on
  all orders (#4650 to #4666).
  (#4650) - Rack Indicator- Not Factory Integrated
  (No Longer Available as of January 3, 2014)
  This indicator is used to specify that the rack mountable device inthis initial order should not be merged into a rack within IBMManufacturing.
  Note: This 'no additional charge' feature will be placed on an initialorder for a rack mountable device by the Configuration Tool when theorder does not include a 19' Rack.
  Note: A rack integration indicator is required on all 19' Rack mountabledevice initial orders. One feature code from the group 4650 to 4666 mustbe listed on the order. More than one feature code from this group isnot allowed.
  - Minimum required: 0
  - Maximum allowed: 1 (Initial order maximum: 1)
  - OS level required: None
  - Initial Order/MES/Both/Supported: Initial
  - CSU: N/A
  - Return parts MES: Does not apply
(#4651) - Rack Indicator, Rack #1
(No Longer Available as of January 3, 2014)
When added to an initial rack order, this indicator is used to specifythe first rack for a multi rack order, or the only rack for a single rackorder.
When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #1.
Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.
For 19' rack orders: If IBM Mfg. is to assemble a rack mountabledevice into the rack, one feature code selection from the group 4651 to4666 must be listed on the order. More than one feature code selectionfrom this group is not allowed. The quantity of this selected featurecode on the 19' rack order must equal the number of rack mountabledevices to be installed in the rack by IBM Mfg.
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required: None
- Initial Order/MES/Both/Supported: Initial
- CSU: N/A
- Return parts MES: Does not apply

(#4652) - Rack Indicator, Rack #2

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe second rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #2 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

For 19' rack orders: If IBM Mfg. is to assemble a rack mountabledevice into the rack, one feature code selection from the group 4651 to4666 must be listed on the order. More than one feature code selectionfrom this group is not allowed. The quantity of this selected featurecode on the 19' rack order must equal the number of rack mountabledevices to be installed in the rack by IBM Mfg.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4653) - Rack Indicator, Rack #3

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe third rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #3 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4654) - Rack Indicator, Rack #4

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe fourth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #4 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4655) - Rack Indicator, Rack #5

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe fifth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #5 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4656) - Rack Indicator, Rack #6

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe sixth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #6 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4657) - Rack Indicator, Rack #7

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe seventh rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #7 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4658) - Rack Indicator, Rack #8

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe eighth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #8 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4659) - Rack Indicator, Rack #9

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe ninth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #9 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4660) - Rack Indicator, Rack #10

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe tenth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #10 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4661) - Rack Indicator, Rack #11

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe eleventh rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #11 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4662) - Rack Indicator, Rack #12

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe twelfth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #12 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4663) - Rack Indicator, Rack #13

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe thirteenth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #13 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4664) - Rack Indicator, Rack #14

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe fourteenth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #14 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4665) - Rack Indicator, Rack #15

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe fifteenth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #15 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4666) - Rack Indicator, Rack #16

(No Longer Available as of January 3, 2014)

When added to an initial rack order, this indicator is used to specifythe sixteenth rack for a multi rack order.

When added to an initial rack mountable device order, this indicatoris used to specify that the rack mountable device (such as a system orI/O drawer) is to be mounted in rack #16 of a multi rack order.

Note: For 19' rack mountable device orders: One feature code from thegroup 4650 to 4666 must be listed on the order. More than one featurecode from this group is not allowed.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required: None
Initial Order/MES/Both/Supported: Initial
CSU: N/A
Return parts MES: Does not apply

(#4764) - PCI-X Cryptographic Coprocessor (FIPS 4)

(No Longer Available as of July 29, 2011)

Provides both cryptographic coprocessor and secure-key cryptographicaccelerator functions in a single PCI-X card. The coprocessor functionsare targeted to banking and finance applications. Financial PINprocessing and Europay, MasterCard, Visa (EMV) credit card functions areprovided. EMV is a standard for integrated-chip based credit cards. Thesecure-key accelerator functions are targeted to improving theperformance of Secure Sockets Layer (SSL) transactions. The #4764provides the security and performance required to support eBusiness andemerging digital signature applications. Host application access to thecryptographic services of the #4764 are via the Common CryptographicArchitecture (CCA) application programming interfaces (APIs) oradditionally via Public-Key Cryptographic Standards (PKCS#11) APIs. Onlyone API can be loaded on a single feature 4764 card.

The #4764 provides secure storage of cryptographic keys in a tamperresistant hardware security module (HSM), which is designed to meet FIPS140 security requirements. FIPS 140 is a U.S. Government NationalInstiute of Standards & Technology (NIST) administered standard andcertification program for cryptographic modules.

Feature 4764 PCI-X Cryptographic Coprocessor (FIPS 4) users will beable to down load firmware for AIX from the following URL replacing thefirmware CD previously provided.

Please refer to the following URL for the latest firmwareand software updates:

Attributes provided:

One PCI-X card slot per 4764 FC.
Note: Only one API (CCA or PKCS11 but not both) can be loaded per4764 Feature.

For 8233-E8B: (#4764)

Refer to Software Requirements for AIX support
No Linux support
Refer to Software Requirements for IBM i support

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note: Maximum of 2 allowed in CEC under AIX or IBM i. System maximum of32 under AIX; 8 under IBM i. Not supported by Linux. Please validatethat software components which provide SSL are enabled to use hardwarecryptographic devices through the PKCS#11 or CCA API's. If assistance isneeded in determining if the device will meet your needs please contact

Attributes provided: None

Attributes Required: Available HMC

For 8233-E8B: (#4792)

Refer to Software Requirements for AIX support
Only available with AIX 6.1 with the 6100-04 Technology Level andService Pack 2, or later
Not supported under IBM i
Not supported under Linux

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

(#4807) - PCIe Crypto Coprocessor No BSC 4765-001

(No Longer Available as of February 27, 2015)

Secure-key adapter provides both cryptographic coprocessor andcryptographic accelerator functions in a single PCIe card. The adapteris well suited to applications requiring high-speed, security-sensitive,RSA acceleration, cryptographic operations for data encryption anddigital signing, secure management, and use of cryptographic keys, orcustom cryptographic applications. It provides secure storage ofcryptographic keys in a tamper-resistant hardware security moduledesigned to meet FIPS 140-2 level 4 security requirements. The adapteris a PCIe 4x full height - short card.

#4807, #4808 and #4809 are all feature codes representing the samephysical card with the same CCIN of 4765, but different feature codes areused to indicate if a blind swap cassette is used and its type. #4807indicates no blind swap cassette. #4808 indicates a Gen 3 blind swapcassette. #4809 indicates a Gen 4 blind swap cassette.

Other IBM PCIe Cryptographic Coprocessor adapter highlights

http://www-03.ibm.com/security/cryptocards/

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required:
- Max of 2 #4807 per CEC
- The combine System Max limit for #4807 and #4808 is 10.
- #4808 System Max is 8 when there are no #4807 in the CEC.
- A Max of 4 #4808 per #5802 or #5877.

(#4808) - PCIe Crypto Coprocessor Gen3 BSC 4765-001

(No Longer Available as of February 27, 2015)

Other IBM PCIe Cryptographic Coprocessor adapter highlights

http://www-03.ibm.com/security/cryptocards/

Minimum required: 0
Maximum allowed: 10 (Initial order maximum: 10)
OS level required:
- Max of 2 #4807 per CEC
- The combine System Max limit for #4807 and #4808 is 10.
- #4808 System Max is 10 when there are no #4807 in the CEC.
- A Max of 4 #4808 per #5802 or #5877.

(#4988) - One Processor of 5250 Enterprise Enablement

This feature will activate one processors worth of 5250 EnterpriseEnablement in an IBM i environment.

Minimum required: 0
Maximum allowed: 32 (Initial order maximum: 32)
OS level required:
- Attributes provided: Full 5250 Enterprise Enablement
- Attributes required: IBM i environment
- For 8233-E8B: (#4989)
  - AIX not supported
  - IBM i
  - Linux not supported
  - Refer to Software Requirements for specific Operating System support
- Initial Order/MES/Both/Supported: Both
- CSU: Yes
- Return parts MES: No

(#5000) - Software Preload Required

(No Longer Available as of January 3, 2014)

Indicates that preloaded software and/or consolidated I/O is shippedwith the initial order. A maximum of one (#5000) is supported. Thisfeature has country-specific usage.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:
- Attributes provided: Customization
- Attributes required: None
- For 8233-E8B: (#5001)
  - Attributes provided: CSC support
  - For 8233-E8B: (#5002)
    - IBM i 6.1 with i 6.1.1 Machine Code, or later.
  - Initial Order/MES/Both/Supported: Initial
  - CSU: N/A
  - Return parts MES: Does not apply
(#5160) - Power Dist Unit 1 Phase NEMA
This feature provides a single phase NEMA PDU for 19 inch Racks. EachPDU provides six outlets.
System units and/or expansion units would use a #6458 line cord toconnect to the #5160.
The following line cords are supported on the #5160:
- Minimum required: 0
- Maximum allowed: 192 (Initial order maximum: 0)
- OS level required:
  - #1449 - 4.3m 200V/32A Pwr Cd EU 1-PH
  - Attributes provided: Power Distribution Unit
  - Attributes required: 19 Inch Rack
  - For 8233-E8B: (#5161)
    - No AIX support
    - No Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
(#5162) - Power Dist Unit 2 of 3 Phase
This feature provides a 2 of 3 phase Power Distribution Unit (PDU) foriSeries Racks. Each PDU provides six outlets.
The following line cord is supported on the #5162:
- Minimum required: 0
- Maximum allowed: 192 (Initial order maximum: 0)
- OS level required:
  - #1477 - 4.3m 200V/16A PWR CD
  - Attributes provided: Power Distribution Unit
  - Attributes required: 19 Inch Rack
  - For 8233-E8B: (#5163)
    - No AIX support
    - No Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
(#5289) - 2 Port Async EIA-232 PCIe Adapter
(No Longer Available as of August 14, 2015)
Adapter provides connection for 2 asynchronous EIA-232 devices. Portsare programmable to support EIA-232 protocols, at a line speed of 128Kbps. Two RJ45 connections are located on the rear of the adapter. Toattach to devices using a 9-pin (DB9) connection, use an RJ45-to-DB9converter. For convenience, one converter is included with this feature.One converter for each connector needing a DB9 connector is needed.
The converter cable shipped with the feature is a 10-pin RJ-45approximately 30 cm or 1 foot in length. 10-pin is often used for DCEdevices like modems. DTE devices may be able to use fewer pinconnections. Multiple RJ-45 pin out options are used and sold acrossthe industry. The #3930 feature provides an 8-pin RJ45-to-DB9 convertercable. If an addition 10-pin RJ45-to-DB9 connector like the cableprovided with the adapter is desired, it is commonly available frommultiple sources and identified as a serial cable with a Digi partnumber 76000239. It is also possible to look up the cable's pin outspecifications and build your own cables.
Note: #5289 and # 5290 are physically and electrically identical adaptersexcept for the type of PCIe slot used (full-high or low profile). Notealso the 2-port #5289/5290 is functionally nearly identical to the4-port #5785/5277 except for the number and type of connectors.
Limitation: As of 2012, IBM i does not support PPP protocol. Also IBMi only supports use on POWER7 and POWER7+ servers.
- Attributes provided: 2-Port Asynchronous EIA-232 via 2x RJ45connectors, one RJ45-to-DB9 converter cable
- Attributes required: 1 full high PCIe Slot
- For 8233-E8B: (#5289)
  - AIX Version 6.1 with the 6100-07 Technology Level
  - AIX Version 7.1 with the 7100-01 Technology level
  - AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 5
  - IBM i - not supported
  - Red Hat Enterprise Linux 5.7 for POWER, or later
  - Red Hat Enterprise Linux 6.1 for POWER, or later
  - SUSE Linux Enterprise Server 11 SP1 for POWER Systems, or later
  - SUSE Linux Enterprise Server 10 SP4 for POWER Systems, or later
  Additional driver is required to be installed for the above Linuxlevels. For detail problem description and instructions, visit:
  Attributes provided: RFIDs
  Attributes required: Server CEC, Blade, Bladecenter, MTM Rack, orHMC
  For 8233-E8B: (#5524)
  - Attributes provided: System Console on Hardware ManagementConsole(HMC)
  - Attributes required: Hardware Management Console (HMC)
  - For 8233-E8B: (#5550)
    No AIX support
    No Linux support
    Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
(#5553) - Sys Console-Ethernet No IOP
This specify indicates the use of an embedded CEC LAN port for thesystem console connection using Operations Console (LAN).
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Attributes provided: Two 12X channel remote I/O ports
  - Attributes required: Available GX++ slot
  - For 8233-E8B: (#5609)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
(#5613) Dual Port (SR) Integrated Virtual Ethernet 10Gb Daughter Card
(No Longer Available as of August 31, 2017)
Integrated I/O connectors for a CEC enclosure. Provides two 10 GbShort Range Ethernet optical connection that can be Virtualized into thesystem LPARs. All of the connectors are on the rear bulkhead of the CECenclosure.
One of the features #5623, #5613 and #5624 may be mixed in multienclosure systems.
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Attributes provided: Two 12X Channel remote I/O ports
  - Attributes required: Available GX slot
  - For 8233-E8B: (#5616)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
(#5619) - 80/160GB DAT160 SAS Tape Drive
(No Longer Available as of February 14, 2014)
The Internal Tape Drive is a 5.25-inch, half-high for save/restore andarchive functions. This DDS Gen6 tape drive uses the new larger IBMDAT160 and 4-mm data cartridges and is compression capable, providing acapacity of up to 160 GB (assuming 2:1 compression ratio) - a significantincrease in capacity over the previous 36/72 GB 4-mm internal tape drives(when using DAT160 Data Cartridge)
Characteristics
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Attributes provided: Two 1 Gb Integrated Virtual EthernetConnections
  - Attributes required: None
  - For 8233-E8B: (#5623)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
  Note: Not available in Haiti.
(#5624) - 4-Port 1Gb Integrated Virtual Ethernet Daughter Card
(No Longer Available as of December 31, 2016)
Integrated I/O connectors for a CEC enclosure. Provides four 1 GbShort Range Ethernet connections (RJ-45) that can be Virtualized into thesystem LPARs. All of the connectors are on the rear bulkhead of the CECenclosure.
One of the features #5623, #5613 and #5624 may be mixed in multienclosure systems
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Capacity: 1.6 TB native mode, 3.0 TB (typical) compression mode
  - Form Factor: 5.25-inch half high
  Media
  - Operation: Streaming
  - Data Transfer Rate: 140 MB/sec with LTO-5 media
  - Speed matching down to 40 MB/sec
  - Interface: SAS
  - Attributes provided: Feature includes one each of the following,HHLTO-5 SAS Tape Drive, LTO-5 Cleaning Cartridge, and LTO-5 TestCartridge.
  - Attributes required: One 1.6-inch (41mm) half-high media bay
  - For 8233-E8B: (#5638)
    - AIX Version 7.1, or later
    - AIX Version 6.1 with the 6100-06 Technology Level, or later
    - AIX Version 6.1 with the 6100-05 Technology Level and SP 3, or later
    - AIX Version 6.1 with the 6100-04 Technology Level and SP 7, or later
    - AIX Version 6.1 with the 6100-03 Technology Level and SP 7, or later
    - AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 1,or later
    - AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 5,or later
    - AIX Version 5.3 with the 5300-10 Technology Level and Service Pack 5,or later
    - IBM i 6.1 with i 6.1.1 machine code, or later
    - IBM i 7.1, or later
    - SUSE Linux Enterprise 10, Service Pack 3 or later
    - SUSE Linux Enterprise 11, Service Pack 1 or later
    - Red Hat Enterprise Linux Version 5.6 or later
    - Red Hat Enterprise Linux Version 6 or later
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
  Note: VIOS attachment requires, version 2.2 or later
(#5646) - Blind Swap Type III Cassette- PCIe, Short Slot
(No Longer Available as of August 31, 2017)
This feature contains a blind swap cassette for one, single width PCIExpress or PCI-X adapter designed to meet the 'short' adapter sizedefined in the PCI Standard and used in a slot defined as a 'short' slot.Use FC #5647 for PCI adapters that are mounted in a 'standard' length PCIslot.
- Minimum required: 0
- Maximum allowed: 2 (Initial order maximum: 0)
- OS level required: None
- Initial Order/MES/Both/Supported: MES
- CSU: Yes
- Return parts MES: No

(#5647) - Blind Swap Type III Cassette- PCI-X or PCIe, Standard Slot

(No longer available as of April 19, 2019)

This feature contains a blind swap cassette for one, single width PCIExpress adapter or PCI-X adapter that will be mounted in a StandardLength PCI slot. It includes the necessary hardware to mount varioussizes of single width PCI adapters that may be less than standard size.Use FC #5646 for PCI adapters that are mounted in 'short' PCI slots.

Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 0)
OS level required: None
Initial Order/MES/Both/Supported: MES
CSU: Yes
Return parts MES: No

(#5661) - DAT320 160/320 GB Tape Drive

(No Longer Available as of July 29, 2011)

The internal Tape drive is a half-high form factor for save/ restoreand archive functions. This DDS Gen7 tape drive uses the new DAT320 DATcartridge, and is compression capable, providing a capacity of to 320 GB(assuming 2:1 compression ratio) a significant increase in capacity overthe previous DAT160 #5619 80/160GB internal tape drive (when using DAT320Data Cartridges)

Characteristics

Attributes provided: DAT320 160/320 GB Tape Drive
Attributes required: Available half-high media bay and Right AngleSAS Tape Drive Cable (#3657)
For 8233-E8B: (#5661)
- Refer to Software Requirements for AIX support
- Refer to Software Requirements for Linux support. Linux support forthis feature is planned to be available on March 16, 2010.
- Refer to Software Requirements for IBM i support. IBM i support forthis feature is planned to be available on March 16, 2010
Initial Order/MES/Both/Supported: Both
CSU: Yes
Return parts MES: No

(#5679) - SAS RAID Enablement

(No Longer Available as of December 31, 2016)

The SAS RAID Enablement feature provides the internal SAS enclosurewith 0, 5, 6 and 10 RAID function and Auxiliary cache via backplanepluggable daughter cards. The daughter cards contains the RAID functionand a 175MByte of Write Cache. The Auxiliary daughter card plugs into aspecial slot on the planar and provides battery power pack and redundant175MByte write cache memory for the daughter card. Concurrentmaintenance of the RAID daughter card and the Auxiliary daughter card isnot supported; however, concurrent maintenance of the battery pack issupported.

A SAS DASD/Media Backplane with an external SAS port in combinationwith feature number 5679 provides one external RAID enabled SAS port.

Minimum required: 0
Maximum allowed: 1 (Initial order maximum: 1)
OS level required:
- Attributes provided: Five DAT160 Data Cartridges
- Attributes required: None
- For 8233-E8B: (#5689)
  - Attributes provided: One full-duplex 1000Base-SX fiber connection toa Gigabit Ethernet LAN.
  - Attributes required: One available PCI or PCI-X card slot
  - For 8233-E8B: (#5700)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
  Note: Maximum of 2 allowed in CEC under AIX, IBM i or Linux. Systemmaximum of 50 under AIX, Linux or IBM i.
(#5701) - IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter
The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full DuplexGigabit Ethernet adapter designed with highly integrated components.This adapter can be configured to run at 10, 100, or 1000 Mbps datarates. The adapter interfaces to the system via the PCI-X bus andconnects to the network using a 4-pair CAT-5 Unshielded Twisted Pair(UTP) cable for distances of up to 100m. AIX Network Install Manager(NIM) boot capability is supported with this adapter. The adapterconforms to the IEEE 802.3ab 1000Base-T standard. The adapter alsosupports jumbo frames when running at the 1000 Mbps speed.
Note: For optimum performance, adapter should be placed in a 64 bit PCI-Xcard slot.
Limitations: The 1000 Mbps speed is not supported in Half Duplex(HDX) mode.
IOP and IOPless version
- Minimum required: 0
- Maximum allowed: 50 (Initial order maximum: 0)
- OS level required:
  Note: CEC maximum of 3 under AIX, IBM i, or Linux. System maximum of 41under AIX, IBM i, or Linux.
(#5778) - PCI-X EXP24 Ctl-1.5GB No IOP
Provides an EXP24 disk controller with PCI-X DDR technology, a maximumof 1.5GB compressed write cache and a maximum 1.6GB compressed readcache. The controller supports RAID-5 and RAID-6 and mirroring issupported via i5/OS. Embedded auxiliary write cache and concurrentbattery maintenance are provided. The controller is implemented usingtwo physical cards that are firmly connected and requires two adjacentPCI slots. It provides three Ultra320 SCSI ports/buses for theattachment of disk drives located in a #5786 TotalStorage EXP24 DiskDrawer. #5782 is the same adapter card, but with the #5782 the adapteris placed in a double-wide blind swap cassette.
- Minimum required: 0
- Maximum allowed: 1 (Initial order maximum: 1)
- OS level required:
  - Attributes provided: High-performance SCSI RAID controller in adouble wide blind swap cassette.
  - Attributes required: Two adjacent PCI-X long card slots, in a blindswap capable system unit or expansion unit.
  - For 8233-E8B: (#5782)
    - No AIX support
    - No Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
  Note: Not supported in CEC. System maximum of 16 under IBM i. Notsupported under AIX or Linux.
(#5785) - 4 Port Async EIA-232 PCIe Adapter
(No Longer Available as of August 31, 2017)
Connection for 4 asynchronous EIA-232 devices. Ports are programmableto support EIA-232 protocols, at a line speed of 128K bps. One connectoron the rear of the adapter provides attachment for a fan-out cable(provided) which provides four EIA-232 ports. Note #5785 and # 5277 arephysically and electrically identical adapters, except for the type ofPCIe slot used (full-height or low-profile). Note also the 4-port#5289/5290 is functionally nearly identical to the 2-port #5289/5290except for the number and type of connectors.
- Minimum required: 0
- Maximum allowed: 18 (Initial order maximum: 18)
- OS level required:
  - #2138 0.55m SCSI Cable
  - #2124 1m SCSI Cable
  - #2125 3m SCSI Cable
  - #2126 5m SCSI Cable
  - #2127 10m SCSI Cable
  - #2128 20m SCSI Cable
  - Attributes provided: 24 Ultra 320 SCSI disk unit slots
  - Attributes required: Disk controller with external Ultra 320 SCSIport and 4 EIA units of space in a 19-inch rack
  - For 8233-E8B: (#5786)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Supported
  - CSU: Yes
  - Return parts MES: Does not apply
  Note: CEC maximum of 2 under AIX, IBM i, or Linux. System maximum of 24under AIX, IBM i, or Linux.
(#5787) - TotalStorage EXP24 Disk Twr
Provides disk slots for up to 24 disk units in a 19-inch, 4 EIA highrack drawer. The #5786 provides redundant power, redundant cooling, andUltra 320 SCSI interface connections for 24 Ultra 320 SCSI disk unitsthat are organized in four independent groups of six disk units.
#5741 and/or #5742 EXP24 Disk Slot Enablers (SCSI repeaters) enablethese groups of six disk unit slots. The enabled disk slots are drivenby SCSI disk controllers located outside the #5786 and connected by aSCSI cable. One to four Disk Slot Enablers are required, depending onthe number of disk unit groups populated with disk units.
One external port on a disk controller such as a #5736/#5776/#5778/#5782 is required for each #5741 installed. Likewise, one externaldisk controller port is required for each #5742 installed and cabled torun one group of six disk slots. Alternately, two #5742s can be cabledsuch that a single disk controller can run two groups of six disk slots.Or, one #5741 plus one #5742 can also be cabled such that a single diskcontroller can run two groups of six disk slots.
The following SCSI cables are available:
- Minimum required: 0
- Maximum allowed: 24 (Initial order maximum: 0)
- OS level required:
  - Attributes provided: 6 PCI-X DDR slots for blind swap I/O adapters
  - Attributes required: Rack space in a #7314 I/O Drawer MountingEnclusure. 12X cable(s). 12X Short Run or Long Run card, and SPCNcable(s).
  - For 8233-E8B: (#5796)
    - Refer to Software Requirements for AIX support
    - Refer to Software Requirements for Linux support
    - Refer to Software Requirements for IBM i support
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
  Note: System maximum of 8 under AIX, IBM i, or Linux.
(#5802) - 12X I/O Drawer PCIe, SFF disk
(No Longer Available as of August 31, 2017)
This feature provides a 4U high I/O drawer containing ten PCIe slotsand eighteen SAS hot-swap Small Form Factor disk bays. This drawerattaches to the central electronics complex via 12X DDR cables (#1862,#1864, or #1865). When SFF Disk are installed, they are driven by atleast one SAS PCIe adapter and SAS AT cable (#3688). Using a mode switchthe 18 SFF slots can be configured as one group of 18 slots (AIX/Linux)or two groups or 9 slots (AIX/IBM i/Linux) or four groups of 4 or 5 slots(AIX/Linux).
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required:
  - Supports up to 48 SAS disks, when configured with four #5886 EXP12S Disk Drawers or two #5887/EL1S EXP24S Disk Drawer
  - SAS speed = 3 Gbs
  - SAS Serial SCSI Protocol (SSP)and Serial Management Protocol (SMP)
  - 380 MB of non-volatile fast write cache can increase disksubsystem performance
  - Dual controller supports mirrored write cache data and mirroredRAID parity footprints
  - Concurrent Firmware Update
  - Attributes provided: Eight physical links via two mini SAS 4xconnectors
  - Attributes required: Configuration always requires even pairs of#5805 (or #5903/5805). SAS Media devices are not supported. Whenattaching #5886 EXP12S or #5887/EL1S EXP24S at least one of thefollowing SAS (X) cables #3661, #3662 or #3663 must be used
  - For 8233-E8B: (#5805)
    - AIX Version 7.1 supported
    - AIX Version 6.1 with the 6100-04 Technology Level and Service Pack 2,or later
    - AIX Version 6.1 with the 6100-03 Technology Level and Service Pack 5,or later
    - AIX Version 6.1 with the 6100-02 Technology Level and Service Pack 8,or later
    - AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 2,or later
    - AIX Version 5.3 with the 5300-10 Technology Level and Service Pack 4,or later
    - AIX Version 5.3 with the 5300-09 Technology Level and Service Pack 7,or later
    - IBM i 6.1 with i 6.1.1 machine code, or later
    - IBM i 7.1 or later
    - SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
    - SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
  - Initial Order/MES/Both/Supported: Both
  - CSU: Yes
  - Return parts MES: No
  Note: Assignment to the VIOS requires VIOS 2.1.1.0 or later
(#5877) - 12X I/O Drawer PCIe, No Disk
(No Longer Available as of August 31, 2017)
This feature provides a 4U high I/O drawer containing ten PCIe slots.This drawer attaches to the central electronics complex via 12X DDRcables (#1862, #1864 or #1865).
- Minimum required: 0
- Maximum allowed: 4 (Initial order maximum: 4)
- OS level required:
  - Attributes provided: 12 SAS bays, slot filler panels are provided for empty bays when initially shipped from IBM.
  - Attributes required:
    - Minimum required: 0
    - Maximum allowed: 48 (Initial order maximum: 48)
    - OS level required:
      - Attributes provided: 24 SFF SAS bays, slot filler panels areprovided for empty bays when initially shipped from IBM. #5887rails have some adjustability for depth - 25.25 to 29.875 inches.
      - Attributes required:
        Minimum required: 0
        Maximum allowed: 21 (Initial order maximum: 21)
        OS level required:
        http://drivers.suse.com/driver-process/pub/update/IBM/
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: VIOS support requires VIOS 2.2.0.12-FP24 SP02 or later
        (#5899) - PCIe2 4-port 1GbE Adapter
        (No Longer Available as of August 31, 2017)
        This short PCIe Gen2 adapter provides four 1Gb Ethernet ports that canbe configured to run at 1000, 100 or 10 Mbps. 4-pair CAT-5Unshielded Twisted Pair (UTP) cables up to 100 meters in length areattached to the copper RJ45 connectors. Each port is independent ofone another and supports full-duplex or half-duplex. 1000 Mbps speedis not supported in Half Duplex (HDX) mode.
        Feature #5260 and #5899 are electronically identical and have thesame CCIN of 576F. #5260 indicates a low profile tail stock while#5899 indicates a full high tail stock.
        Details for the ports include:
        Minimum required: 0
        Maximum allowed: 41 (Initial order maximum: 41)
        OS level required:
        http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: VIOS 2.2.1.4 or later
        (#5900) - PCI-X DDR Dual -x4 SAS Adapter
        The PCI-X DDR Dual Connector x4 SAS Adapter is a low-profile shortform factor adapter and is an excellent solution for high-performanceapplications. The Adapter provides two SAS channels (busses). In a wideconfiguration, providing redundant ports to the devices, 1 Gbs throughputis supported. In the non-redundant configuration up to 3 Gbs issupported. The adapter supports RAID level 0 (with mirroring) and 10
        Highlights
        Minimum required: 0
        Maximum allowed: 50 (Initial order maximum: 0)
        OS level required:
        Supports up to 48 SAS disks, when configured with four #5886EXP12S Disk Drawers or two #5887/#EL1S EXP24S Disk Drawers
        Supports up to 42 disk (18 SFF disk plus up to 24 3.5-inch SASdisk) when configured with a #5802/#EL36 19-inch PCIe 12X I/O Drawerand two #5886 EXP 12S Disk Drawers or configured with a #5802/#EL36and one #5887/#EL1S EXP24S
        Supports up to 50 disk (26 SFF disk plus up to 24 3.5-inch SASdisk) when configured with a #5803 24-inch PCIe 12X I/O Drawer and two#5886 EXP 12S Disk Drawers or configured with a #5803 and one#5887/#EL1S EXP24S
        SAS speed = 3 Gbs
        SATA speed = 1.5 Gbs
        SAS Serial SCSI Protocol (SSP), Serial ATA Tunneling Protocol(STP) and Serial Management Protocol (SMP)
        Dual controller supports mirrored RAID parity footprints
        Concurrent firmware update
        Attributes provided: Eight physical links via two mini SAS 4xconnectors
        Attributes required: One PCI Express slot
        For 8233-E8B: (#5901)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: CEC maximum of 3 under AIX, IBM i, or Linux. System maximum of 41under AIX, IBM i, or Linux.
        (#5902) - PCI-X DDR Dual - x4 3Gb SAS RAID Adapter
        The PCI-X DDR Dual - x4 3Gb SAS RAID Adapter is a long form factoradapter and is an excellent solution for high-performance applicationsrequiring two adapters. Two #5902 provides for mirrored write cache dataand mirrored RAID parity footprints between the adapters for superioravailability. With proper cabling, multiple wide ports are used toprovide redundant paths to each dual port SAS disk. The adapter managesSAS path redundancy and path switching should a SAS failure occur. RAIDlevels 0, 5, 6, and 10 are supported. It is used with FC 5886 EXP 12SSAS disk expansion drawers. FC 5902 is always to be in used in a HighAvailability configuration using two adapters.
        Highlights
        Minimum required: 0
        Maximum allowed: 50 (Initial order maximum: 0)
        OS level required:
        Music Man Stingray 5 Hh 5-string Bass
        Feature 5903 supports SAS disk drives (HDD) and SAS-bay-based SSDlocated in a PCIe 12X I/O Drawer or drives located in an EXP 12S DiskDrawer or EXP24S Disk Drawer. AIX/Linux formatted SAS drives can beattached, and RAID 0, RAID 5, RAID 6, and RAID 10 are supported.Similarly, IBM i RAID formatted HDD and SSD can also also be attached,and RAID 5 and RAID 6 is support. AIX, IBM i and Linux also supportThe #5805 is electronically identical to the #5903 and both the 5903and 5805 use CCIN number is 574E. The #5805 adapter is slightly morenarrow than the #5903 due to the placement of its cache batteries.
        With proper cabling and configuration, multiple wide ports are usedto provide redundant paths to each dual port SAS disk or SSD.. Theadapter manages SAS path redundancy and path switching should a SASdrive failure occur. The pairing of #5903 provides a highavailability I/O configuration to protect against the failure of a SASadapter. SAS X cables attach SAS disk drives in an EXP12S and/orEXP24S Disk Drawers. SAS #3688 cables attach SFF SAS drives in anPCIe 12X I/O Drawer. The high availability I/O configurationconnection is provided via the internal wiring within the PCIe 12X I/O drawer itself.
        Limitation: 4k byte sector HDD/SSD are not supported. Only 5xxbyte sector drives are supported on this generation of PCIe adapter.
        Highlights:
        Minimum required: 0
        Maximum allowed: 41 (Initial order maximum: 41)
        OS level required:
        SAS speed = 3Gb/s
        SAS-SSP, SMP are supported
        Supports Single controller with SAS y cables( #3692, #3693, #3694)for #5886 EXP 12S, or with SAS AI cable for Power 520/550 CEC
        Supports Dual controller with SAS x cables (#3661, #3662, #3663) andSAS (AA) cable( #3681 or #3682).
        Built-in auxiliary cache mirrors write cache for redundancy
        Attributes provided: PCI-X DDR 1.5GB Cache SAS RAID Adapter
        Attributes required: two adjacent PCI-X slots, #5922 if singlecontroller, if paired controller use either #3681 or #3682 (AA) cables.
        For 8233-E8B: (#5904)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: CEC and system maximum of 1 under AIX, IBM i, or Linux.
        (#5908) - PCI-X DDR 1.5GB Cache SAS RAID Adapter (BSC)
        (No Longer Available as of July 11, 2014)
        PCI-X DDR 1.5GB Cache SAS RAID Adapter provides disk controller driveor SSD controller function using PCI-X DDR technology, a maximum of 1.5GBcompressed write cache and a maximum 1.6GB compressed read cache.Auxiliary write cache and concurrent battery maintenance are provided.The controller is implemented using two physical cards that are firmlyconnected and requires two adjacent PCI slots. It provides threemini-SAS 4x connectors for the attachment of SAS drives located in a#5886 EXP12S/#5887 EXP24S Expansion Drawers. The controller supports amaximum of five SAS #5886 EXP 12S Expansion Drawers. The controllersupports a maximum of two #5887 EXP24S drawers, but can also support a#5886 I/O drawer in addition to the two #5887 providing a total of 60 SASbays. It supports up to 6 drive slots in one POWER6 560/570/770 CECdrawers and up to three POWER6 560/570/770 drawers in the same server.With proper cabling and configuration, multiple wide ports are used toprovide redundant paths to each dual port SAS disk or SSD. The adaptermanages SAS path redundancy and path switching should a SAS drive failureoccur. CCIN is 572F/575C.
        The adapter provides RAID 0, RAID 5, RAID 6 and RAID 10 for AIX linux.Under IBM i OS, mirroring and data spreading is provided by theoperating system and RAID 5 and RAID6 is provided by the adapter.#5904, #5906 and #5908 are all feature codes representing the samephysical cards, but different feature codes are used to indicate if ablind swap cassette is used and its type. #5908 indicates a Gen-3blind swap cassette used in enclosures such as the 19-inch #5790, 5796or Power 570 CEC.
        With the optional pairing of adapters, an even higher level ofprotection beyond, auxiliary cache is provided via a dual controller I/Oconfiguration to protect against the failure of an entire adapter. Insuch a high availability I/O configuration, SAS X cables are used toattach #5886 EXP 12S/#5887 EXP24S Expansion Drawers and the 4th mini-SASconnector (top) is used with an adapter to adapter (AA) SAS CABLE, (3M#3681, 6M #3682), to directly connect the card sets. Paired adaptersmust reside on the same server/partition for IBM i, but can be in thesame or separate servers/partitions for AIX/Linux.
        Highlights
        Minimum required: 0
        Maximum allowed: 16 (Initial order maximum: 16)
        OS level required:
        Supports up to 48 SAS disks, when configured with four FC 5886 12Sdisk expansion drawers
        Removable Media Device Supported
        SAS speed = 3Gbs
        SATA speed = 1.5Gbs
        SAS Serial SCSI Protocol (SSP) , Serial ATA Tunneling Protocol (STP)and Serial Management Protocol (SMP)
        RAID 0 and 10
        Dual controller supports mirrored RAID parity footprints
        Concurrent Firmware Update
        Attributes provided: Eight physical links via two mini SAS 4xconnectors
        Attributes required: One PCI-X 2.0 DDR slot
        For 8233-E8B: (#5912)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: Does not apply
        Note: Maximum of 2 allowed in CEC under AIX, IBM i, or Linux. Systemmaximum of 50 under AIX or Linux; 36 under IBM i.
        (#5913) - PCIe2 1.8 GB Cache RAID SAS Adapter Tri-port 6 Gb
        (No Longer Available as of December 31, 2016)
        The PCIe2 1.8 GB Cache RAID SAS Adapter Tri-port 6 Gb (#5913)provides high performance HDD or SSD controller function using PCIeGen2 technology. HDD and SSD can be either SFF or 3.5-inch drives (orboth). A pair of adapters are required to provide mirrored writecache data and adapter redundancy. Integrated flash memory providesprotection of the write cache without batteries in case of powerfailure.
        The #5913 provides three Mini-SAS HD (high density) connectors forthe attachment of SAS drives located in the #5887/EL1S EXP24S, #5886EPX12S, or #5802/5803/EL36 12X PCIe I/O drawers. X, YO or AT SAScables with HD connectors are used to attach to these drawers. A maxof 3 EXP24S or 6 EXP12S can be attached. If controlling drives in a#5802/5803/EL36 the #5913 pairs must be located in that #5802/5803/EL36. An AA SAS cable with HD connectors is attached to the#5913 pair to communicate status and cache content information and isrequired unless all three ports are being used to attach I/O drawers.
        The #5913 provides RAID 0, RAID 5, RAID 6 and RAID 10 for AIX andLinux and VIOS. The adapter provides RAID 5 and RAID 6 for IBM i. IBMi provides both OS mirroring and data spreading. AIX/Linux/VIOSprovide OS mirroring (LVM). The adapter's CCIN is 57B5.
        Limitation: 4k byte sector HDD/SSD are not supported. Only 5xxbyte sector drives are supported on this generation of PCIe adapter
        Minimum required: 0
        Maximum allowed: 32 (Initial order maximum: 32)
        OS level required:
        http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/info/LinuxAlerts.html
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note:
        Attributes provided: high speed connection between two #5913 SASadapters
        Attributes required: available top connectors on pair of #5913 SASadapters
        For 8233-E8B: (#5915)
        Attributes provided: high speed connection between two #5913 SASadapters
        Attributes required: available top connectors on pair of #5913 SASadapters
        For 8233-E8B: (#5916)
        Attributes provided: high speed connection between two #5913 SASadapters
        Attributes required: available top connectors on pair of #5913 SASadapters
        For 8233-E8B: (#5917)
        Attributes provided: high speed connection between two #5913 SASadapters
        Attributes required: available top connectors on pair of #5913 SASadapters
        For 8233-E8B: (#5918)
        Attributes provided: SAS RAID adapter firmware disables write cacheuntil a second SAS RAID adapter is recognized.
        Attributes required: Every #5922 requires a SAS RAID adapter on boththis server and on another server that will pair up the SAS RAID adapterand enable the onboard caches to function.
        For 8233-E8B: (#5922)
        Attributes provided: SAS RAID adapter firmware disables write cacheuntil a second SAS RAID adapter is recognized.
        Attributes required: Every #5923 requires a SAS RAID adapter (#5903)on both this server and on another server that will pair up the SAS RAIDadapter and enable the onboard caches to function.
        For 8233-E8B: (#5923)
        Attributes provided: SAS RAID adapter firmware disables write cacheuntil a second SAS RAID adapter is recognized.
        Attributes required: Every #5924 requires a 6Gb/s SAS RAID adapter(#5913) on both this server and on another server that will pair up theSAS RAID adapter and enable the onboard caches to function.
        For 8233-E8B: (#5924)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5951)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5952)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5953)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5954)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5955)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5956)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5957)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5958)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5959)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5960)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5961)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5962)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5964)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5965)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5966)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5967)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5968)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5969)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5970)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5971)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5972)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5973)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5974)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5975)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5976)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5977)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5978)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5979)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5980)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5981)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5982)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#5983)
        Attributes provided: 2M power control cable
        Attributes required: I/O drawer
        For 8233-E8B: (#6001)
        Attributes provided: 3M power control cable.
        Attributes required: two drawers in the same rack.
        For 8233-E8B: (#6006)
        Attributes provided: 15M power control cable.
        Attributes required: I/O drawer
        For 8233-E8B: (#6007)
        Attributes provided: 6M power control cable
        Attributes required: I/O drawer
        For 8233-E8B: (#6008)
        Attributes provided: 30M power control cable.
        Attributes required: two drawers in the same rack.
        For 8233-E8B: (#6029)
        Attributes provided: Front Door
        Attributes required: #0551 19 inch 1.8m Rack
        For 8233-E8B: (#6068)
        Attributes provided: Front Door
        Attributes required: #0553 19 inch 2.0 meter Rack
        For 8233-E8B: (#6069)
        Attributes provided: Acoustic Door Kit
        Attributes required: #0551 19 inch 1.8m Rack
        For 8233-E8B: (#6248)
        Attributes provided: Acoustic Door Kit
        Attributes required: #0553 19 inch 2.0 meter Rack
        For 8233-E8B: (#6249)
        Attributes provided: Decorative trim kit
        Attributes required: #0551 19 inch 1.8m Rack
        For 8233-E8B: (#6263)
        Attributes provided: Decorative trim kit
        Attributes required: #0553 19 inch 2.0 meter Rack
        For 8233-E8B: (#6272)
        Attributes provided: 12X Channel Interface Connection
        Attributes required: none
        For 8233-E8B: (#6446)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6457) - Dual-port 12X Channel Attach- Long Run
        (No Longer Available as of July 27, 2012)
        This Adapter is the interface for attachment of the I/O Drawer to a12X Channel loop. The adapter includes two 12X channel connectors tosupport attachment of the drawer into the loop. This adapter includesthe repeater function and can support longer cable loops allowing drawersto be located in adjacent racks. 12X Cables up to 8 Meters in length canbe attached to this adapter. The required 12X Cables are ordered under aseparate feature number.
        Minimum required: 0
        Maximum allowed: 8 (Initial order maximum: 8)
        OS level required:
        Attributes provided: Power cable
        Attributes required: None
        For 8233-E8B: (#6458)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6460)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6469)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6470)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6471)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6472)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6473)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6474)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6475)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6476)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6477)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6478)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6479)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6487)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#6488)
        Attributes provided: power cord
        Attributes required: None
        For 8233-E8B: (#6489)
        Attributes provided: power cord
        Attributes required: None
        For 8233-E8B: (#6491)
        Attributes provided: power cord
        Attributes required: None
        For 8233-E8B: (#6492)
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6494) - Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 10A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #69 (IS 6538). Refer to Corporate BulletinC-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6494 power cord to power the system and/orperipheral features requiring a power cord: India
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6495) - Power Cord (9-foot), To Wall/OEM PDU, (250V, 10A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #73. Refer to Corporate BulletinC-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6495 power cord to power the system and/orperipheral features requiring a power cord: Brazil
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: No
        (#6496) - Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 10A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #66 (KETI). Refer to Corporate BulletinC-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6496 power cord to power the system and/orperipheral features requiring a power cord: North Korea South Korea
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6497) - Power Cord (6-foot), To Wall/OEM PDU, (250V, 10A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #10 (NEMA L6-15). Refer to CorporateBulletin C-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6497 power cord to power the system and/orperipheral features requiring a power cord. Canada Colombia Japan MexicoUnited States
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#6498) - Power Cord (6-foot), To Wall/OEM PDU, (250V, 15A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #34 (RS 3720U-2). Refer to CorporateBulletin C-B-2-43700-009 for a description of plug types. The followingcountries/regions use the #6498 power cord to power the system and/orperipheral features requiring a power cord: Canada Japan United States
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#6577) - Power Cable - Drawer to IBM PDU, 200-240V/10A
        This feature permits manufacturing to select the optimum PDU cablelength (1.5M, 2.7M or 4.2M) for rack integration. This feature ismandatory on initial order with 7014-T00 or T42 racks. Feature is notvalid on initial order with non-factory integrated feature 4650.
        Minimum required: 0
        Maximum allowed: 114 (Initial order maximum: 114)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: 1 or 2 per I/O drawer or CEC. MES orderable for SDI's only. TheMES order will ship the 14 foot cable equivalent to feature number 6458.
        (#6580) - Optional Rack Security Kit
        This feature provides hardware that can be added to a rack to preventunauthorized access.It includes keyed front and rear locks for the #0551 and #0553rack doors.It also includes two sliding bars that mount insidethe left and right rack side panels. The sliding bars are accessiblewhen the rack rear door is open. They can be moved to a position thatdisables the external latches on the rack side panels, and preventsremoval of the side panels.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#6586) - Modem Tray for 19-Inch Rack
        (No Longer Available as of December 29, 2017)
        This feature provides hardware for installing one or two modems in a19-inch rack. The modem tray occupies 1U of rack space when it ismounted in the front of the rack. It provides a secure location in therack for external modems such as the ones attached to the HardwareManagement Console.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#6651) - Power Cord 2.7M (9-foot), To Wall/OEM PDU, (125V, 15A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #75 (KETI). Refer to Corporate BulletinC-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6651 power cord to power the system and/orperipheral features requiring a power cord: Taiwan
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: 250)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6654) - 4.3m (14-Ft) 1PH/24-30A Pwr Cord
        #6654 is a 14-FT/4.3m 200-240V/24A locking power cord with a Type 12plug which distributes power from a power source to a Power DistributionUnit.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#6655) - 4.3m (14-Ft) 1PH/24-30A WR Pwr Cord
        #6655 is a 14-FT/4.3m 200-240V/24A water-resistant power cord with aType 40 plug which distributes power from a power source to a PowerDistribution Unit.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#6656) - 4.3m (14-Ft)1PH/24A Power Cord
        #6656 is a 14-FT/4.3m 200-240V/24A power cord with a Type 46 plugwhich distributes power from a power source to a Power Distribution Unit.
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#6659) - Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 15A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #76 (KETI). Refer to Corporate BulletinC-B-2-4700-009 for a description of plug types. The followingcountries/regions use the #6659 power cord to power the system and/orperipheral features requiring a power cord: Taiwan
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6660) - Power Cord (14-foot), Drawer To OEM PDU (125V, 15A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #59 (NEMA 5-15). Refer to CorporateBulletin C-B-2-4700-009 for a description of plug types. 14-foot length.This power cord meets the DENAN marking requirement in Japan.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6665) - Power Cord 3 M (10 ft), Drawer to IBM PDU, 250V/10A
        Standard IBM rack power cable that goes from the system or I/O drawerto the rack power distribution unit (PDU). 3 M (10-foot) length. Usethis cord with PDUs that have IEC320/C19 connectors.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 2)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6669) - Power Cord 4.3M (14-foot), Drawer to OEM PDU, (250V, 15A)
        This power cord goes from the system or I/O drawer to the rack powerdistribution unit. Plug type #57 (NEMA 6-15). Refer to CorporateBulletin C-B-2-4700-009 for a description of plug types. 14-foot length.This power cord meets the DENAN marking requirement in Japan.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6670) - Power Cord (6-foot), To Wall (125V, 15A),
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #59 (NEMA 5-15). Refer to CorporateBulletin C-B-2-4700-009 for a description of plug types. 6-foot length.This power cord meets the DENAN marking requirement in Japan.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: No
        (#6671) - Power Cord 2.7M (9-foot), Drawer to IBM PDU, 250V/10A
        Standard IBM rack power cable that goes from the system or I/O drawerto the rack power distribution unit (PDU). 9-foot length.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6672) - Power Cord 2M (6.5-foot), Drawer to IBM PDU, 250V/10A
        Standard rack power cable that goes from the system or I/O drawer tothe rack power distribution unit (PDU). 6.5-foot length.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6680) - Power Cord 2.7M (9-foot), To Wall/OEM PDU, (250V, 10A)
        This insulated power cord goes from the system and/or peripheralfeatures to a wall-type outlet. Plug type #6 (AS 3112-1964 NZS 198).Refer to Corporate Bulletin C-B-2-4700-009 for a description of plugtypes. The following countries/regions use the #6680 power cord to powerthe system and/or peripheral features requiring a power cord: AustraliaFiji Islands Kiribati Nauru New Zealand Papua New Guinea W. Samoa
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#6687) - Power Cord (6-foot), To Wall, (250V, 15A)
        This power cord goes from the system and/or peripheral features to awall-type outlet. Plug type #57 (NEMA 6-15). Refer to CorporateBulletin C-B-2-4700-009 for a description of plug types. 6-foot length.This power cord meets the DENAN marking requirement in Japan.
        Minimum required: 0
        Maximum allowed: No max (Initial order maximum: No max)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: No
        (#6805) - PCI 2-Line WAN IOA No IOP
        Feature #6805 is a 2 RVX port WAN IOA that supports multiple protocolson Asynchronous and Synchronous Mode connections
        On the IBM i Operating system, the #6805 may be used either with orwithout an IOP.
        When under an IOP, #6805 supports PPP (Point to Point Protocol), ASC(Async), and Fax protocols on an Asynchronous Connection, and PPP, BSC(Bisync), SDLC , X.25, and FR (Frame Relay) protocols on a SynchronousConnection
        When the #6805 is IOPless, it supports PPP, ASC, and Fax protocols onan Asynchronous Connection, but only supports Synchronous PPP, and BSC(Bisync) protocols on a Synchronous Connection.
        The #6805 supports SNA only if configured with an IOP. If SNA isrequired in an IOPless environment, IBM i Enterprise Extender supportsSNA over a LAN Connection and encapsulates the SNA frame within a TCP/IPframe.
        The following self-configuring cables provide the physical connectionsto #6805:
        #0348 V.24/EIA232 20-Ft PCI Cable
        #0349 V.24/EIA232 50-Ft PCI Cable (support only, not orderable)
        #0365 V.24/EIA232 80-Ft PCI Cable (support only, not orderable)
        #6805 does not support remote power-on.
        IOPs are not supported on POWER7 systems.
        Minimum required: 0
        Maximum allowed: 50 (Initial order maximum: 0)
        O/S Level Required:
        #1010 Modem Cable - Austria
        #1011 Modem Cable - Belgium
        #1012 Modem Cable - Africa
        #1013 Modem Cable - Israel (supported only, not orderable)
        #1014 Modem Cable - Italy
        #1015 Modem Cable - France
        #1016 Modem Cable - Germany
        #1017 Modem Cable - UK
        #1018 Modem Cable - Iceland/Sweden
        #1020 Modem Cable - HK/NZ
        #1021 Modem Cable - Fin/Nor
        #1022 Modem Cable - Netherlands
        #1023 Modem Cable - Swiss
        #1024 Modem Cable - Denmark
        #1025 Modem Cable - US/Canada
        Attributes provided: four WAN ports
        Attributes required: one PCI slot
        For 8233-E8B: (#6808)
        No AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: CEC maximum of 2 under IBM i or LInux. System maximum of 50 underLinux; 41 under IBM i. Not supported under AIX.
        (#6833) - PCI 2-Line WAN w/Modem NoIOP
        The #6833 is a 2-line/port WAN w/modem adapter. This feature is thenon-CIM (Complex Impedance Matching) version offered in all countriesexcept Australia and New Zealand.
        Port 0 is the modem port and supports V.92 56K Async PPP, V.92 datamodem, V.44 data compression, V.34 FAX modem and FAX functions, such asECM and 2D/1D conversion. Port 0 does not provide Sync modemcapabilities (SDLC and Sync PPP).
        Port 1 is the RVX port and supports multiple communications protocols,including synchronous operations.
        Select one of the following cables to attach to port 0(modem port):
        #0348 - V.24/EIA232 20-Ft PCI Cable
        #0353 - V.35 20-Ft PCI Cable
        #0356 - V.36 20-Ft PCI Cable (supported only, not orderable)
        #0359 - X.21 20-Ft PCI Cable
        #0367 - Operations Console PCI Cable (ships with a 25 pin to 9 pinadapter)
        #0348 - V.24/EIA232 20-Ft PCI Cable
        The #6833 does not support the remote ring indicate function.
        #6833 does not support SNA communications except through IBM i V5R4Enterprise Extender function.
        Minimum required: 0
        Maximum allowed: 50 (Initial order maximum: 0)
        OS level required:
        Attributes provided: Twelve C13 outlets with Power MonitoringCapability
        Attributes required: none
        For 8233-E8B: (#7109)
        Attributes provided: Monitoring of temperature, humidity, and statusof two contacts/ sensors. A one meter cat5 Ethernet cable, double sidedhook and loop fabric, often called VELCRO(R) tape, two tie-wraps, andscrew with wall anchor for mounting.
        Attributes required: None
        For 8233-E8B: (#7118)
        One of the following line cords must be used to distribute power froma wall outlet to the #7188;
        Minimum required: 0
        Maximum allowed: No Max (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#7204) - Quantity 150 of #2124
        Ships a quantity of 150 #2124 1m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7205) - Quantity 150 of #2125
        Ships a quantity of 150 #2125 3m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7206) - Quantity 150 of #2126
        Ships a quantity of 150 #2126 5m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7207) - Quantity 150 of #2127
        Ships a quantity of 150 #2127 10m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7208) - Quantity 150 of #2128
        Ships a quantity of 150 #2128 20m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7213) - Quantity 150 of #2138
        Ships a quantity of 150 #2138 0.55m SCSI Cables. The configurator mayeither generate this feature or allow users to select this feature asthey would any other single SCSI cable feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7305) - SDI Software Pre-Install Indicator
        (No Longer Available as of January 3, 2014)
        Software pre-install indicator for SDI
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#7307) - Dual I/O Unit Enclosure
        (No Longer Available as of November 26, 2010)
        The #7307 enclosure provides the mounting hardware, with adjustablerails, required to install a #5790 I/O drawer in a #0551, #0553, #0554,or #0555 rack. The enclosure can accommodate two #5790 drawers, side byside, but it may also be used with only one #5790 drawer installed.
        The #7307 and #7311 are functionally equivalent except the #7307 canbe used in the #0554 and #0555 racks and has rails adjustable to 29.25inches depth.
        Minimum required: 0
        Maximum allowed: 24 (Initial order maximum: 24)
        OS level required:
        Attributes required: 4 EIA of space in a 19 inch-rack.
        For 8233-E8B: (#7314)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7509) - Quantity 150 of #4327
        This feature ships a quantity of 150 #4327 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required:
        Attributes provided: see feature #4328
        Attributes required: See feature #4328
        For 8233-E8B: (#7510)
        No AIX support
        No Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7511) - Quantity 150 of #4329
        Ships a quantity of 150 #4329 280.25GB disk units. The configuratormay either generate this feature or allow users to select this feature asthey would any other single disk unit feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required:
        Attributes provided: see feature #3676
        Attributes required: see feature #3676
        For 8233-E8B: (#7517)
        No AIX support
        No Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#7518) - Quantity 150 of #3677
        (No Longer Available as of February 8, 2013)
        This feature ships a quantity of 150 #3677 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required:
        Attributes provided: see feature #3678
        Attributes required: see feature #3678
        For 8233-E8B: (#7519)
        No AIX support
        No Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7535) - Quantity 150 of #3586
        (No Longer Available as of July 29, 2011)
        Ships a quantity 150 of #3586, 69GB 3.5' SAS Solid State Drive
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 2)
        OS level required:
        Attributes provided: See feature #3587
        Attributes required: See feature #3587
        For 8233-E8B: (#7536)
        No AIX support
        No Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7538) - Quantity 150 of #3658
        (No Longer Available as of February 8, 2013)
        This feature ships a quantity of 150 #3658 (428 GB SAS) disk units.The configurator may either generate this feature or allow users toselect this feature as they would any other single disk unit feature.This feature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 3)
        OS level required:
        Attributes provided: 150 of #3647 for every #7549
        Attributes required: Available 3.5-inch SAS disk bay
        For 8233-E8B: (#7549)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        No IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7550) - Quantity 150 of #1790
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #1790 disk units. Theconfiguratormay either generate this feature or allow users to select this feature asthey would any other single disk unit feature. This feature remains onthe inventory records.
        Minimum required: 0
        Maximum allowed: 0 (Initial order maximum: 0)
        OS level required:
        Attributes provided: 150 #3648 for each #7564
        Attributes required: Available 3.5-inch SAS disk bays
        For 8233-E8B: (#7564)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        No IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7565) - Quantity 150 of #3649
        (No Longer Available as of February 8, 2013)
        Quantity 150 of #3649 450GB 15K RPM SAS Disk Drive.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 3)
        OS level required:
        Attributes provided: 1700 Watt DC Power Supply
        Attributes required: Available Power Supply Bay
        For 8233-E8B: (#7708)
        AIX Version 7.1, or later
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 5.3 with the 5300-12 Technology Level and Service Pack 2,or later
        AIX Version 5.3 with the 5300-11 Technology Level and Service Pack 5,or later
        AIX Version 5.3 with the 5300-10 Technology Level and Service Pack 5,or later
        AIX Version 6.1 with the 6100-05 Technology Level and Service Pack 3,or later
        AIX Version 6.1 with the 6100-04 Technology Level and Service Pack 7,or later
        AIX Version 6.1 with the 6100-03 Technology Level and Service Pack 7,or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        IBM i 7.1, or later
        SUSE Linux Enterprise Server 11 Service Pack 1, or later
        SUSE Linux Enterprise Server 10 Service Pack 3, or later
        Red Hat Enterprise Linux Version 5.5 for POWER, or later.
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#7714) - One Processor Activation for Processor Feature #8334
        (No Longer Available as of October 31, 2017)
        This feature will activate one processor on a #8334 processor card.
        Minimum required: 0
        Maximum allowed: 32 (Initial order maximum: 32)
        OS level required:
        Attributes provided: Activation of processor for #8332
        Attributes required: Feature number 8332
        For 8233-E8B: (#7715)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7716) - One Processor Activation for Processor Feature #8336
        (No Longer Available as of October 31, 2017)
        This feature will activate one processor on a #8336 processor card.
        Minimum required: 0
        Maximum allowed: 32 (Initial order maximum: 32)
        OS level required:
        Attributes provided: Activation of processor for #8335
        Attributes required: Feature number 8335
        For 8233-E8B: (#7717)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#7740) - Power Supply, 1725 Watt AC, Hot-swap, Base or Redundant
        (No Longer Available as of January 3, 2014)
        This feature provides an 1725 Watt AC power supply, either as theprimary power supply in the system, or the secondary power supply forredundant power. A power cord must be ordered for each power supplyordered. The two power supplies dock directly to the system board.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 2)
        OS level required:
        Attributes provided: Hardware and trim to attach two racks
        Attributes required: #0553 rack
        For 8233-E8B: (#7780)
        Attributes provided: Capability to partition processor
        Attributes required: None
        For 8233-E8B: (#7793)
        Attributes provided: Capability to partition processor
        Attributes required: None
        For 8233-E8B: (#7794)
        Attributes provided: Capability to partition processor
        Attributes required: None
        For 8233-E8B: (#7795)
        Attributes provided: 6M Ethernet Cable
        Attributes required: Ethernet port on Hardware Management Console
        For 8233-E8B: (#7801)
        Attributes provided: 15M Ethernet Cable
        Attributes required: Ethernet port on Hardware Management Console
        For 8233-E8B: (#7802)
        Attributes provided: Hardware and trim to attach two racks
        Attributes required: #0551 rack
        For 8233-E8B: (#7840)
        Attributes provided: Rear brace, bolt down hardware, bolt infrontfiller panels
        Attributes required: #0551 19 inch 1.8m Rack or #0553 19 inch2.0MRack
        For 8233-E8B: (#7841)
        Attributes provided: Blind swap PCI cassette
        Attributes required: none
        For 8233-E8B: (#7863)
        Attributes provided: Linux preinstall
        Attributes required: None
        For 8233-E8B: (#8143)
        No AIX support
        Red Hat Enterprise Linux 5.5 for POWER
        Refer to Software Requirements for Linux support
        No IBM i support
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#8144) - Linux Software Preinstall (Business Partners)
        (No Longer Available as of January 3, 2014)
        This feature indicates that the Linux operating system is to bepreinstalled on the system. #8144 is a prerequisite for preinstall #5005or #7305. This feature is only available to IBM Business Partner -Solution Providers and IBM Business Partner - Systems Integrators.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: 8-core processor card
        Attributes required: One processor card slot
        For 8233-E8B: (#8332)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#8334) - 8-core 3.0 GHz POWER7 Processor Card
        (No Longer Available as of August 31, 2017)
        8-core 3.0 GHz POWER7 processor card. There are 8 DDR3 DIMM slots onthe processor card.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 0)
        OS level required:
        Attributes provided: 6-core processor card
        Attributes required: One processor card slot
        For 8233-E8B: (#8335)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#8336) - 8-core 3.55 GHz POWER7 Processor Card
        (No Longer Available as of August 31, 2017)
        8-core 3.55 GHz POWER7 processor card. There are 8 DDR3 DIMM slots onthe processor card.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 0)
        OS level required:
        (No Longer Available as of January 3, 2014)
        This feature code provides a high function and high availability8x2.5' SFF (Small Form Factor) DASD backplane with an external SAS port.The external SAS port on this feature supports a single feature 5886drawer attachment (with cable #3674 on the 8203-E4A and cable #3668 onthe 8204-E8A/8233-E8B/8236-E8C) and supports disk units within the CEC tobe split into two distinct 4-disk groups (with cable #3670 on the8203-E4A and cable #3669 on the 8204-E8A/ 8233-E8B). Supports connectionfor a slim SATA DVD-ROM or DVD-RAM and a 5.25 inch half high tape drive.
        IBM i does not support split backplane option.
        Minimum required: 1
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: 3-Button USB Mouse
        Attributes required: Keyboard with USB Mouse Attachment Port
        For 8233-E8B: (#8841)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        No IBM i support
        Initial Order/MES/Both/Supported: Supported
        CSU: Yes
        Return parts MES: Does not apply
        (#8845) - USB Mouse
        (No Longer Available as of October 31, 2017)
        The optical LED USB Mouse has 2 buttons and a scroll wheel that actsas a third button. Mouse cable is 1.8 meters long. OS does not supportscrolling with the wheel. Business black with red scroll wheel.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9169)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9300)
        Attributes provided: IOA configuration for Mode 1
        Attributes required:One YO cable (#3691 1.5M, #3692 3M, #3693 6M, #3694 15M) and oneport on a #5901/#5278
        For 8233-E8B: (#9359)
        Attributes provided: IOA configurations for Mode 1 with two (#5901#5278)
        Attributes required:Two YO cables (#3691 1.5M, #3692 3M, #3693 6M, #3694 15M) and oneport on each of two #5901/#5278s
        For 8233-E8B: (#9360)
        Attributes provided: Designated IOA configurations for Mode 2
        Attributes required:Two YO cables (#3691 1.5M, #3692 3M, #3693 6M, #3694 15M) and oneport on each of two #5901/#5278s
        For 8233-E8B: (#9361)
        Attributes provided: IOA configurations for Mode 4
        Attributes required:Two dual X cables (#3661 1.5M, #3662 3M, #3663 15M) and four#5901/#5278s dedicated to the single #5887
        For 8233-E8B: (#9365)
        Attributes provided: IOA configurations for Mode 2
        Attributes required:Two dual X cables (#3661 1.5M, #3662 3M, #3663 15M) and four#5901/#5278s dedicated to the single #5887
        For 8233-E8B: (#9366)
        Minimum required: 0
        Maximum allowed: 21 (Initial order maximum: 21)
        OS level required: n/a
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#9368) - Specify mode-2 1(4)5903/5805 for EXP24S #5887
        Feature indicates that EXP24S SFF Gen2-bay Drawer (#5887) will beconfigured by IBM Manufacturing in Mode 2 (two sets of 12 drive bays)with two pair of PCIe 3G SAS RAID controller (either pair #5903 or 5805or combination of both) utilizing two appropriate X cable connecting tothe I/O Adapters (IOA). IBM does not provide changes to the mode settingafter #5887 is shipped.
        Supported by AIX and Linux.
        Minimum required: 0
        Maximum allowed: 21 (Initial order maximum: 21)
        OS level required:
        Attributes provided: IOA configuration for Mode 1
        Attributes required:One YO cable (#3691 1.5M, #3692 3M, #3693 6M, #3694 15M) and oneport on a #5904/#5906/#5908. Limit of 2 x #9382 per #5904/#5906/#5908
        For 8233-E8B: (#9382)
        Attributes provided: IOA configuration for Mode 1
        Attributes required:Two YO cables (#3691 1.5M, #3692 3M, #3693 6M, #3694 15M) and oneport on each of two #5904/#5906/#5908s. Limit of 2 x #9383 per#5904/#5906/#5908 (paired adapters)
        For 8233-E8B: (#9383)
        Attributes provided: Internal SAS port configuration for Mode 1
        Attributes required:One internal CEC SAS port and One YI cable (#3686 1.5m or #3687 3m)
        For 8233-E8B: (#9384)
        Attributes provided: Configuration #5887 Mode 1 with two #5913adapters
        Attributes required: Two YO cables (#3450 1.5M, #3451 3M, #3452 6M,#3453 10M) and one port on each of two #5913s. If fewer than 3 ports oneach of the #5913s are used, an AA cable (#5915 3M, #5916 6M, #5917 1.5M,#5918 0.6M) is required to connect the pair of #5913s
        For 8233-E8B: (#9385)
        AIX - supported
        IBM i - supported
        Linux - supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#9386) - Specify mode-2 1(4) 5913 for EXP24S #5887
        Specify feature 9386 (Specify mode-2 1(4 )5913 for EXP24S #5887)directs manufacturing to configure SFF drawer to mode 2 (two sets of 12SFF bays) and four PCIe2 1.8GB Cache RAID SAS Adapter Tri-port 6Gb.Select #5913 and two appropriate length X cable (#3454 3m, #3456 10m).Include AIX, or Linux and select two AA cables (3M #3681 or 6M #3682)between paired SAS adapters. IBM does not provide changes to the modesetting after #5887 is shipped.
        Supported by AIX and Linux.
        Minimum required: 0
        Maximum allowed: 21 (Initial order maximum: 21)
        OS level required:
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9440)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9441)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9442)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9443)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9444)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9445)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9446)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9447)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9461)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9462)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9463)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9464)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9465)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9466)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#9666)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        No IBM i support
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9700) - Language Group Specify - Dutch
        (No Longer Available as of January 3, 2014)
        Dutch language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9703) - Language Group Specify - French
        (No Longer Available as of January 3, 2014)
        French language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9704) - Language Group Specify - German
        (No Longer Available as of January 3, 2014)
        German language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9705) - Language Group Specify - Polish
        (No Longer Available as of January 3, 2014)
        Polish language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9706) - Language Group Specify - Norwegian
        (No Longer Available as of January 3, 2014)
        Norwegian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9707) - Language Group Specify - Portuguese
        (No Longer Available as of January 3, 2014)
        Portuguese language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9708) - Language Group Specify - Spanish
        (No Longer Available as of January 3, 2014)
        Spanish language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9711) - Language Group Specify - Italian
        (No Longer Available as of January 3, 2014)
        Italian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9712) - Language Group Specify - Canadian French
        (No Longer Available as of January 3, 2014)
        Canadian French language group for Nomenclature and StandardPublications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9714) - Language Group Specify - Japanese
        (No Longer Available as of January 3, 2014)
        Japanese language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9715) - Language Group Specify - Traditional Chinese (Taiwan)
        (No Longer Available as of January 3, 2014)
        Traditional Chinese language group for Nomenclature and StandardPublications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9716) - Language Group Specify - Korean
        (No Longer Available as of January 3, 2014)
        Korean language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9718) - Language Group Specify - Turkish
        (No Longer Available as of January 3, 2014)
        Turkish language group for nomenclature and publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9719) - Language Group Specify - Hungarian
        (No Longer Available as of January 3, 2014)
        Hungarian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9720) - Language Group Specify - Slovakian
        (No Longer Available as of January 3, 2014)
        Slovakian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9721) - Language Group Specify - Russian
        (No Longer Available as of January 3, 2014)
        Russian language group for nomenclature and standard publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9722) - Language Group Specify - Simplified Chinese (PRC)
        (No Longer Available as of January 3, 2014)
        Simplified Chinese language group for nomenclature and standardpublications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9724) - Language Group Specify - Czech
        (No Longer Available as of January 3, 2014)
        Czech language group for nomenclature and standard publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9725) - Language Group Specify -- Romanian
        (No Longer Available as of January 3, 2014)
        Romanian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9726) - Language Group Specify - Croatian
        (No Longer Available as of January 3, 2014)
        Croatian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9727) - Language Group Specify -- Slovenian
        (No Longer Available as of January 3, 2014)
        Slovenian language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9728) - Language Group Specify - Brazilian Portuguese
        (No Longer Available as of January 3, 2014)
        Brazilian Portuguese language group for Nomenclature and StandardPublications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#9729) - Language Group Specify - Thai
        (No Longer Available as of January 3, 2014)
        Thai language group for Nomenclature and Standard Publications.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#EB72) - IBM i 7.2 Indicator
        This feature is used to indicate the correct level of code when IBMi is specified.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 250)
        OS level required:
        Attributes provided: IBM i 7.3 Indicator
        Attributes required: IBM i operating system
        For 8233-E8B: (#EB73)
        IBM i 7.3 supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: Does not apply
        (#EC01) - Rack Front Door (Black)
        This feature provides a front door in flat black color with an IBMlogo for the 7953-94X rack. A front door such as #EC01 is required onthe 7953-94X. The door is the full width of the rack and the hingesand lockplate can be moved from side to side allowing the door to beopened on the left or on the right. IBM ships rack with the handle onthe right and hinges on the left viewed facing the front of the rack.The door comes with a lock which is keyed the same as the rear door orside panels. Uniquely keyed locks can be obtained by the clientdirectly from Southco, the vendor from whom IBM purchased the lock.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EC02) - Rack Rear Door
        This feature provides a rear door in flat black color for the7953-94X rack. Either feature number EC02 or feature EC05 is requiredon the 7953-94X. The door is the full width of the rack and thehinges and lockplate can be moved from side to side allowing the doorto be opened on the left or on the right. IBM ships rack with thehandle on the right and hinges on the left viewed facing the rear ofthe rack. The front doors , rear doors and side panels come with alock which is keyed the same as the front door or side panels.Uniquely keyed locks can be obtained by the client directly fromSouthco, the vendor from whom IBM purchased the lock.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EC03) - Rack Side Cover
        This feature provides two side panels in black color for the7953-94X rack. Each side panel can cover either the left or the rightside of the rack. These side covers are optional but recommended foroptimal airflow through a rack and for physical security. The frontdoor, rear doors and side panels come with a lock which is keyed thesame as the front door or side panels. Uniquely keyed locks can beobtained by the client directly from Southco, the vendor from whom IBMpurchased the lock.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EC04) - Rack Suite Attachment Kit
        This feature provides the attachment hardware to allow two IBMPureFlex System 42U Racks with or without side panels to be boltedtogether in a continuous suite. Order one EC04 feature for each 42Urack attached to the starting rack. For example, in a three-racksuite, order two EC04 features. When multiple racks are joined inthis way without internal side panels, cables can be more easily runbetween racks without having to exit the continuous rack enclosure.With the side panels installed optimum thermal efficiencies aregained. If the optional rear door heat exchanger is chosen, sidepanels must remain on racks in the suite. Side panels should be usedon the leftmost and rightmost racks of the suite.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EC15) - Rear Door Heat Exchanger for 2.0 Meter Slim Rack
        This feature indicates that the rear door heat exchanger (1164-95X)is ordered for the 7953-94Y rack. Either feature EC02 or feature EC05is required on the 7953-94Y.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#ECB0) - 0.6m (2.0-ft), Blue CAT5 Ethernet Cable
        This 0.6M Cat5e cables is used with ports/transceivers that haveRJ-45 connectors.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 250)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ECB2) - 1.5m (4.9-ft), Blue CAT5 Ethernet Cable
        This cable connects the Flex System Enterprise Chassis to managedPDUs and the IBM Storwize V7000 Disk System.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 250)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ECSM) -Custom Service Specify, Mexico
        Having #ECSM on the order, will cause the order to be routed toMexico and the machine to be internally routed to the CSC build area.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ECW0) - Optical Wrap Plug
        A wrap plug is a small connector designed to perform a diagnostictest called a loopback test. This wrap plug is inserted into a SRoptical port on a PCIe Fibre Channel adapter or a SR or LR opticalport on a PCIe Ethernet adapter
        This is a multi-mode LC fiber optic wrap plug with an inside/outside optics diameter of 50/125. Its IBM part number as of early2016 is 12R9314. An earlier equivalent function IBM part number whichis no longer shipped is 11P3847.
        It is strongly recommended that Fibre Channel adapters (HBAs) fillany empty adapter ports with a wrap plug. There is no technical issueleaving a port empty. However, filling all ports with a cable to adevice/switch or with a wrap plug can speed the booting/IPLing of apartition and can avoid error messages uselessly pointing to a plannedempty port.
        There is no technical issue leaving an Ethernet port empty.Whether an Ethernet port is empty or contains a wrap plug should notimpact boot/IPL time or impact empty-port messages.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH10) - 387GB SFF-2 SSD converted for AIX/Linux
        (No Longer Available as of August 31, 2017)
        This special feature code is used when 'converting' a four-pack of387GB SSD which are mounted on a SFF-1 carrier/trays to four featuresall mounted on SFF-2 carrier/trays. SFF-2 carrier/trays can be placedin an EXP24S I/O Drawer. A special feature code was created becausea) the originally announced 387GB SFF-2 feature code is eitherwithdrawn from marketing or b) the server on which it was initiallyordered is withdrawn from marketing and the four-pack is an 'iniitalonly' orderable feature. IBM ordering/configuring systems don'tsupport converting to a withdrawn features or initial only features.It was decided to use the same approach for all 4-pack features forconsistency even if all feature codes for your specific model arestill available. This is ordered using one 'remove' and four 'adds'in the IBM ordering system and does not use the more common one-to-onefeature conversion. IBM ships one SFF-2 carrier/tray with each #EH10feature ordered. SFF-2 #EH10 is equivalent to one SFF-2 #ES0C. Usewhen converting fom SFF-1 four pack #ESRA.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH11) - 387GB SFF-2 SSD converted for AIX/Linux
        (No Longer Available as of August 31, 2017)
        This special feature code is used when 'converting' a four-pack of387GB SSD which are mounted on a SFF-1 carrier/trays to four featuresall mounted on SFF-2 carrier/trays. SFF-2 carrier/trays can be placedin an EXP24S I/O Drawer. A special feature code was created becausea) the originally announced 387GB SFF-2 feature code is eitherwithdrawn from marketing or b) the server on which it was initiallyordered is withdrawn from marketing and the four-pack is an 'iniitalonly' orderable feature. IBM ordering/configuring systems don'tsupport converting to a withdrawn features or initial only features.It was decided to use the same approach for all 4-pack features forconsistency even if all feature codes for your specific model arestill available. This is ordered using one 'remove' and four 'adds'in the IBM ordering system and does not use the more common one-to-onefeature conversion. IBM ships one SFF-2 carrier/tray with each #EH11feature ordered. SFF-2 #EH11 is equivalent to one SFF-2 #ES19. Usewhen converting fom SFF-1 four pack #ESRE.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH12) - 387GB SFF-2 SSD converted for IBM i
        (No Longer Available as of August 31, 2017)
        This special feature code is used when 'converting' a four-pack of387GB SSD which are mounted on a SFF-1 carrier/trays to four featuresall mounted on SFF-2 carrier/trays. SFF-2 carrier/trays can be placedin an EXP24S I/O Drawer. A special feature code was created becausea) the originally announced 387GB SFF-2 feature code is eitherwithdrawn from marketing or b) the server on which it was initiallyordered is withdrawn from marketing and the four-pack is an 'iniitalonly' orderable feature. IBM ordering/configuring systems don'tsupport converting to a withdrawn features or initial only features.It was decided to use the same approach for all 4-pack features forconsistency even if all feature codes for your specific model arestill available. This is ordered using one 'remove' and four 'adds'in the IBM ordering system and does not use the more common one-to-onefeature conversion. IBM ships one SFF-2 carrier/tray with each #EH12feature ordered. SFF-2 #EH12 is equivalent to one SFF-2 #ES0D. Usewhen converting fom SFF-1 four pack #ESRB.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH13) - 387GB SFF-2 SSD converted for IBM i
        (No Longer Available as of August 31, 2017)
        This special feature code is used when 'converting' a four-pack of387GB SSD which are mounted on a SFF-1 carrier/trays to four featuresall mounted on SFF-2 carrier/trays. SFF-2 carrier/trays can be placedin an EXP24S I/O Drawer. A special feature code was created becausea) the originally announced 387GB SFF-2 feature code is eitherwithdrawn from marketing or b) the server on which it was initiallyordered is withdrawn from marketing and the four-pack is an 'iniitalonly' orderable feature. IBM ordering/configuring systems don'tsupport converting to a withdrawn features or initial only features.It was decided to use the same approach for all 4-pack features forconsistency even if all feature codes for your specific model arestill available. This is ordered using one 'remove' and four 'adds'in the IBM ordering system and does not use the more common one-to-onefeature conversion. IBM ships one SFF-2 carrier/tray with each #EH13feature ordered. SFF-2 #EH13 is equivalent to one SFF-2 #ES1A. Usewhen converting fom SFF-1 four pack #ESRF.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH14) - GEN2-S Conversion Carrier for Feature ES0C 387GB SSD
        (No Longer Available as of August 31, 2017)
        This feature delivers one GEN2-S carrier as a MES upgrade. Thecarrier #EH14 accommodates one #ES0A 387GB SFF-1 SSD for AIX/Linux soit can be installed as a conversion in a GEN2 bay such as #5887 EXP24SSFF Gen2-bay Drawer. It is now functionally equivalent to #ES0C.
        Minimum required: 0
        Maximum allowed: 336 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EH16) GEN2-S Conversion Carrier for Feature ES0D 387GB SSD (IBM i)
        (No Longer Available as of August 31, 2017)
        This feature delivers a GEN2-S carrier as a MES upgrade. Thecarrier #EH16 accommodates #ES0B 387GB SFF-2 SSD for IBM i with eMLC.Once on the carrier it can be installed in a GEN2 bay such as #5887EXP24S SFF Gen2-bay Drawer. It is now functionally equivalent to#ES0D.
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EJ27) - PCIe Crypto Coprocessor No BSC 4765-001
        (No Longer Available as of March 31, 2017)
        Secure-key adapter provides both cryptographic coprocessor andcryptographic accelerator functions in a single PCIe card. Theadapter is well suited to applications requiring high-speed, security-sensitive, RSA acceleration, cryptographic operations for dataencryption and digital signing, secure management, and use ofcryptographic keys, or custom cryptographic applications. It providessecure storage of cryptographic keys in a tamper-resistant hardwaresecurity module designed to meet FIPS 140-2 level 4 securityrequirements. The adapter is a PCIe 4x full height - short card.
        #EJ27, #EJ28 and #EJ29 are all feature codes representing the samephysical card with the same CCIN of 4765, but different feature codesare used to indicate if a blind swap cassette is used and its type.#EJ27 indicates no blind swap cassette. #EJ28 indicates a Gen 3 blindswap cassette. #EJ29 indicates a Gen 4 blind swap cassette.
        #EJ27, EJ28 and EJ29 are identical to #4807, #4808 and #4809adapters which were manufactured after 2012, but different from #4807,#4808 and #4809 adapters manufactured prior to 2012.
        Other IBM PCIe Cryptographic Coprocessor adapter highlights
        Attributes provided: Cryptographic Coprocessor and AcceleratorFunctions
        Attributes required: One full-high PCIe slot which does not use ablind swap cassette
        For 8233-E8B: (#EJ27)
        AIX Version 5.3 supported
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        IBM i 6.1 with machine code 6.1.1
        IBM i 7.1 or later
        IBM i 7.2 or later
        Linux not supported
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EJ28) - PCIe Crypto Coprocessor Gen3 BSC 4765-001
        (No Longer Available as of March 31, 2017)
        Secure-key adapter provides both cryptographic coprocessor andcryptographic accelerator functions in a single PCIe card. Theadapter is well suited to applications requiring high-speed, security-sensitive, RSA acceleration, cryptographic operations for dataencryption and digital signing, secure management, and use ofcryptographic keys, or custom cryptographic applications. It providessecure storage of cryptographic keys in a tamper-resistant hardwaresecurity module designed to meet FIPS 140-2 level 4 securityrequirements. The adapter is a PCIe 4x full height - short card.
        #EJ27, #EJ28 and #EJ29 are all feature codes representing the samephysical card with the same CCIN of 4765, but different feature codesare used to indicate if a blind swap cassette is used and its type.#EJ27 indicates no blind swap cassette. #EJ28 indicates a Gen 3 blindswap cassette. #EJ29 indicates a Gen 4 blind swap cassette. 2
        #EJ27, EJ28 and EJ29 are identical to #4807, #4808 and #4809adapters which were manufactured after 2012, but different from #4807,#4808 and #4809 adapters manufactured prior to 2012.
        Other IBM PCIe Cryptographic Coprocessor adapter highlights
        http://www-03.ibm.com/security/cryptocards/
        Minimum required: 0
        Maximum allowed: 8 (Initial order maximum: 0)
        OS level required:
        Cannot be used with #5913
        Cannot be used with #5924
        Attributes provided: SAS RAID adapter firmware disables writecache until a second SAS RAID adapter is recognized.
        Attributes required: Every #ESA3 requires a 6Gb/s SAS RAIDadapter CR (#ESA3) on both this server and on another server that willpair up the SAS RAID adapter and enable the onboard caches tofunction.
        For 8233-E8B: (#EJS1)
        Minimum required: 0
        Maximum allowed: 17 (Initial order maximum: 0)
        OS level required:
        Attributes provided: Communicate configuration information to IBMManufacturing
        Attributes required: EXP24S Drawer, two PCIe2 1.8GB Cache RAIDSAS Adapters, two SAS YO cables
        For 8233-E8B: (#EJS3)
        AIX V7.1 with the 7100-03 Technology Level or later
        AIX V6.1 with the 6100-09 Technology Level or later
        AIX V7.1 with the 7100-02 Technology Level and Service Pack 4 orlater
        AIX V7.1 with the 7100-01 Technology Level and Service Pack 9 orlater
        AIX V6.1 with the 6100-08 Technology Level and Service Pack 4 orlater
        AIX V6.1 with the 6100-07 Technology Level and Service Pack 9 orlater
        AIX V5.3 with the 5300-12 Technology Level and Service Pack 9 orlater
        IBM i 6.1 with machine code 6.1.1
        IBM i 7.1 or later
        Red Hat Enterprise Linux 5.7 or later
        Red hat enterprise Linux 6.1 or later
        SUSE Linux Enterprise Server 10 Service Pack 4 or later
        SUSE Linux Enterprise Server 11 Service Pack 2 or later
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EJS4) - Specify Mode-2 1(4)ESA3 for EXP24S (#5887/#EL1S)
        This feature does not order or ship any hardware, but indicates toIBM config tools and to IBM Manufacturing that in this configurationone EXP24S SFF Gen2-bay Drawer (#5887/#EL1S) should be configured inMode 2 and be using four (two pairs) of PCIe2 1.8GB RAID SAS adapters(#ESA3) and two X SAS Cables.
        Minimum required: 0
        Maximum allowed: 8 (Initial order maximum: 0)
        OS level required:
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 0)
        OS level required:
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 0)
        OS level required:
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK51)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK52)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK53)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK54)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK55)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK56)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK57)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK58)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK59)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK60)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK61)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK62)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK64)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK65)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK66)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK67)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK68)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK69)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK70)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK71)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK72)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK73)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK74)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK75)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK76)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK77)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK78)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK79)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK80)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK81)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK82)
        Attributes provided: Keyboard
        Attributes required: USB Port
        For 8233-E8B: (#EK83)
        Attributes provided: Power cord
        Attributes required: None
        For 8233-E8B: (#ELC0)
        Live Partition Mobility, available only with PowerVM EnterpriseEdition, allows for the movement of a running partition from one PowerSystem server to another with no application downtime, resulting inbetter system utilization, improved application availability, and energysavings. With Live Partition Mobility, planned application downtime dueto regular server maintenance can be a thing of the past.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: n/a
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: Does not apply
        (#ELS1) - #ES11 Load Source Specify (387GB SSD SFF-1)
        This specify code indicates that a #ES11 Solid State Drive is beingused as the Load Source.
        Minimum required: 1
        Maximum allowed: 1 (Initial order maximum: 0)
        OS level required: See ES11
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ELS9) - #ES1A Load Source Specify (387GB SSD SFF-2)
        This specify code indicates that a #ES1A Solid State Drive is beingused as the Load Source.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: See ES1A
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ELSF) - #ES0F Load Source Specify (775GB SSD SFF-1)
        This specify code indicates that a #ES0F Solid State Drive is beingused as the Load Source.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: Communicate location of load source to IBMManufacturing
        Attributes required: #ES0H
        For 8233-E8B: (#ELSH)
        IBM i 6.1 with machine code 6.1.1, or later
        IBM i 7.1, or later
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#ELT9) #ES79 Load Source Specify (387GB SFF-2 SSD 5xx for IBM i)
        (No longer available as of January 18, 2019)
        Specify code indicates a #ES79 solid state drive (SSD) is used asthe Load Source.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 0)
        OS level required:
        Attributes provided: Communicate location of load source to IBMManufacturing
        Attributes required: #ES7F
        For 8233-E8B: (#ELTF)
        IBM i 7.1 TR11 or later
        IBM i 7.2 TR4 or later
        IBM i 7.3 or later
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EM08) - 8GB (2x4GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
        (No Longer Available as of August 31, 2017)
        Provides 8GB of system memory with two 4GB DIMMs.
        Minimum required: 0
        Maximum allowed: 16 (Initial order maximum: 16)
        OS level required:
        Attributes provided: Provides 16GB of system memory with two 8GBDIMMs
        Attributes required: Two empty memory DIMM slots
        For 8233-E8B: (#EM16)
        Refer to Software Requirements for AIX support
        Refer to Software Requirements for Linux support
        Refer to Software Requirements for IBM i support
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EM32) - 32GB (2x16GB) Memory DIMMs, 1066 MHz, 2Gb DDR3 DRAM
        (No Longer Available as of July 31, 2014)
        Provides 32GB of system memory with two 16GB DIMMs.
        Minimum required: 0
        Maximum allowed: 16 (Initial order maximum: 16)
        OS level required:
        Select one of the following cables to attach to port 1 (RVX port):
        The #2893 does not support the remote ring indicate function.
        There is a second port on the card with an integrated modem, butBisync is not supported on this port (labeled 'Port 0').
        Attributes provided: One full-high PCIe adapter with 1 port forBisync communications
        Attributes required: PCIe full high slot, external modem, cablefor the modem.
        For 8233-E8B: (#EN13)
        IBM i 6.1 supported
        IBM i 7.1 supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EN27) - 2 Port Async EIA-232 PCIe Adapter
        (No Longer Available as of March 11, 2016)
        Adapter provides connection for 2 asynchronous EIA-232 devices.Ports are programmable to support EIA-232 protocols, at a line speedof 128K bps. Two RJ45 connections are located on the rear of theadapter. To attach to devices using a 9-pin (DB9) connection, use anRJ45-to-DB9 converter. For convenience, one converter is includedwith this feature. One converter for each connector needing a DB9connector is needed.
        The converter cable shipped with the feature is a 10-pin RJ-45approximately 30 cm or 1 foot in length. 10-pin is often used for DCEdevices like modems. DTE devices may be able to use fewer pinconnections. Multiple RJ-45 pin out options are used and sold acrossthe industry. The #3930 feature provides an 8-pin RJ45-to-DB9converter cable. If an addition 10-pin RJ45-to-DB9 connector like thecable provided with the adapter is desired, it is commonly availablefrom multiple sources and identified as a serial cable with a Digipart number 76000239. It is also possible to look up the cable's pinout specifications and build your own cables.
        Note #EN27 and # EN28 are physically and electrically identicaladapters, except for the type of PCIe slot used (full-high or lowprofile).
        Minimum required: 0
        Maximum allowed: 12 (Initial order maximum: 0)
        OS level required:
        This adapter is functionally and electronically equivalent to#EN27 and is functionally equivalent to the earlier #5289 Asyncadapters.
        Minimum required: 0
        Maximum allowed: 12 (Initial order maximum: 0)
        OS level required:
        Attributes provided: 8-core processor card
        Attributes required: One processor card slot
        For 8233-E8B: (#EPA1)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Note: Minimum system firmware required is 7.3.
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPA2) - 6-core 3.7 GHz POWER7 Processor Card
        (No Longer Available as of August 31, 2017)
        6-core 3.7 GHz POWER7 processor card. There are 8 DDR3 DIMM slots onthe processor card.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required:
        Attributes provided: 4-core processor card
        Attributes required: One processor card slot
        For 8233-E8B: (#EPA3)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Note: Minimum system firmware required is 7.3.
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPA4) - 8-core 3.2 GHz POWER7 Processor Card
        (No Longer Available as of August 31, 2017)
        8-core 3.2 GHz POWER7 processor card. There are 8 DDR3 DIMM slots onthe processor card.
        Minimum required: 0
        Maximum allowed: 4 (Initial order maximum: 4)
        OS level required:
        Attributes provided: Activation of processor for #EPA1
        Attributes required: Feature number EPA1
        For 8233-E8B: (#EPB1)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPB2) - One Processor Activation for Processor Feature #EPA2
        (No Longer Available as of October 31, 2017)
        This feature will activate one processor on a #EPA2 processor card.
        Minimum required: 0
        Maximum allowed: 24 (Initial order maximum: 24)
        OS level required:
        Attributes provided: Activation of processor for #EPA3
        Attributes required: Feature number EPA3
        For 8233-E8B: (#EPB3)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPB4) - One Processor Activation for Processor Feature #EPA4
        (No Longer Available as of October 31, 2017)
        This feature will activate one processor on a #EPA4 processor card.
        Minimum required: 0
        Maximum allowed: 32 (Initial order maximum: 32)
        OS level required:
        Attributes provided: One processor activation for #EPA1
        Attributes required: Qualifying IBM Edition
        For 8233-E8B: (#EPF1)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPF2) - Zero-priced Processor Activation for #EPA2
        This feature will provide the customer with one processor activationat no additional charge. Available only with a qualifying IBM Edition.
        Minimum required: 0
        Maximum allowed: 12 (Initial order maximum: 12)
        OS level required:
        Attributes provided: One processor activation for #EPA3
        Attributes required: Qualifying IBM Edition
        For 8233-E8B: (#EPF3)
        AIX Version 7.1
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        AIX Version 6.1 with the 6100-05 Technology Level, or later
        AIX Version 6.1 with the 6100-04 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-03 Technology Level with Service Pack5, or later
        AIX Version 6.1 with the 6100-02 Technology Level with Service Pack8, or later
        AIX Version 5.3 with the 5300-12 Technology Level, or later
        AIX Version 5.3 with the 5300-11 Technology Level with Service Pack2, or later
        AIX Version 5.3 with the 5300-10 Technology Level with Service Pack4, or later
        AIX Version 5.3 with the 5300-09 Technology Level with Service Pack7, or later
        IBM i 7.1, or later
        IBM i 6.1 with i 6.1.1 machine code, or later
        Red Hat Enterprise Linux 6, or later
        Red Hat Enterprise Linux 5.5, or later
        SUSE Linux Enterprise Server 11 for the POWER 750 Express Server, orlater, with current maintenance updates available from Novell to enableall planned functionality
        SUSE Linux Enterprise Server 10 Service Pack 3 for the Power 750Express Server, with current maintenance updates available from Novell toenable all planned functionality
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EPF4) - Zero-priced Processor Activation for #EPA4
        This feature will provide the customer with one processor activationat no additional charge. Available only with a qualifying IBM Edition.
        Minimum required: 0
        Maximum allowed: 16 (Initial order maximum: 16)
        OS level required:
        Download Ibm Ultrium 5 Hh 3580 Tape Drive Drivers
        Multiple cable length feature codes are available. Choose thecable length that best matches the distance between the adapter andthe SAS I/O drawer.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 3)
        OS level required: None
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQ03) Quantity 150 of #3453 SAS YO Cable 10m - HD 6Gb Adapter to Enclosure
        This feature provides 150 10 meter SAS cables that connects a SASadapter to a SAS I/O enclosure. This YO cable has three connectors,one Mini-SAS HD (High Density)connector and two Mini SAS connectors.The Mini-SAS HD connector attaches to a SAS adapter such as the #59131.8GB RAID SAS Adapter. Both Mini SAS connectors attach to the sameI/O drawer (enclosure) such as a #5887 EXP24S SAS I/O drawer. Thiscable can support up to 6Gb throughput.
        Multiple cable length feature codes are available. Choose thecable length that best matches the distance between the adapter andthe SAS I/O drawer.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EQ0G) - Quantity 150 of #ES0G (775GB SSD SFF-2)
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES0G disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 2)
        OS level required:
        Attributes provided: Quantity of 150 #ES0H
        Attributes required: See feature ES0H
        For 8233-E8B: (#EQ0H)
        IBM i 6.1 with machine code 6.1.1, or later
        IBM i 7.1, or later
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQ19) - Quantity 150 of #ES19 (387GB SSD SFF-2)
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES19 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 2)
        OS level required:
        Attributes provided: Quantity of 150 #ES1A
        Attributes required: See feature ES1A
        For 8233-E8B: (#EQ1A)
        IBM i 7.1, or later
        IBM i 6.1 with machine code 6.1.1, or later
        AIX - not supported
        Linux - not supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQ38) - Quantity 150 of #1738 (856GB SFF-2 disk)
        (No Longer Available as of January 20, 2017)
        This feature ships a quantity of 150 #1738 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 3)
        OS level required:
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQ52) - Quantity 150 of #1752 (900GB SFF-2 disk)
        (No Longer Available as of January 20, 2017)
        This feature ships a quantity of 150 #1752 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 3 (Initial order maximum: 3)
        OS level required:
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQ78) - Quantity 150 of #ES78 387GB SFF-2 SSD 5xx
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES78 solid state drives(SSDs). The configurator may either generate this feature or allowusers to select this feature as they would any other single SSDfeature. This feature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 0)
        OS level required: Refer to feature #ES78
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EQ79) - Quantity 150 of #ES79 387GB SFF-2 SSD 5xx
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES79 solid state drives(SSDs). The configurator may either generate this feature or allowusers to select this feature as they would any other single SSDfeature. This feature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 0)
        OS level required: Refer to feature #ES79
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EQ7E) - Quantity 150 of #ES7E 775GB SFF-2 SSD 5xx
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES7E solid state drives(SSDs). The configurator may either generate this feature or allowusers to select this feature as they would any other single SSDfeature. This feature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 0)
        OS level required: Refer to feature #ES7E
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EQ7F) - Quantity 150 of #ES7F 775GB SFF-2 SSD 5xx
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ES7F solid state drives(SSDs). The configurator may either generate this feature or allowusers to select this feature as they would any other single SSDfeature. This feature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 2 (Initial order maximum: 0)
        OS level required: Refer to feature #ES7F
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EQ0C) - Quantity of 150 #ES0C
        (No Longer Available as of July 11, 2014)
        This feature ships a quantity of 150 #ES0C disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: Quantity of 150 #ES0D
        Attributes required: See feature ES0D
        For 8233-E8B: (#EQ0D)
        AIX - not supported
        Linux - not supported
        IBM i 7.1, or later
        IBM i 6.1 with 6.1.1 machine code, or later
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EQD2) - Quantity 150 of #ESD2 (1.1TB 10k SFF-2)
        (No Longer Available as of August 31, 2017)
        This feature ships a quantity of 150 #ESD2 disk units. Theconfigurator may either generate this feature or allow users to selectthis feature as they would any other single disk unit feature. Thisfeature remains on the inventory records.
        Minimum required: 0
        Maximum allowed: 8 (Initial order maximum: 8)
        OS level required:
        Attributes provided: See feature#ESD3
        Attributes required: 150 SFF-2 SAS bays in EXP24S drawers
        For 8233-E8B: (#EQD3)
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        Red Hat Enterprise Linux 5.8 for Power, or later
        Red Hat Enterprise Linux 6.2 for Power, or later
        SUSE Linux Enterprise 10, Service Pack 4, or later
        SUSE Linux Enterprise 11, Service Pack 2, or later
        IBM i - not supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ER05) - 42U Slim Rack
        Provides a 19-inch, 2.0 meter high rack with 42 EIA units of totalspace for installing rack mounted CECs and/or expansion units. The600mm wide rack fits within a data center's 24' floor tiles andprovides better thermal and cable management capabilities. Thefollowing features are required on the #ER05:
        Attributes provided: 19', 42U of vertical space
        Attributes required: #EC01 front door, #EC02 rear door or #EC05RDHX indicator
        For 8233-E8B: (#ER05)
        Attributes provided: None
        Attributes required: None
        For 8233-E8B: (#ERA5)
        AIX Version 6.1 with the 6100-06 Technology Level, or later
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: No
        (#ERA6) - Rational Appliance C/C++ Solution Tracking code
        (No Longer Available as of August 31, 2012)
        This feature is used to track the occurence of Rational ApplianceEnterprise Edition with C/C++ solution on the Power 750.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        ES0A and ES0B are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0A indicates usage by AIX, Linux or VIOS. ES0Bindicates usage by IBM i.
        Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers. Also drive was nottested with 512 byte sectors and thus JBOD mode for AIX/Linux is notsupported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        ES0A and ES0B are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0A indicates usage by AIX, Linux or VIOS. ES0Bindicates usage by IBM i.
        Limitation: can not be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers. Also drive was nottested with 512 byte sectors and thus JBOD mode for AIX/Linux is notsupported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        ES0C and ES0D are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0C indicates usage by AIX, Linux or VIOS. ES0Dindicates usage by IBM i.
        Limitation: can not be used in #5802/#5803 I/O drawers or insystem unit SFF SAS bays due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        ES0C and ES0D are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0C indicates usage by AIX, Linux or VIOS. ES0Dindicates usage by IBM i.
        Limitation: can not be used in #5802/#5803 I/O drawers or insystem unit SFF SAS bays due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        ES0E and ES0F are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0A indicates usage by AIX, Linux or VIOS. ES0Bindicates usage by IBM i.
        Limitation: cannnot be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers. Also drive was nottested with 512 byte sectors and thus JBOD mode for AIX/Linux is notsupported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        ES0E and ES0F are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0E indicates usage by AIX, Linux or VIOS. ES0Findicates usage by IBM i.
        Limitation: cannnot be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers. Also drive was nottested with 512 byte sectors and thus JBOD mode for AIX/Linux is notsupported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        ES0G and ES0H are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0G indicates usage by AIX, Linux or VIOS. ES0Hindicates usage by IBM i.
        Limitation: cannnot be used in #5802/#5803 I/O drawers or insystem unit SFF-1 SAS bays due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        ES0G and ES0H are physically identical drives which have differentfeature codes to help the IBM configuration tools understand how theSSD is used. ES0G indicates usage by AIX, Linux or VIOS. ES0Hindicates usage by IBM i.
        Limitation: cannnot be used in #5802/#5803 I/O drawers or insystem unit SFF-1 SAS bays due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        Attributes provided: None
        Attributes required: Sales Preapproval Required
        For 8233-E8B: (#ESC0)
        #ES10 and #ES11 are physically identical drives which havedifferent feature codes to help the IBM configuration tools understandhow the SSD is used. #ES10 indicates usage by AIX, Linux or VIOS.#ES11 indicates usage by IBM i.
        #ES10/ES11 and the earlier ES0A/ES0B are all 387GB SSD and can bemixed in the same array.
        Limitation: cannnot be used in #5887/#EL1S EXP24S Gen2 I/O drawerdue to physical difference in Gen1 and Gen2 carriers. Also drive wasnot tested with 512 byte sectors and thus JBOD mode for AIX/Linux isnot supported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        #ES10 and #ES11 are physically identical drives which havedifferent feature codes to help the IBM configuration tools understandhow the SSD is used. #ES10 indicates usage by AIX, Linux or VIOS.#ES11 indicates usage by IBM i.
        #ES10/ES11 and the earlier ES0A/ES0B are all 387GB SSD and can bemixed in the same array.
        Limitation: cannnot be used in #5887/#EL1S EXP24S Gen2 I/O drawerdue to physical difference in Gen1 and Gen2 carriers. Also drive wasnot tested with 512 byte sectors and thus JBOD mode for AIX/Linux isnot supported
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        This SFF (2.5') SAS Solid State Drive (SSD) is shipped from IBMwith 387 GB capacity formatted with 528 byte sectors. The drive issupported in SFF SAS bays in the #5802/#5803/#EL36 I/O drawers or insystem unit SFF-1 SAS bays. CCIN is 58B8.
        #ES19 and #ES1A are physically identical drives which havedifferent feature codes to help the IBM configuration tools understandhow the SSD is used. #ES19 indicates usage by AIX, Linux or VIOS.#ES1A indicates usage by IBM i.
        #ES19/ES1A and the earlier ES0C/ES0D are all 387GB SSD and can bemixed in the same array.
        Limitation: cannnot be used in #5802/5803/EL36 I/O drawers or in asystem unit SFF-1 SAS bay due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        This SFF (2.5') SAS Solid State Drive (SSD) is shipped from IBMwith 387 GB capacity formatted with 528 byte sectors. The drive issupported in SFF SAS bays in the #5802/#5803/#EL36 I/O drawers or insystem unit SFF-1 SAS bays. CCIN is 58B8.
        #ES19 and #ES1A are physically identical drives which havedifferent feature codes to help the IBM configuration tools understandhow the SSD is used. #ES19 indicates usage by AIX, Linux or VIOS.#ES1A indicates usage by IBM i.
        #ES19/ES1A and the earlier ES0C/ES0D are all 387GB SSD and can bemixed in the same array.
        Limitation: cannnot be used in #5802/5803/EL36 I/O drawers or in asystem unit SFF-1 SAS bay due to physical difference in Gen1 and Gen2carriers. Also drive was not tested with 512 byte sectors and thusJBOD mode for AIX/Linux is not supported
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 250)
        OS level required:
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 0)
        OS level required:
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 0)
        OS level required:
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 0)
        OS level required:
        Minimum required: 0
        Maximum allowed: 384 (Initial order maximum: 0)
        OS level required:
        Cannot be paired with feature 5913
        Cannot be used with non-paired feature 5924
        4k byte sector HDD/SSD are not supported. Only 5xx byte sectordrives are supported on this generation of PCIe adapter
        Attributes provided: PCIe2 1.8 GB Cache RAID SAS Adapter
        Attributes required: One PCIe slot per adapter and Mini-SAS HDconnector SAS cables
        For 8233-E8B: (#ESA3)
        AIX V7.1 with the 7100-03 Technology Level or later
        AIX V6.1 with the 6100-09 Technology Level or later
        AIX V7.1 with the 7100-02 Technology Level and Service Pack 4 orlater
        AIX V7.1 with the 7100-01 Technology Level and Service Pack 9 orlater
        AIX V6.1 with the 6100-08 Technology Level and Service Pack 4 orlater
        AIX V6.1 with the 6100-07 Technology Level and Service Pack 9 orlater
        AIX V5.3 with the 5300-12 Technology Level and Service Pack 9 orlater
        IBM i 6.1 with machine code 6.1.1
        IBM i 7.1 or later
        Red Hat Enterprise Linux 5.7 or later
        Red hat enterprise Linux 6.1 or later
        SUSE Linux Enterprise Server 10 Service Pack 4 or later
        SUSE Linux Enterprise Server 11 Service Pack 2 or later
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        Note: Attachment to the VIOS requires VIOS 2.2.3.1 or later, VIOS2.2.2.4 or later, VIOS 2.2.1.8 or later
        (#ESC7) - S&H
        (No Longer Available as of January 3, 2014)
        Shipping and handling.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required: None
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: No
        (#ESD0) - 1.1TB 10K RPM SAS SFF-1 Disk Drive (IBM i)
        (No Longer Available as of August 31, 2017)
        1.14TB SFF 10K RPM SAS disk drive in Gen1 carrier. Supported inSFF-1 SAS bays such as provided in most POWER7 system units or the#5802/ 5803 I/O drawers. Disk is formatted for 528 byte sectors.
        The drive can be reformatted to 512 byte sectors and used by AIX/Linux/VIOS.
        Limitation: cannnot be used in #5887 EXP24S Gen2 I/O drawer due tophysical difference in Gen1 and Gen2 carriers.
        Minimum required: 0
        Maximum allowed: 80 (Initial order maximum: 80)
        OS level required:
        Attributes provided: 1.20TB 10K RPM 2.5-inch SAS disk drivemounted on Gen-1 carrier (SFF-1)
        Attributes required: one SFF-1 SAS bay
        For 8233-E8B: (#ESD1)
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        Red Hat Enterprise Linux 5.8 for Power, or later
        Red Hat Enterprise Linux 6.2 for Power, or later
        SUSE Linux Enterprise 10, Service Pack 4, or later
        SUSE Linux Enterprise 11, Service Pack 2, or later
        IBM i - not supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ESD2) - 1.1TB 10K RPM SAS SFF-2 Disk Drive (IBMi)
        (No Longer Available as of August 31, 2017)
        1.14TB SFF 10K RPM SAS disk drive in Gen2 carrier. Supported inSFF-2 SAS bays such as provided in #5887 EXP24S I/O drawer.CCIN is 59CD. Disk is formatted for 528 byte sectors.
        The drive can be reformatted to 512 byte sectors and used by AIX/Linux/VIOS
        Limitation: cannot be used in #5802/5803 I/O drawers or in CECbays due to physical difference in Gen1 and Gen2 carriers.
        Minimum required: 0
        Maximum allowed: 504 (Initial order maximum: 250)
        OS level required:
        Attributes provided: 1.20TB 10K RPM 2.5-inch SAS disk drivemounted on Gen-2 carrier (SFF-2)
        Attributes required: one SFF-2 SAS bay in EXP24S drawer
        For 8233-E8B: (#ESD3)
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        Red Hat Enterprise Linux 5.8 for Power, or later
        Red Hat Enterprise Linux 6.2 for Power, or later
        SUSE Linux Enterprise 10, Service Pack 4, or later
        SUSE Linux Enterprise 11, Service Pack 2, or later
        IBM i - not supported, use VIOS
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#ESRA) - Four ES0A 387GB SFF-1 SSD for AIX/Linux with eMLC
        (No Longer Available as of January 3, 2014)
        Quantity 4 of feature ES0A.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided:Four 387GB SFF-1 SSD with 528 byte formatting
        Attributes required:Four SFF-1 SAS bays
        For 8233-E8B: (#ESRB)
        AIX - not supported
        IBM i 7.1, or later
        IBM i 6.1 with 6.1.1 machine code, or later
        Linux - not supported
        Initial Order/MES/Both/Supported: Initial
        CSU: Yes
        Return parts MES: No
        (#ESRC) - Four ES0C 387GB SFF-2 SSD for AIX/Linux with eMLC
        (No Longer Available as of January 3, 2014)
        Quantity 4 of feature ES0C
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        VIOS VIOS 2.2.1.0 or later
        (#ESRD) - Four ES0D 387GB SFF-2 SSD for IBM i with eMLC
        (No Longer Available as of January 3, 2014)
        Quantity 4 of feature ES0D
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: Four 387GB SFF-1 SSD formatted with 528 bytesectors
        Attributes required: Four SFF-1 SAS bays
        For 8233-E8B: (#ESRE)
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        Linux supported
        IBM i - not supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#ESRF) - Four ES11 387GB SFF-1 SSD for IBM i
        (No Longer Available as of January 3, 2014)
        Quantity 4 of feature ES11
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: Four 387GB SFF-2 SSD formatted with 528 bytesectors
        Attributes required: Four SFF-2 SAS bays in EXP24S drawer
        For 8233-E8B: (#ESRG)
        AIX Version 6.1 supported
        AIX Version 7.1 supported
        Linux supported
        IBM i - not supported
        Refer to Software Requirements for specific O/S levels supported
        Initial Order/MES/Both/Supported: Initial
        CSU: N/A
        Return parts MES: Does not apply
        (#ESRH) - Four ES1A 387GB SFF-2 SSD for IBM i
        (No Longer Available as of January 3, 2014)
        Quantity 4 of feature ES1A.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: 1TB RDX rugged disk cartridge
        Attributes required: None
        For 8233-E8B: (#EU01)
        See RDX Docking Station
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EU03) RDX USB Internal Docking Station for Removable Disk Cartridge
        (No longer available as of April 19, 2019)
        USB Internal Docking Station accommodates RDX removable diskcartridge of any capacity. The disk are in a protective ruggedcartridge enclosure that plug into the docking station. The dockingstation holds one removable rugged disk drive/cartridge at a time.The rugged removable disk cartridge and docking station providessaves, restores and backs up similar to tape drive. This can be anexcellent alternative to DAT72, DAT160, 8mm, and VXA-2 and VXA-320tapes. The drive is controlled by an internal USB port in the systemunit. CCIN: 632C-0D4
        #EU03 is a follow on product to the #1103 RDX docking station.#EU03 has identical function and performance to the external #EU04 RDXdocking station.
        #EU03 is controlled by an internal USB port in the system unit.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: USB RDX External Docking Station, 3M USBcable, 1M power cord with universal adapter 100-240 VAC, 50-60Hz inputproviding 15W DC to the docking station.
        Attributes required: One USB port and at least one #EU01, #1107or #EU08 Removable Disk Drive Cartridge such as #EU01, #1107 or #EU08
        For 8233-E8B: (#EU04)
        AIX V7.1 with the 7100-02 Technology Level, or later
        AIX V7.1 with the 7100-01 Technology Level with Service Pack 8, orlater (planned availability: December 19, 2012)
        AIX V7.1 with the 7100-00 Technology Level with Service Pack 6, orlater (planned availability: December 19, 2012)
        AIX V6.1 with the 6100-08 Technology Level, or later
        AIX V6.1 with the 6100-07 Technology Level, with Service Pack 8,or later (planned availability: December 19, 2012)
        AIX V6.1 with the 6100-06 Technology Level with Service Pack 10,or later (planned availability: December 19, 2012)
        IBM i 7.1 or later
        SUSE Linux Enterprise Server 10 Service Pack 4, or later
        SUSE Linux Enterprise Server 11 Service Pack 2, or later ;li.RedHat Enterprise Linux for POWER V6.3 for POWER, or later
        Red Hat Enterprise Linux for POWER V5.8 for POWER, or later
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EU07) RDX SATA Internal Docking Station for Removable Disk Cartridge
        (No Longer Available as of March 8, 2016)
        SATA Internal Docking Station accommodates RDX removable diskcartridge of any capacity. The disk are in a protective ruggedcartridge enclosure that plug into the docking station. The dockingstation holds one removable rugged disk drive/cartridge at a time.The rugged removable disk cartridge and docking station backs upsimilar to tape drive. This can be an excellent alternative to DAT72,DAT160, 8mm, and VXA-2 and VXA-320 tapes. CCIN: 632C-0D4
        Note the SATA RDX docking station is functionally identical to theUSB RDX docking station.
        The SATA interface is controlled by internal SAS/SATA controller ofthe system unit.
        Minimum required: 0
        Maximum allowed: 1 (Initial order maximum: 1)
        OS level required:
        Attributes provided: 320 GB RDX rugged disk/cartridge
        Attributes required: One docking station such as #1123 or #1103or #1104
        For 8233-E8B: (#EU08)
        See RDX Docking Station
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EU15) - 1.5TB Removable Disk Drive Cartridge
        (No Longer Available as of November 30, 2015)
        The 1.5 TB Removable Disk Drive Cartridge provides a RDX diskdrive in a rugged cartridge to be used in an RDX Internal andExternal Docking Station such as (#1103, #1104 or #1123, #EU03,#EU04 ,#EU23, or #EU07. 1.5TB is uncompressed. Compression/decompression is provided by the operating system, not the driveitself. Feature EU015 is not entitled under the IBM MaintenanceAgreement, if one is purchased.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 250)
        OS level required:See Docking station for OS requirements
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        (#EU16) - 80/160GB DAT160 USB Tape Drive
        (No Longer Available as of February 14, 2014)
        The Internal Tape Drive is a 5.25-inch, half-high for save/ restoreand archive functions. This DDS Gen6 tape drive uses the larger IBMDAT160 and 4-mm data cartridges and is compression capable, providinga capacity of up to 160 GB (assuming 2:1 compression ratio).
        This drive attaches internally to the USB port of the console ofthe server (no visible external cable). The USB port on the consoleis not available for other connections when #EU16 is installed. ThisUSB connection differs from SAS #5619 DAT160 Tape Drive which attachesto the integrated SAS adapter in the server. Thus the USB DAT160helps avoid tape/disk bandwidth contention possible with a SAS DAT160drive.
        Characteristics
        Attributes provided: 4mm tape capability, Test Cartridge, and aCleaning Cartridge
        Attributes required: One 1.6-inch (41mm) half-high media bay
        For 8233-E8B: (#EU16)
        AIX Version 7.1 with the 7100-01 Technology level and Service pack4 or later
        AIX Version 7.1 with the 7100-00 Technology Level and Service Pack6 or later (planned availability 6/29/2012)
        AIX Version 6.1 with the 6100-07 Technology Level and Service Pack4 or later
        AIX Version 6.1 with the 6100-06 Technology Level and service Pack8 or later (planned availability 6/29/2012)
        AIX Version 5.3 with the 5300-12 Technology Level and Service Pack6 or later (planned availability 6/29/2012)
        Note: AIX 5.3
        service extension is required
        IBM i 6.1 with 6.1.1 machine code, or later supportedthrough VIOS 2.2.1.4
        Red Hat Enterprise Linux 5.8 for POWER, or later
        Red Hat Enterprise Linux 6.2 for POWER, or later
        Novel SUSE Linux Enterprise 10, Service Pack 4, or later
        Novel SUSE Linux Enterprise 11 Service Pack 2, or later
        Initial Order/MES/Both/Supported: Both
        CSU: Yes
        Return parts MES: No
        Note: VIOS 2.2.1.4 or later
        (#EU2T) - 2TB Removable Disk Drive Cartridge (RDX)
        The 2.0TB Removable Disk Drive Cartridge provides a RDX disk drivein a rugged cartridge to be used in an RDX Internal and ExternalDocking Station such as (#1103, #1104 or #1123, #EU03, #EU04 ,#EU23,or #EU07. 2.0TB is uncompressed. Compression/ decompression isprovided by the operating system, not the drive itself. Feature EU2Tis not entitled under the IBM Maintenance Agreement, if one ispurchased.
        Minimum required: 0
        Maximum allowed: 9999 (Initial order maximum: 0)
        OS level required: See docking station for OS requirements
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EUC6) - Core Use HW Feature
        A Service Provider (SP) under a 'revenue payment' contract with IBMpays IBM a percentage of revenue generated on their infrastructure usedto deliver cloud services. The contract stipulates that each quarter theservice provider calculates the amount due IBM and then puchases aquantity of features that satisfies the required payment. Each occuranceof this feature represents one billing unit.
        Minimum required: 0
        Maximum allowed: 250 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        (#EUC7) - Core Use HW Feature 10X
        A Service Provider (SP) under a 'revenue payment' contract with IBMpays IBM a percentage of revenue generated on their infrastructureused to deliver cloud services. The contract stipulates that eachquarter the service provider calculates the amount due IBM and thenpurchases a quantity of features that satisfies the required payment.Each occurrence of this feature represents ten billing units.
        Minimum required: 0
        Maximum allowed: 250 (Initial order maximum: 0)
        OS level required: None
        Initial Order/MES/Both/Supported: MES
        CSU: Yes
        Return parts MES: No
        Not available.
        
        Back to top
        Accessories
        None.
        Customer replacement parts
        None.
        
        Back to top
        Machine elements
        Not available.
        
        Back to top
        Supplies
        None.
        Supplemental media
        None.
        Back to top
        Trademarks
        (R), (TM), * Trademark or registered trademark of InternationalBusiness Machines Corporation.
        ** Company, product, or service name may be a trademark or servicemark of others.
        Windows is a trademark of Microsoft Corporation.
        Terms of use
        IBM products and services which are announced and availablein your country can be ordered under the applicable standardagreements, terms, conditions, and prices in effect at thetime. IBM reserves the right to modify or withdraw thisSales Manual at any time without notice. This Sales Manualis provided for your information only. Additional terms ofuse are located at
        Terms of use
        Ernie Ball Music Man Stingray 5 Hh
        
        Musicman Stingray 5 Hh Sky Blue
        © IBM Corporation 2019.

Product life cycle dates

Abstract

Model abstract 8233-E8B

Highlights

Description

Accessibility by people with disabilities

Section 508 of the US Rehabilitation Act

Models

Model summary matrix

Customer setup (CSU)

Devices supported

Model conversions

Technical description

Physical specifications

Software requirements

Publications

Features

Features - No charge

Special Features - Plant and/or Field Installable

Feature availability matrix

Feature descriptions

(#0010) - One CSC Billing Unit

(#0011) - Ten CSC Billing Units

(#0032) - Specify Code for External High Speed Modem

(#0041) - Device Parity Protection-All, Specify Code

(#0047) - Device Parity RAID-6 All, Specify Code

(#0266) - Linux Partition Specify

(#0275) - CSC Specify

(#0296) - Specify Custom Data Protection

(#0348) - V.24/EIA232 6.1m (20-Ft) PCI Cable

(#0349) - V.24/EIA232 15.2m (50-Ft) PCI Cable

(#0353) - V.35 6.1m (20-Ft) PCI Cable

(#0354) - V.35 15.2m (50-Ft) PCI Cable

(#0356) - V.36 6.1m (20-Ft) PCI Cable

(#0359) - X.21 6.1m (20-Ft) PCI Cable

(#0360) - X.21 15.2m (50-Ft) PCI Cable

(#0365) - V.24/EIA232 (80-Ft) PCI Cable

(#0444) - CBU Specify

(#0456) - Customer Specified Placement

(#0555) - 19 inch, 1.3 meter high rack

(#0566) - IBM i 6.1 with 6.1.1 Machine Code Specify Code

(#0599) - Rack Filler Panel Kit

(#0709) - Flexible Thermal Settings for NEBS Applications

(#0710) - Balanced Warehouse Solution Indicator

(#0711) - IBM mCommerce Application Solution Indicator

(#0712) Power Cloud Solution Integrated Solution Indicator for Order Routing

(#0836) - #4328 Load Source Specify

(#0839) - #3677 Load Source Specify

(#0841) - #4329 Load Source Specify

(#0851) - #1884 Load Source Specify

(#0854) - #1909 Load Source Specify

(#0856) - #1911 Load Source Specify

(#0871) - #1947 Load Source Specify

(#0872) - #1948 Load Source Specify

(#0894) - #ES0D Load Source Specify

(#0911) - #ESD2 Load Souce Specify (1.1TB 10k SFF-2)

(#1103) - USB Internal Docking Station for Removable Disk Drive

(#1106) - USB 160 GB Removable Disk Drive

(#1108) - Juniper EXP4200 Ethernet Switch

(#1109) - IBM Ethernet Switch J48E

(#1111) - CAT5E Ethernet Cable, 3M BLUE

(#1112) - CAT5E Ethernet Cable, 10M BLUE

(#1113) - CAT5E Ethernet Cable, 25M BLUE

(#1114) - Smart Analytics System routing indicator

(#1115) - CAT5E Ethernet Cable, 3M GREEN

(#1116) - CAT5E Ethernet Cable, 10M GREEN

(#1117) - CAT5E Ethernet Cable, 25M GREEN

(#1118) - CAT5E Ethernet Cable, 3M YELLOW

(#1119) - CAT5E Ethernet Cable, 10M YELLOW

(#1121) - CAT5E Ethernet Cable, 25M YELLOW

(#1140) - Custom Service Specify, Rochester Minn, USA

(#1406) - 200V 16A 4.3m (14-Ft) TL Line Cord

(#1413) - 125V 4.3m (14-Ft) Line Cord

(#1414) - 200V 1.8m (6-Ft) Locking Line Cord

(#1415) - 200V 1.8m (6-Ft) Watertight Line Cord

(#1416) - 200V 4.3m (14-Ft) Locking Line Cord

(#1417) - 200V 4.3m (14-Ft) Watertight Line Cord

(#1418) - 4.3m 200V/16A Power Cord S. Africa

(#1419) - 4.3m 200V/16A Power Cord Israel

(#1420) - 4.3m 200V/16A Power Cord EU/Asia